****PLEASE READ- ALL ENGINES ARE CUSTOM BUILT TO ORDER TO YOUR SPECS- NONE ARE PRE BUILT AS WE DO NOT KNOW WHAT YOU WANT/OR APPLICATION/DRIVING HABITS/OR INTENDED USAGE.  WE WOULD BE HAPPY TO BUILD YOU ONE BUT WOULD NEED TO KNOW MORE ABOUT YOUR NEEDS AND THE CAR/TRANSMISSION/GEAR RATIO...WE ALSO OFFER SHIPPING TO A BUSINESS WITH ONLY A flat rate shipping and CRATING FEE.****

*****Serpentine setup shown in the last photo is at additional cost****

Now for your consideration we have mopar 416 six pack crate engine builds for your mopar musclecar, truck or street rod.  These are built on quality 340 castings that have been cleaned, inspected, pressure tested.   All blocks are checked for any damage, and then bored with appropriate torque plate,  Crank saddle checked and line bored if necessary. All blocks are square decked . Then after thorough washing block is painted customer requested color, new cam bearings installed, new freeze plugs and screw in pipe plugs installed

*Block is assembled with all new Clevite or King bearings and crank goes in for initial fitting

*After trial fit passes , crank is installed with new Fel pro rear main seal & ARP main bolts

*All new Scat rods and Icon pistons with valve reliefs for hi lift cam and advertised 10-1 comp w/ full floating pins &  spirolox

*Each rod and piston is trial fitted to ensure perfect fit

*New Hastings Moly ring set- bring Gap set for naturally aspirated operation.

*all new Clevite or King bearings for connecting rods with ARP with cap screws

*new stroker windage tray and hardware- not shown

*all new HV72 Melling pump and new pick up appropriately picked for matching pan

*all new oil pan and Fel Pro gasket /seal set, high capacity oil pan

*Kevco 6qt race/street pan with scraper and trap doors

*Comp XE-20-227-4 275/287 dur. and .525 lift - choppy idle but enough vacuum for power brakes(other cams including hydraulic roller available)

*Cloyes tru roller timing set and new cam bolt and washer

*chrome fuel pump block off, unless mechanical fuel pump

*reconditioned timing cover

*new HP SFI balancer for internal balance (this kit now makes the engine internal balance for 72 and 73 blocks)

*Trick flow 190 heads are installed on the engine shown and at this price point shown

* trick flow heads will have their cylinder head bolt kit

*new roller rocker arms set for hydraulic cam- adjustable 1.5 comp cams , pqx, or similar

*Fel Pro Head gaskets

*Comp or trend Chromoly push rods

*Edelbrock six pack intake

*new Holley promax six pack modified carburetors with metering blocks and hi flow Promax fuel line

*all new grade 8 hardware

*new billet distributor

*chrome distributor hold down

*new water pump hd 5/8" shaft

*8mm spiral core wires in blue/black/red

*NGK FR4 plugs

*engine tested on our PRW top of the line run module, double checked for integrity

**options include to add:

*solid cam 399

*Howards hyd or solid roller cam- includes short seat Morel lifters for less angularity and short pushrods- including set up- 1995

*different intakes/carbs

and more....these are just some examples - contact for options

12mo 12k warranty on parts and materials under normal circumstances

This is a stock photo and engine will be built to your specs

All engines are pre run on our Top of the line PRW engine module

Turnaround time is about four to five months, depending on how busy we are, and we don't have a core charge.   All orders are sent LTL freight to a business with an average fee of $495 for shipping/ crating

 and much more.....if interested please contact us and we can discuss your build. Payment is thru ebay checkout via MC Visa or Discover merchant card.   41 years in the MOPAR business building FAST cars......  Thank you!