WOODPECKER LED.B: (5S Curing Light)
Feature:
100% guaranteed original Woodpecker. Each item has unique serial number, which indicate in which region it is supposed to be sold. Woodpecker is strict with that regulation of according regional sale. As ours are to be sold in China only, we have to erase it from item, which would cause scratch-like mark. That is no damage, pls note this clearly!
Wireless.
Time setting: 5s, 10s, 15s, 20s.
Large capacity battery. A full charge can be used for more than 500 times continuously under 10s working time mode.
Low standby power consumption with seventy days` standby time.
Constant light intensity. The solidification effect is not affected by the consumption of remaining power.
Technical Parameter
Power input: AC100V-240V 50Hz/60Hz
Light output: 1000mW/cm² -1200mW/cm²
Net weight: 145g
Dimensions: 260mm×31mm×34mm
LED B Packing List
1 X Curing light
1 X High capacitance rechargeable battery
1 X Charger
1 X Charger socket
***********************************************************************************************************************************************************************
LED D (5S Curing Light)
Wireless.
The battery can be replaced.
Three working modes: Full, Ramping, Pulse.
Time setting: 5s, 10s, 15s, 20s, 25s, 30s, 35s, 40s.
A full charge can be used for over 400 times. (10s/time)
Constant light intensity, the solidification effect is not affected by the consumption of remaining power.
With wire or wireless. It can run directly on commercial power supply whilst the battery runs out.
Technical Details:
Power input AC100V-240V 50Hz/60Hz
Light output 850mW/cm² - 1000mW/cm²
Net weight 143g
Dimensions 264mm × 32mm × 37mm
Packing List:
1 X Curing light
1 X High capacitance rechargeable battery
1 X Charger
1* Curing light holder
************************************************************************************************************************************************************************
LY-A180: (1S Curing Light)
Classic rechargeable light curing unit: Environmental colorful plastic shell; Lotus charging pedestal; Handle can be placed horizontally / upright, to ensure that the light guide stick is not easy to break; 5W high power LED; High permeability rate of glass fiber-optic, strong, flashing, gradually strong 3 modes, large capacity lithium battery, automatic standby/shutdown, low battery warning, suitable for all brands of resin materials; long standby time of 90 days or more. Be charged one time, in accordance with each working time of 20 seconds, it can be used continuously for more than 130 times.
Operating mode diagram:
1. Power switch
2. Low battery alert
3. Strong mode indicator light
4. Flashing mode indicator light
5. Gradually strong mode indicator light
6. Mode select switch
7. Be adjusted in 5-40 seconds, shut down automatically . Without any operation in 20 seconds.
Technical data:
Package: 190×98×60m
Suitable temperature: 5℃~50℃
Solidify time and depth: 5s/3mm
Light wavelength: 420-480nm
Light intensity: 1200-2000mw/cm2
Gross Weight: 0.30Kg
Input Voltage: 110V-240VAC, 50-60Hz
Output Voltage: DC 4.2V
Battery: Lithium-ion battery
Capability of Battery: 2200mA
***********************************************************************************************************************************************************************
DENTMAX LED.B:(5S Curing Light)
Feature:
100% guaranteed original DENTMAX.
Wireless.
Time setting: 5s, 10s, 15s, 20s.
Large capacity battery. A full charge can be used for more than 500 times continuously under 10s working time mode.
Low standby power consumption with seventy days` standby time.
Constant light intensity. The solidification effect is not affected by the consumption of remaining power.
Technical Parameter
Power input: AC100V-240V 50Hz/60Hz
Light output: 1000mW/cm² -1200mW/cm²
Net weight: 145g
Dimensions: 260mm×31mm×34mm
LED B Packing List
1 X Curing light
1 X High capacitance rechargeable battery
1 X Charger
1 X Charger socket
***********************************************************************************************************************************************************************
Xlite2 neo: (1S Curing Light)
Light Source: Broad Band LED;
Wavelength Range: 385 - 515 nm;
Light Intensity: > 2300mW/cm²;
Battery: Lithium-ion battery (total running time when the battery is fully charged: at least 80 minutes);
Power Adapter Input Power: AC 100-240V 50 / 60Hz;
Charging time: about 45 minutes.
Size:Handle: Φ20 mm × 240 mm; Charging stand: Φ63 mm × 30 mm(all of the above are the largest size)
Weight: Handle: 96 grams; Charging seat: 99 grams;
Operating ambient temperature: + 10℃ - + 40℃(+ 50 °F - + 70°F);
Operating relative humidity: 30% - 75%;
Operating environment pressure: 700hPa - 1060hPa;
Color Choose: White/ Black （Radomly color）
Package Contents:
1 × host handle;
1 × charging base;
1 × power adapter;
1 × user manual.
Operation and function description:
The entire handle is only one button, light built-in button.
1. For the first time, charge the light curing handle first. Plug the USB
2. cable of the charger into the USB port of the power adapter, plug the power adapter into the power socket, and finally
Put the handle on the charging stand; or, insert the USB cable plug of the charging stand into the USB port of the computer, and then put
the handle on the charging stand. Charging instructions are as follows:
| Emerald Flashing | Battery charging;
| Emerald green light | battery fully charged; handle removed the
charging seat, the restoration of the previous working mode.
