Product Features
Features:
* This instrument has four interfaces: single point measurement, scanning, information, correction and calibration
* By default, the enters the single-point measurement interface upon startup.
* Aluminum alloy shell to extend service life.
* Note: For user convenience, each calibration correction option will automatically change to user calibration. At the same time, in order to ensure the integrity of the calibration, during the calibration process, there is an automatic shutdown function when a fault occurs, and the power is always turned on.
Startup and shutdown:
* Hold down the CTRL key without pressing the power switch button.
* When the power is on, press and hold (more than 2S) the switch button. After releasing it, the instrument will shut down.
* When the power is on, press and hold (more than 2S) the switch button. After releasing it, the instrument will shut down.
Recommendations for use:
* In order to ensure the accuracy of measurement and calibration, the instrument must be warmed up for at least 15 minutes.
* Try to use high-quality RF cables and connectors.
* Those marked with calibration cables can be used directly without calibration.
* The test cable process affects the measurement accuracy. It is recommended not to choose a test cable that is too long when possible.
* Before measuring and calibrating, please make sure you are not in a strong wireless signal to avoid interference and inaccurate measurements.
* If you don’t understand the impedance measurement itself, you can refer to the instructions and tutorials of the vector network analyzer. This instrument is equivalent to a single-port vector network analyzer.
Specification:
Model: PS100
Working frequency: 137.5MHz~2700MHz
Step frequency: 1kHz
Display: 2.4-inch TFT, resolution 320*240 (QVGA)
Power consumption<1.5W
Charging current: 400mA
Charging port: USB
Automatic shutdown: can be set for 5-60 minutes
Measured parameters: impedance, reactance, SWR and S11
Resolution: 4 digit reading
Frequency accuracy: <±10ppm
Connector: SMA-K
Impedance measurement range:
1Ω~1000Ω@frequency<1300MHz;
1Ω~300Ω @frequency>1300MHz (absolute value of impedance)
Standing wave measurement range:
1~65@frequency<1300MHz;
1~10@frequency>1300MHz
S11(dB) measurement range: 0dB to -50dB
Error (single point measurement):
For impedance: For standing waves: < effective reading x 10%±0.1
For S11: 0.1dB/5° (0dB to -10dB)
For (dB/°): 1dB/10° (-10dB to -20dB); 5dB/20° (-20dB to -40dB)
Directivity: < 35dB (140MHz to 2GHz after calibration); < 30dB (2GHz to 2.7GHz)
Scan points: 280
Output level: -18dBm
Working temperature: 0℃ to 40℃
Atmospheric pressure: 860hPa~1060hPa
●Shipping
We ship orders in 1-5 days after payment.
- Economy: 15-60 days
- Standard: 10-35 days
- Expedited: 4-7 days
If out of delivery times, have not received the package, please contact us and we will solve the problem ASAP
◇Import Duties
Customs duty is obligation and liability of a citizen in your country, so buyer should be responsible for any tax and custom duty incurred. For example, Laser Pointer is unacceptable in some countries. Therefore, please double check your local customs policy carefully before purchase. Or, we will NOT be responsible for any failure delivery related destination customs issue.
Reminder :
Our price does not include any customs tax/fee at the destination. You need to pay some tax/fee or not when the goods get Clearance Customs in the destination Customs; it depends on the laws in the destination country.
In some countries, sales tax is collected by eBay.
Please make sure your shipping information ( including address/post code/phone number/contact person ) is correct before ordering. If you want us to send it to another address, please inform us in advance and leave a message in our transaction.
★ Feedback
We Strive for 100% Customer Satisfaction and we love to leave positive feedback to our buyers.
If you are satisfied with our service, sincerely hope you will leave us a positive feedback with all 5 stars DSR.
If there are any problems with our product or service, please do contact us before leaving a neutral or negative feedback. We are willing to offer any help and believe problem will be solved positively.
Your recognition will encourage us greatly and serve you better