Martin Walter Powersonic Ultrasonic Generator (with 2 cards) and 6 immersion transducers.
Includes Free Shipping.
- 2CI-10.5X14-9-FC 0108-T-0006
- 132CI-10.5X14-9-FC 0108-T-0007
Small Immersion Transducer Information:
- 4CI-78-3-FC 0596-T-0534
- 4CI-78-3-FC 0596-T-0533
- 4CI-78-3-FC 0596-T-0532
- 4CI-78-3-FC 0695-T-0459
Generator uses input voltage of 240 VAC.
Power cord currently has 2 horizontal blades and the ground pin (see pic).
The generator powers up and appears to function properly.
I attached each of the transducers and they all produced a noticeable 'buzzing vibration'.
The large transducers have 2 input cables (one black and one gray). I was told that the black cable attaches to port 1 on the generator, and the gray cable attaches to port 2. This is the configuration that I used to test the units and everything seemed to function properly.
Detailed Notes for Full Disclosure:
- There is one missing screw on the outer housing of the generator. There are still 3 screws remaining to hold the top on, so this isn't critical. Easily replaced, but I thought that I would point it out.
- One of the power junction boxes for one of the transducers has corrosion to the external paint, but the box integrity is still sound.
- A small area on the generator housing (on the rear lower corner) has the paint scraped away is is mildly crimped. This is where the previous owner was attaching an extra external ground with an alligator clip.
- Three of the smaller units have protective foam taped to their top surfaces. This was for protection while in storage. I have left it on to offer protection during shipping.
- The outer insulation is cracked/broken on a couple of the BNC cables at the point where the cable goes into the junction box. This is obviously just from the wires being moved around over time. Easily fixed by simply pulling the cables slightly into the junction box.
- One BNC cable had one small crack/split in the outer insulation. I put some green electrical tape over it for protection. The braided wire underneath the insulation is perfectly intact.
Includes Free Shipping.
This is a large heavy lot, so I will be shipping it in many separate packages.
Due to the very high cost/difficulty of packing/shipping this lot, I am not offering my usual 30 day return policy for these items.