3. Working mode selection, by pressing the button for 2 seconds to
4. release to switch the working mode.
| Blinking Blue | Progressive mode, working time 10 seconds, light intensity 0-5 seconds from 0-1200mW / cm², 5-10 seconds 1200mW/cm².
| Solid blue | Fast mode, working time 3 seconds, light intensity 2300mW / cm ²
3. Turn the light curing lamp on and off, press the button briefly.
4. Switch machine, in standby mode, press the button a short time to open the instrument; stop any operation for 60 seconds, into the ultra-low power standby.
Package including: 1 Set ( randomly color)
***********************************************************************************************************************************************************************
DMXDENT iLED Ⅱ(White/Black Optional): (1S Curing Light)
Feature:
Light Source: Broad Band LED;
Wavelength Range: 385 - 515 nm;
Light Intensity: > 2300mW/cm²;
Battery: Lithium-ion battery (total running time when the battery is fully charged: at least 80 minutes);
Power Adapter Input Power: AC 100-240V 50 / 60Hz;
Charging time: about 45 minutes.
Size:Handle: Φ20 mm × 240 mm; Charging stand: Φ63 mm × 30 mm(all of the above are the largest size)
Weight: Handle: 96 grams; Charging seat: 99 grams;
Operating ambient temperature: + 10℃ - + 40℃(+ 50 °F - + 70°F);
Operating relative humidity: 30% - 75%;
Operating environment pressure: 700hPa - 1060hPa;
Color Choose: White/ Black （choose the color you like）
Package Contents:
1 × host handle;
1 × charging base;
1 × power adapter;
1 × user manual.
Operation and function description:
The entire handle is only one button, light built-in button.
1. For the first time, charge the light curing handle first. Plug the USB
2. cable of the charger into the USB port of the power adapter, plug the power adapter into the power socket, and finally
Put the handle on the charging stand; or, insert the USB cable plug of the charging stand into the USB port of the computer, and then put
the handle on the charging stand. Charging instructions are as follows:
| Emerald Flashing | Battery charging;
| Emerald green light | battery fully charged; handle removed the
charging seat, the restoration of the previous working mode.
3. Working mode selection, by pressing the button for 2 seconds to
4. release to switch the working mode.
| Blinking Blue | Progressive mode, working time 10 seconds, light intensity 0-5 seconds from 0-1200mW / cm², 5-10 seconds 1200mW/cm².
| Solid blue | Fast mode, working time 3 seconds, light intensity 2300mW / cm ²
3. Turn the light curing lamp on and off, press the button briefly.
4. Switch machine, in standby mode, press the button a short time to open the instrument; stop any operation for 60 seconds, into the ultra-low power standby.
***********************************************************************************************************************************************************************
2001B: (1S Curing Light)
Specifications:
Light Density ≥2700mW/cm
Battery ：3500mAH
Input Voltage :AC100-240
Power: 12W
Wavelength：400nm - 490nm
Features:
1. Lithium battery
2. Pure LED blue light and no flicker
3. Aluminium body
4. 3 second can make it! (selection from 2-6 seconds)
Package：
1. Light guide
2. Circular eye-protector
3. power adapter
4. Charging base
5. Main body
6. Manual
***********************************************************************************************************************************************************************
LY-C240:(1S Curing Light)
Feature:
1.Super 10W high power LED bulb.
2.360° rotating light source, 90° right angle illumination.
3.The 3 mm resin can be cured by strong light for 1 second, and the light intensity is greater than 2000 mw/cm2
4.The outer casing is made of environmentally friendly plastic material, which is beautiful and practical.
5.Strong light, pulse, fade-on three working mode selection, 1~40 seconds working time.
Parameters:
Packing specification:10.25*6.5*2.56in
Net Weight:26.1 oz
Gross Weight:28.2oz
Output voltage:110v-220VAC, 50-60HZ
Output voltage:DC5V
Battery: Lithium ion battery
Capability of battery:2200mah
Battery voltage:3.7V
Suitable temperature:5°~50°C
Relative humidity:≤80%
Solidify time and depth:1s/3mm
Light wavelength:420-480nm
Light intensity:1200-2500 mw/cm2
Package Included:
Subject*1
Power adapter*1
Charging base*1
Instruction manual*1
***********************************************************************************************************************************************************************
MAXCURE9 (Radom Color) : (1S Curing Light)
Features:
Power Input: 100-240VAC 50Hz/60Hz
Power Output: 5V DC/1A
Wave length: 385nm-515nm
Light intensity: 1000mW/cm2– 2500mW/cm2
Battery: 2600mA
Description
Light cure unit is used for the principle of ray radiation to solidify the light-sensitive resin by shooting at it in a short time, it is used to restore teeth and solidify material for whitening teeth.
Indication
Used for polymerization of light cure resin-based composites. It can be used on several different dental materials that are curable by light.
