|
|
||||||
|
|
|
|
|||
*Compatibility Chart
1, You can distinguish specific model of an automobile by VIN(Vehicle Identification Number).
2, VIN(Vehicle Identification Number) consists of total 17 English letters and arabic digits.
3, VIN does not include the letters I (i), O (o), and Q (q) (to avoid confusion with numerals 1 and 0).
Land Rover Range Rover L405 2013-2023
*Generation & Evolution:
Range Rover
Classic First generation (1970-1996)
P38A Second generation (1994-2002)
L322 Third generation (2002-2012)
L405 Fourth generation (2013-present)
*Removal Guideline:
1. Raise vehicle.
2. Remove applicable rear wheel.
3. Deflate air spring on applicable side per manufacturer’s specifications.
4. Remove rear cargo area trim to access upper shock mounting nuts. (FIGURE 1)
5. Disconnect electrical connection. (FIGURE 2)
6. Remove the three (3) top nuts from upper shock mount. (FIGURE 3)
7. Remove the lower shock mount bolt. (FIGURE 4)
8. Remove the shock from vehicle. (FIGURE 5)
9. Removal complete.
*Installation Guideline:
1. Install the shock and lower shock bottom nut and bolt and tighten to manufacturer’s specifications.
(FIGURES 6, 7)
2. Install the three (3) top mount nuts and tighten to manufacturer’s specifications. (FIGURE 8)
3. Install the electrical connection. (FIGURE 9)
4. Reassemble the rear cargo area trim.
5. Inflate applicable air spring(s) per manufacturer’s specifications.
6. Reinstall applicable rear wheel.
7. Lower vehicle.
8. Installation complete.
*Warning & Notice:
Vent all air pressure from the air suspension system prior to disconnecting or removing any air suspension components. It is dangerous to remove air suspension components while under pressure. Failure to follow this instruction may result in serious personal injury.
Any air spring which is unfolded must be refolded prior to being installed in a vehicle. Refer to the procedure. An incorrectly folded air spring could rupture, altering the handling characteristics of the vehicle. If a vehicle has been driven with an incorrectly folded air spring, a new air spring must be installed. Failure to follow these instructions may result in serious injury to vehicle occupant(s).
Failure to observe the following instructions may result in a sudden failure of the air spring or suspension system.
Any rear spring which is unfolded must be refolded prior to being installed in a vehicle.
The air spring refolding procedure should only be used for an air spring which has never supported the vehicle's weight while in the incorrectly folded position.
Incorrectly folded air springs found on vehicles during pre-delivery inspection or after use must be installed new.
Do not attempt to inflate any air spring which has been collapsed while uninflated from the rebound hanging position to the jounce stop.
When installing a new air spring, care must be taken not to apply a load to the suspension until springs have been inflated using the air spring fill procedure.
After inflating an air spring in the hanging position, it must be inspected for correct shape.
1.NOTE: The vehicle must be positioned on a suitable lifting device prior to deflating the air suspension system.
With the vehicle in NEUTRAL, position on a hoist until the wheel and tire assemblies are slightly above the ground.
2.Using the scan tool, vent the air springs.
3.Remove the air spring retainer.
4.Detach the air spring from the rear axle.
5.Remove the air spring in the following sequence.
1.Disconnect the air spring solenoid electrical connector.
2.Compress the quick connect locking ring and pull out the air tube.
3.Remove the air spring.
*OEM Part Number:
LR034265 LR034266 LR034270 LR034271 LR100673
LR100687 LR098795 LR098788 LR098792 LR111854
LR072352
*Item Specifications:
- Key Words: Rear Pair Air Active Suspension Electric Shock Absorbers For Land Rover Range Rover L405 2012-2020
- Package Includes: pair for Rear Left and Right Air Suspension Shock Strut
Notes: Please double confirm the compatibility as well as the OEM number before purchasing.
Instruction is not included. Professional installation is recommended.
*Compatibility Chart
1, You can distinguish specific model of an automobile by VIN(Vehicle Identification Number).
2, VIN(Vehicle Identification Number) consists of total 17 English letters and arabic digits.
3, VIN does not include the letters I (i), O (o), and Q (q) (to avoid confusion with numerals 1 and 0).
