SANSUI SR 3030 Turntable 2 Speed Belt Drive Hi Fi Vintage 1973 Work Good Look
Working Perfect on 110/120 volts or 220/240 volts with INTERNAL transformer (At the request of the buyer)
The Sansui SR-3030 is a classic high-quality turntable manufactured during the 1970s, specifically around 1973, a period when Sansui excelled in precision audio equipment.
Technical Specifications:
• Type: Manual belt-drive turntable.
• Motor: Low-noise synchronous motor.
• Tonearm: Static balance tonearm with adjustable counterweight and anti-skating.
• Speeds: 33 1/3 and 45 RPM.
• Platter: High-inertia aluminum alloy platter with damping coating to reduce vibrations.
• Wow and Flutter: Less than 0.08% (WRMS).
• Signal-to-Noise Ratio: Over 50 dB.
• Cartridge: Equipped with a standard MM cartridge and stylus but compatible with upgradeable cartridges.
Dimensions and Weight:
• Dimensions: 465 mm (width) x 355 mm (depth) x 180 mm (height).
• Weight: Approximately 9 kg.
Additional Features:
• Base: Wooden base with an elegant finish.
• Cover: Detachable acrylic dust cover.
• Stability: Robust design to minimize external vibrations.
This model is highly regarded by vintage audio enthusiasts for its solid construction, elegant design, and excellent sound quality.
Sansui SR-3030
2-Speed Belt-Drive Turntable
Description
By whatever standard you care to judge it, tone quality, precision performance or functional styling - the Sansui SR-3030 BC is one of those rare components that merits serious consideration by anyone who values traditional craftsmanship and uncompromising engineering.
It combines a large 12" platter, a newly designed hysteresis motor and Sansui's exclusive direct belt-drive system for steady, unwavering speeds at 33 and 45rpm, without rumble or noise.
Better tracking and pickup characteristics are assured by it's non-resonant, statically-balanced tubular tonearm with induced magnet cartridge.
The tonearm is complete with sliding weights, a direct reading stylus pressure scale and an inside force canceller, a special balancing weight mechanism that guarantees optimum stereo pickup, reduced record wear and longer stylus life.
Other features that make the SR-3030BC one of the world's truly great turntables are it's built in hydraulic cueing device, die-cast motor board and oil-finished walnut cabinetry.
The Sansui SR-3030-BC is an exceptional stereo component which carefully reflects the world's highest standards of audio engineering.
Specifications
Platter: 310mm die-cast aluminium alloy
Motor: 4-pole hysteresis synchronous
Speeds: 33 and 45rpm
Signal to noise ratio: better than 45dB
Wow and flutter: less than 0.09%
Tonearm: static balanced type tubular arm
Tracking error: less than +-1 degree
Stylus pressure: 0 to 2.5g
Cartridge: induced magnet type
Frequency response: 15-20,000Hz
Output balance: less than 1.5dB
Channel separation: better than 30dB
Output: 5mV
Load resistance: 50k ohms
Stylus pressure: 1.5 to 2g
Stylus: 0.5 mil spherical diamond
Weight: 18.7 lbs
With small marks of use and the passage of time, Look carefully at the photos that show the real state of the article, We do not accept subsequent claims.