Feature
1.Dual intensity mode
P1 High intensity mode
Curing time For orthodontic brackets, post and core and curing photosensitive adhesive in porcelain veneer.
High intensity mode
Constant intensity: 2300-2500mw/cm Used for quick curing, ensuring enough curing depth, more efficient
Time setting: 1s. 3s
P2 General intensity mode
Curing time For Normal resin.
General mode Constant intensity: 1000-1200mw/cm for most treatment scenarios like teeth filling, restoration etc.
Time setting: 5s, 10s. 15s, 20s
2.Broad-spectrum curing most materials
Most of the resins on the market use CQ as the photoinitiator, but some resins use two new types of photoinitiators, dipheny phosphorus oxide or Ivocerin, cnd the new materials containing TPO have a light bsorption peak of 405nm. If you use an crdinary narrow-spectrum light curing machine (wavelength range: 420nm-480nm), the resin is prane to incomplete curing. And we know that incomplete composite curing often leads to secondary pulpitis, apical inflammation, and tooth hypersensitivity.
MaxCure 9 broad-spectrum light curing, newly added the 385-420nm band, the wavelength range is 385nm-515nm. It can better cure resin materials containing TPO and other emerging photoinitiators, and is suitable for ideal curing of all resin materials on the market.
After a full upgrade, MaxCure 9 changes from a single blue light to a blue-violet light, which can truly cure all light-curing materials.
3.Super large battery capacity
2600mAh lithiurn battery- International CB certification
MaxCure9 Battery capocity is 85% higher than normal Curing Lights
4.Constant Current Driver
Constant light intensity. Constant light intensity output, stabilizing the working power
5.Light guide automatic detection
The main unit will detect the light guide and stop the "Er" flashing if the guide is connected well, or the main unit will close down after 10s flashing.
Well-installed during the period of the error alarm will stop the error alarm and the lamp will light up instantly when the lamp holder is installed.
6.Overheating protection
Main unit will detect the temperature. The overheating protection program will run when the curing light reaches a certain temperature after long time use. It' Il keep flashing until 200s later that it recovers from high-temperature.
7.Battery performance detection
When detect an inconstant power output from battery, the main unit will stop working to warn with flashing "Er".
8.Overvoltage protection
With overvoltage adapter, MaxCure 9 is under protection and can' t be charged. The original adapter is recommended.
Technical Specification:
Humidity 10%-93%
Atmosphere pressure 70kPa-106kPa
Temperature -20°C - + 40°C
Light power more than 2000mw/cm².
3 Distinct Modes: Strong, Flashing, Gradually strong.
2600 mAh Large-capacity lithium battery.
5W Big power LED.
Full charging available use more than 200 times.
Automatic Standby/Automatic shutdown.
CHARGING INDICATION:
The light is on when the machine is in charging mode.
Packaging:
1 x Light Cure Unit
1 x Adapter
1 x Charging Station
100 x Disposable PE isolation sleeves
1 x Instructions Manual
***********************************************************************************************************************************************************************
LY B200-B: (5S Curing Light)
Cure Light covered by ABS painting
5W big power LED Cure Light
High articulation optical fiber
Cure Lamp Working models:strong
Automatic standby and shut down
Low Battery alert
Large-capacity lithium battery
Wireless curing lamp Solidify all brands of resin materials
Technology data:
Capacity of battery:2200mA/h3.7v
Working voltage : AC100-240V 50-60Hz
Wavelength: 420-480 nm
Light power: more than 1500mw/cm2
Solidification time and depth: 5s/3mm
***********************************************************************************************************************************************************************
Woodpecker O-Light Style
Curing Light Is a High Tech dental equipment and has a perfect quality assurance system.
- Time Setting: High - 1Sec, 3Sec; Normal - 5 Sec,10Sec,15Sec, 20Sec.
- Constant light intensity : The Solidification effect is not affected by the consumption of remaining power.
- Large Capacity battery : A full charge can be used for more than 400 times continuously under 10s working time mode.
Direction To Use:
- STEP 1:Switch on the LED Light Cure Unit with "Power Button".
- STEP 2:Press the mode button to set the working mode, the corresponding indicator will on when a mode set.
- Select the appropriate Time/Mode & start using the LED Light for curing
Technical Specifications:
- Adapter Input：AC 110V , 50Hz/60Hz, Output： DC 5V1A
- Light Source: High power Blue Light 5W
- Wavelength： 420nm~490nm
- Size: 268.8mm*26.1 mm*31.8mm
- Intensity High: 2300~2500 mw/cm2
- Intensity Normal:1000~1200 mw/cm2
- Net Weight :259g
- Battery Model: ICR 18490
Packing List:
- 1 Main unit of the LED
- 1 Light hood
- 1 Adapter
- 1 Bathymeter
- 1 Pedestal charger
- 1 Disposable sleeve
- 1 Instruction manual
- 5 Transparent cover
***********************************************************************************************************************************************************************
Curing Light-Blue
Curing Light-Silver
Curing Light-Black
Curing Light-Red