Land Rover Range Rover L405 2013-2023
*Generation & Evolution:
Range Rover
Classic First generation (1970-1996)
P38A Second generation (1994-2002)
L322 Third generation (2002-2012)
L405 Fourth generation (2013-present)
*Removal Guideline:
1. Raise vehicle.
2. Remove applicable rear wheel.
3. Deflate air spring on applicable side per manufacturer’s specifications.
4. Remove rear cargo area trim to access upper shock mounting nuts. (FIGURE 1)
5. Disconnect electrical connection. (FIGURE 2)
6. Remove the three (3) top nuts from upper shock mount. (FIGURE 3)
7. Remove the lower shock mount bolt. (FIGURE 4)
8. Remove the shock from vehicle. (FIGURE 5)
9. Removal complete.
*Installation Guideline:
1. Install the shock and lower shock bottom nut and bolt and tighten to manufacturer’s specifications.
(FIGURES 6, 7)
2. Install the three (3) top mount nuts and tighten to manufacturer’s specifications. (FIGURE 8)
3. Install the electrical connection. (FIGURE 9)
4. Reassemble the rear cargo area trim.
5. Inflate applicable air spring(s) per manufacturer’s specifications.
6. Reinstall applicable rear wheel.
7. Lower vehicle.
8. Installation complete.
*Warning & Notice:
Vent all air pressure from the air suspension system prior to disconnecting or removing any air suspension components. It is dangerous to remove air suspension components while under pressure. Failure to follow this instruction may result in serious personal injury.
Any air spring which is unfolded must be refolded prior to being installed in a vehicle. Refer to the procedure. An incorrectly folded air spring could rupture, altering the handling characteristics of the vehicle. If a vehicle has been driven with an incorrectly folded air spring, a new air spring must be installed. Failure to follow these instructions may result in serious injury to vehicle occupant(s).
Failure to observe the following instructions may result in a sudden failure of the air spring or suspension system.
Any rear spring which is unfolded must be refolded prior to being installed in a vehicle.
The air spring refolding procedure should only be used for an air spring which has never supported the vehicle's weight while in the incorrectly folded position.
Incorrectly folded air springs found on vehicles during pre-delivery inspection or after use must be installed new.
Do not attempt to inflate any air spring which has been collapsed while uninflated from the rebound hanging position to the jounce stop.
When installing a new air spring, care must be taken not to apply a load to the suspension until springs have been inflated using the air spring fill procedure.
After inflating an air spring in the hanging position, it must be inspected for correct shape.
1.NOTE: The vehicle must be positioned on a suitable lifting device prior to deflating the air suspension system.
With the vehicle in NEUTRAL, position on a hoist until the wheel and tire assemblies are slightly above the ground.
2.Using the scan tool, vent the air springs.
3.Remove the air spring retainer.
4.Detach the air spring from the rear axle.
5.Remove the air spring in the following sequence.
1.Disconnect the air spring solenoid electrical connector.
2.Compress the quick connect locking ring and pull out the air tube.
3.Remove the air spring.
*OEM Part Number:
LR034265 LR034266 LR034270 LR034271 LR100673
LR100687 LR098795 LR098788 LR098792 LR111854
LR072352
*Item Specifications:
- Key Words: Rear Pair Air Active Suspension Electric Shock Absorbers For Land Rover Range Rover L405 2012-2020
- Package Includes: pair for Rear Left and Right Air Suspension Shock Strut
Notes: Please double confirm the compatibility as well as the OEM number before purchasing.
Instruction is not included. Professional installation is recommended.
| Item Specifics | |
|---|---|
| Brand | Scitoo |
| Placement on Vehicle | Rear Left Right |
| Manufacturer Warranty | 1 Years |
| Fitment Type | Direct Replacement |
| Quantity | 2 pcs |
| Fitment | Land Rover Range Rover L405 2013-2020 |
| Interchange Part Number | LR101595 LR104751 22277032 CPLA-5580-AB DPLA-5580-AD |
| Type | Air Suspension Struts |
| Platform | L405 |
| Items Included | Coil Spring |
| Features | 100% Accuracy of Fit Adjustable Easy to Replace Gas Charged Shock |
| Shock Absorber Type | Gas |
| Shock Absorber System | Double Pipe |
| Superseded Part Number | LR034265 LR034266 LR034270 LR034271 LR100673 LR100687 LR098795 LR098788 LR098792 LR111854 |
| OE/OEM Part Number | LR034265 LR034266 LR034270 LR034271 LR100673 LR100687 LR098795 LR098788 LR098792 LR111854 |
| Manufacturer Part Number | CB845289S01 |
| Includes | Electronic Rear Shock Absorbers |
| Adjustable | yes |
| Non-Domestic Product | No |
| OE Spec or Performance/Custom | OE Spec |
| Custom Bundle | No |
| Modified Item | No |
| Gas Charged Shock | Yes |
| Return Policy | 30 Days Free Return Or Exchange |
| Handling Time | 1 days |
| Surface Finish | Rust Protected |
| Applicable Regions | Airmatic Suspension |
| Metal Fitting Connection Design | Standard Hose Thread |
| Kit or Single Part | kit |
| Quantity Sold | Sold individually Or Wholesale |
| Recommended Use | Other |
| Quantity Sold | Sold individually Or Wholesale |
| Recommended Use | Other |
| Recommended Use | Other |
1. Order Processing
Orders are processed within 2 business days of payment confirmation. Please ensure your shipping and payment information is correct before completing checkout. Once payment is confirmed, we are unable to make any changes to your order.
