Description:
Material: Brass
Drive power: AC220V DC12V DC24V
Working principle: gearbox transmission, 8 Nm, copper gear linkage synchronous motor
Motor category: synchronous motor
Allowable working pressure: <0.4MPA
Valve pressure: 0.6Mpa
Medium temperature: -5-80°C
Connection method: -5-80°C
Medium: cold/hot water
Control mode: switch type
Drive mode: electric
Structural form: straight-through
1/2" pipe outer diameter 20mm for DN15
3/4" pipe outer diameter 25mm uses DN20
1" pipe outer diameter 32mm uses DN25
11/4" pipe outer diameter 40mm uses DN32
11/2" pipe outer diameter 50mm uses DN40
2" pipe outer diameter 63-65mm uses DN50
Buyer's shopping instructions
1. This product is not suitable for use in cars. There is no warranty when used in cars. Please do not take pictures!
(Reason: Not waterproof, not earthquake-resistant, and the voltage on the car is unstable)
2. This product is not recommended to be installed in outdoor humid environments, and there is no warranty if water enters; if necessary
For outdoor use, please contact customer service for waterproof models.
3. DC12V or DC24V voltage requires an additional adapter and cannot be used directly
Directly connected to household electricity.
4. The motor actuator lead length is 30 cm.
5. The electric ball valve takes 6-15 seconds to open and close, and is not suitable for rapid opening and closing.
6. Normally closed means it opens when the power is on and closes when the power is off; Normally open means it closes when the power is on and opens when the power is off.
7. Allowable operating pressure ≤ 0,7MPa (7KG) closing pressure difference ≤ 0.4MPa (4KG)
8. When the ambient temperature is below zero and the pipe is not in use, the pipe water must be drained in advance.
Drain it to avoid freezing. After freezing, it will easily expand and the valve will crack.
Drive power: AC220V DC12V DC24V
Working principle: gearbox transmission, 8 Nm, copper gear linkage synchronous motor
Motor category: synchronous motor
Allowable working pressure: <0.4MPA
Valve pressure: 0.6Mpa
Medium temperature: -5-80°C
Connection method: -5-80°C
Medium: cold/hot water
Control mode: switch type
Drive mode: electric
Structural form: straight-through
1/2" pipe outer diameter 20mm for DN15
3/4" pipe outer diameter 25mm uses DN20
1" pipe outer diameter 32mm uses DN25
11/4" pipe outer diameter 40mm uses DN32
11/2" pipe outer diameter 50mm uses DN40
2" pipe outer diameter 63-65mm uses DN50
Buyer's shopping instructions
1. This product is not suitable for use in cars. There is no warranty when used in cars. Please do not take pictures!
(Reason: Not waterproof, not earthquake-resistant, and the voltage on the car is unstable)
2. This product is not recommended to be installed in outdoor humid environments, and there is no warranty if water enters; if necessary
For outdoor use, please contact customer service for waterproof models.
3. DC12V or DC24V voltage requires an additional adapter and cannot be used directly
Directly connected to household electricity.
4. The motor actuator lead length is 30 cm.
5. The electric ball valve takes 6-15 seconds to open and close, and is not suitable for rapid opening and closing.
6. Normally closed means it opens when the power is on and closes when the power is off; Normally open means it closes when the power is on and opens when the power is off.
7. Allowable operating pressure ≤ 0,7MPa (7KG) closing pressure difference ≤ 0.4MPa (4KG)
8. When the ambient temperature is below zero and the pipe is not in use, the pipe water must be drained in advance.
Drain it to avoid freezing. After freezing, it will easily expand and the valve will crack.
Package include:According to your choice.
