5Pcs Spindle Nut Sockets Axle Nut Socket Set for Ford ChevyDodge, 1/2” Drive


Spindle Nut Remover & Installer

5 Size Spindle Nut Socket Tool Kit makes your job easier when removing and installing different sizes of 4-slot and 6-slot spindle nuts or bearing. Suitable for 4WD SUVs and light trucks, Chevrolet GMC Chevy, Ford Dana 50 or 60 axle F250, F350, Dana 44, Dodge, Blazer and Jimmy, Ford Bronco, Ranger, Explorer, International 1100 series, Ramcharger and more. Use with 1/2" drive tools.Built to exceed OE Part # 648636.


Easier Work

Simply use with a 1/2” torque wrench, ratchet, or breaker bar to help remove the stubborn axle hub nut. Then, The 4 or 6 lug teech socket will lock the nut more firmly, and engages the nut correctly. Easy removal of spindle nuts on the inside of the hub to replace emergency brakes and more. No more worry about frustrating axle locknut removing work. (Warm Tips: Not suitable for impact wrench.)


Superior Material

Heavy duty impact grade lug spindle nut socket set is constructed from chrome-vanadium steel (CR-V) with a black oxide finish for maximum strength and longevity that resists rust and corrosion. Not easy to round out.


Convenient & Robust Storage Case

Constructed with high-density blow-molded polyethylene, ensuring unparalleled protection against rust, dents, and scratches. Temperature and chemical tolerant, water resistance. Each socket is neatly organized. Convenient for storage and transport.


What You Get

5 Size Spindle Nut Set includes: 2-3/4" x 4 Lug Outer Spindle Nut Socket; 2-5/8" x 6 lug Outer Spindle Nut Socket; 2-3/8" x 4 lug Outer Spindle Nut Socket; 2-1/2" x 4 lug Inner Spindle Nut Socket; 2-1/4" x 4 lug Inner Spindle Nut Socket; Storage Case. Easy to remove spindle nuts, bearing, front axle spindle nut, hub nut, wheel drive nut and more.


2-3/8" x 4 lug Outer For Chevrolet/ GMC: 1/2-ton Pickup, Blazer and Jimmy. For Ford: Bronco,Bronco ll, Ranger, Explorer 1/2- and3/4-ton F-Series Pickup w/spline-type hub. For International: 1100 series, For Dodge: 1/2-ton Pickupand Ramcharger.
2-5/8" x 6 lug Outer 3/4 and 1-ton for Ford Pickup for Bronco 1978 and newer. 3/4 and 1-ton for GMC and For Chevrolet Pickups 1973 and newer.
2-1/4" x 4 lug Inner For Chevrolet/GMC: 1/2-ton Pickup, Blazer and Jimmy.
2-3/4" x 4 Lug Outer For Ford 1985 and newer F250/350 2WD rear axles with"high shear" type rotating locknut.
2-1/2" x 4 lug Inner For Ford F250/350 with heavy duty axles 1985 and newer; For Ford F350 (late models) with Dana 50 or 60 axle For Chevrolet and GMc 30 Series 1987 only; for Chevrolet and GMC w/ Dana 50 independent front suspension; For Chevrolet and GMC with Dana 60 with monobeamfront suspension.


 

 

 

Policy Preview

Payment

We accept PayPal, MasterCard, Visa, American Express, Discover and etc payment.

All Payments must be Confirmed (Shipping and billing addresses must match) Payment is required within 7 days from the date of the auction ending.

Delivery Details

1.We offer free shipping on all products within the continental 48 states via USPS, Or UPS.

2.Your item will be carefully packed and shipped within 1 business day after payment received.(Orders are not processed on weekend & holidays.)

Return & Refund

1. Please read the item description and check the pictures carefully before bidding. Return or refund is available only if item DOA or there's error in item description causing the item not fitting your need. In such cases, seller pays for all related shipping cost if any.

2.Returns are also acceptable if buyer purchased this by mistake and item still in good condition for reselling. Buyer is responsible for all related shipping cost.

Warranty

We offer 1Year warranty for our products. In the event the item should fail due to manufacturing defects during intended use, we will replace the part by free of charge. Any modifications of the item will void all warranty coverage.

Feedback

Thank you for your purchase, We maintain high standards of excellence and strive for 100% customer satisfaction!Feedback is very important to us. We request that you contact us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns. I’ll get back to you as soon as I can. Thanks!

About Us

If you're looking to buy in bulk or looking for a long term part supplier, please contact me directly. We will provide you the best products and service. We offer 100% Customer Satisfaction , if you have any questions , please let us know and we will do our best to rectify the situation . 

Spindle Nut Remover & Installer

5 Size Spindle Nut Socket Tool Kit makes your job easier when removing and installing different sizes of 4-slot and 6-slot spindle nuts or bearing. Suitable for 4WD SUVs and light trucks, Chevrolet GMC Chevy, Ford Dana 50 or 60 axle F250, F350, Dana 44, Dodge, Blazer and Jimmy, Ford Bronco, Ranger, Explorer, International 1100 series, Ramcharger and more. Use with 1/2" drive tools.Built to exceed OE Part # 648636.


Easier Work

Simply use with a 1/2” torque wrench, ratchet, or breaker bar to help remove the stubborn axle hub nut. Then, The 4 or 6 lug teech socket will lock the nut more firmly, and engages the nut correctly. Easy removal of spindle nuts on the inside of the hub to replace emergency brakes and more. No more worry about frustrating axle locknut removing work. (Warm Tips: Not suitable for impact wrench.)


Superior Material

Heavy duty impact grade lug spindle nut socket set is constructed from chrome-vanadium steel (CR-V) with a black oxide finish for maximum strength and longevity that resists rust and corrosion. Not easy to round out.


Convenient & Robust Storage Case

Constructed with high-density blow-molded polyethylene, ensuring unparalleled protection against rust, dents, and scratches. Temperature and chemical tolerant, water resistance. Each socket is neatly organized. Convenient for storage and transport.


What You Get

5 Size Spindle Nut Set includes: 2-3/4" x 4 Lug Outer Spindle Nut Socket; 2-5/8" x 6 lug Outer Spindle Nut Socket; 2-3/8" x 4 lug Outer Spindle Nut Socket; 2-1/2" x 4 lug Inner Spindle Nut Socket; 2-1/4" x 4 lug Inner Spindle Nut Socket; Storage Case. Easy to remove spindle nuts, bearing, front axle spindle nut, hub nut, wheel drive nut and more.


2-3/8" x 4 lug Outer For Chevrolet/ GMC: 1/2-ton Pickup, Blazer and Jimmy. For Ford: Bronco,Bronco ll, Ranger, Explorer 1/2- and3/4-ton F-Series Pickup w/spline-type hub. For International: 1100 series, For Dodge: 1/2-ton Pickupand Ramcharger.
2-5/8" x 6 lug Outer 3/4 and 1-ton for Ford Pickup for Bronco 1978 and newer. 3/4 and 1-ton for GMC and For Chevrolet Pickups 1973 and newer.
2-1/4" x 4 lug Inner For Chevrolet/GMC: 1/2-ton Pickup, Blazer and Jimmy.
2-3/4" x 4 Lug Outer For Ford 1985 and newer F250/350 2WD rear axles with"high shear" type rotating locknut.
2-1/2" x 4 lug Inner For Ford F250/350 with heavy duty axles 1985 and newer; For Ford F350 (late models) with Dana 50 or 60 axle For Chevrolet and GMc 30 Series 1987 only; for Chevrolet and GMC w/ Dana 50 independent front suspension; For Chevrolet and GMC with Dana 60 with monobeamfront suspension.