2. Domestic Shipping (US)
All domestic orders are shipped from our US warehouse via USPS, UPS, or FedEx. Delivery typically takes 2–7 business days depending on your location and the shipping method selected.
3. Local Pickup
Local pickup is not available at this time.
4. International Buyers – Please Note
a. Import duties, taxes, and customs charges are not included in the item price or shipping cost. These charges are the buyer's responsibility.
b. Please check with your country's customs office to determine any additional costs before bidding or purchasing.
We accept multiple payment methods.
Payment is due within 7 days of the auction closing. If you are purchasing multiple items, please wait for a combined invoice before paying.
If payment is not received within 7 days, an Unpaid Item Case will be opened with eBay, which may result in a strike against your account.
We offer a 60-day return or exchange guarantee on all brand-new items. Items must be returned in original, unused condition. Buyer pays return shipping unless the item is defective or damaged. Refunds are processed within 2 business days of receipt.
Q: When will my item ship?
A: Orders are processed and shipped within 2 business days of payment confirmation.
Q: Where can I find my tracking number?
A: You can find your tracking number in two ways:
Log in to your eBay account, go to "My eBay" → "Purchase History", and select the order. Check your email for the shipping confirmation notification sent by eBay.
Q: How do I return an item?
A: We accept returns within 60 days of delivery. To initiate a return, please contact our customer service first. Items must be returned in original, unused condition with all packaging and accessories. A full refund will be issued to your original payment method after we receive and inspect the returned item.
We leave positive feedback upon receipt of payment. If you have any issues, please contact us before leaving feedback — we will resolve any problems to your satisfaction. If you are happy with your purchase, please take a moment to leave us positive feedback. Thank you!
Shop Category New List Item
Hot Item
Warranty
|
2x Rear RH & LH Shock Absorbers VDC For Land Rover Range Rover IV L405 LR101595
*Compatibility Chart 1, You can distinguish specific model of an automobile by VIN(Vehicle Identification Number). 2, VIN(Vehicle Identification Number) consists of total 17 English letters and arabic digits. 3, VIN does not include the letters I (i), O (o), and Q (q) (to avoid confusion with numerals 1 and 0).
Land Rover Range Rover L405 2013-2023
*Generation & Evolution: Range Rover
*Removal Guideline: 1. Raise vehicle. 2. Remove applicable rear wheel. 3. Deflate air spring on applicable side per manufacturer’s specifications. 4. Remove rear cargo area trim to access upper shock mounting nuts. (FIGURE 1)
5. Disconnect electrical connection. (FIGURE 2)
6. Remove the three (3) top nuts from upper shock mount. (FIGURE 3)
7. Remove the lower shock mount bolt. (FIGURE 4)
8. Remove the shock from vehicle. (FIGURE 5)
9. Removal complete.
*Installation Guideline: 1. Install the shock and lower shock bottom nut and bolt and tighten to manufacturer’s specifications. (FIGURES 6, 7)
2. Install the three (3) top mount nuts and tighten to manufacturer’s specifications. (FIGURE 8)
3. Install the electrical connection. (FIGURE 9)
4. Reassemble the rear cargo area trim. 5. Inflate applicable air spring(s) per manufacturer’s specifications. 6. Reinstall applicable rear wheel. 7. Lower vehicle. 8. Installation complete.
*Warning & Notice:
*OEM Part Number: LR034265 LR034266 LR034270 LR034271 LR100673
*Item Specifications:
Notes: Please double confirm the compatibility as well as the OEM number before purchasing. Shipping
1. Order Processing 2. Domestic Shipping (US) 3. Local Pickup 4. International Buyers – Please Note Payment
We accept multiple payment methods. Payment is due within 7 days of the auction closing. If you are purchasing multiple items, please wait for a combined invoice before paying. If payment is not received within 7 days, an Unpaid Item Case will be opened with eBay, which may result in a strike against your account. Returns
We offer a 60-day return or exchange guarantee on all brand-new items. Items must be returned in original, unused condition. Buyer pays return shipping unless the item is defective or damaged. Refunds are processed within 2 business days of receipt. Customer Services
Q: When will my item ship? A: Orders are processed and shipped within 2 business days of payment confirmation. Q: Where can I find my tracking number? A: You can find your tracking number in two ways: Log in to your eBay account, go to "My eBay" → "Purchase History", and select the order. Check your email for the shipping confirmation notification sent by eBay. Q: How do I return an item? A: We accept returns within 60 days of delivery. To initiate a return, please contact our customer service first. Items must be returned in original, unused condition with all packaging and accessories. A full refund will be issued to your original payment method after we receive and inspect the returned item. Feedback
We leave positive feedback upon receipt of payment. If you have any issues, please contact us before leaving feedback — we will resolve any problems to your satisfaction. If you are happy with your purchase, please take a moment to leave us positive feedback. Thank you! Copyright of SCITOO-AutoParts . All rights reserved. |
