Ghost RC GOS060-0116-00 V2 1408 4-Pole No Prep Drag 7000kV Adjustable Endbell Sensored Brushless Motor

The Ghost RC V2 1408 4-Pole No Prep Drag Sensored Brushless Motor (7000kV) (Adjustable Endbell) represents the pinnacle of engineering excellence in the world of 1/10 No Prep Drag racing. Specially designed for this high-octane racing category, this motor combines raw power with precision engineering to deliver an unparalleled racing experience. Its powerful 4-pole design ensures maximum torque and efficiency, providing an explosive launch off the line. This motor's core strength lies in its high-quality construction featuring a stainless-steel rotor sleeve and high-performance bearings, which together enable higher gearing and support a jaw-dropping 90,000 RPM limit. These features ensure that the motor not only reaches incredible speeds but also maintains consistent performance under extreme conditions, making it a formidable choice for serious racers aiming for the podium. Moreover, the V2 Ghost RC 1408 motor is equipped with an adjustable end-bell, allowing you to maximize the potential of your 7000kv motor by fine tuning the motor timing. Racing-grade neodymium magnets and an ultra-durable stainless steel shaft ensure that it can withstand the rigors of competitive racing while delivering peak performance. The 8AWG silicone wires enhance electrical conductivity, ensuring that every bit of power from your battery is efficiently transferred to the motor. This meticulous attention to detail and quality allows the motor to deliver all the power needed to rocket out of the sticky prep at the start and maintain a commanding lead across the finish line. Built-in collaboration with Castle Creations, the 1408-7000kV motor leverages thousands of hours of development experience from the groundbreaking 1412-6400kV motor, pushing the boundaries of what is possible in 2S no prep drag racing. This makes the Ghost RC 1408 not just a motor, but a game-changer, ready to redefine your racing experience and dominate the competition. NOTE: Always run your motor within the manufacturer’s specs Not intended for operation while submerged in liquid Sensor wire must be used to utilize the motor capabilities Features: Specially designed for 1/10 No Prep Drag racing Powerful 4-pole design Adjustable end-bell allows for fine-tuning the motor timing Optimized for speed with a stainless-steel rotor sleeve and high-performance bearings Enable higher gearing and a head-spinning 90,000 RPM limit Water and element proof design racing-grade neodymium magnets, stainless steel shaft and 8AWG silicone wires Delivers all the power you need to launch out of the sticky prep at the start Specifications: Application: 1/10 No Prep Drag Type: Brushless Sensored Input Voltage: 2S (7.4V) LiPo Connectors: 6.5mm Male Motor Connectors Diameter: 1.417in (36mm) Length: 2.462in (62.55mm) Mounting Holes: 3mm @25.4mm Shaft Diameter: 0.196in (5mm) Shaft Length: 0.787in (20mm) Weight: 295g (10.4oz) Includes: (1) V2 1408 4-Pole No Prep Drag Sensored Brushless Motor w/Adjustable Endbell (7000kV)

Ghost RC GOS060-0116-00 V2 1408 4-Pole No Prep Drag 7000kV Adjustable Endbell Sensored Brushless Motor

The Ghost RC V2 1408 4-Pole No Prep Drag Sensored Brushless Motor (7000kV) (Adjustable Endbell) represents the pinnacle of engineering excellence in the world of 1/10 No Prep Drag racing. Specially designed for this high-octane racing category, this motor combines raw power with precision engineering to deliver an unparalleled racing experience. Its powerful 4-pole design ensures maximum torque and efficiency, providing an explosive launch off the line. This motor's core strength lies in its high-quality construction featuring a stainless-steel rotor sleeve and high-performance bearings, which together enable higher gearing and support a jaw-dropping 90,000 RPM limit. These features ensure that the motor not only reaches incredible speeds but also maintains consistent performance under extreme conditions, making it a formidable choice for serious racers aiming for the podium.

Moreover, the V2 Ghost RC 1408 motor is equipped with an adjustable end-bell, allowing you to maximize the potential of your 7000kv motor by fine tuning the motor timing. Racing-grade neodymium magnets and an ultra-durable stainless steel shaft ensure that it can withstand the rigors of competitive racing while delivering peak performance. The 8AWG silicone wires enhance electrical conductivity, ensuring that every bit of power from your battery is efficiently transferred to the motor. This meticulous attention to detail and quality allows the motor to deliver all the power needed to rocket out of the sticky prep at the start and maintain a commanding lead across the finish line. Built-in collaboration with Castle Creations, the 1408-7000kV motor leverages thousands of hours of development experience from the groundbreaking 1412-6400kV motor, pushing the boundaries of what is possible in 2S no prep drag racing. This makes the Ghost RC 1408 not just a motor, but a game-changer, ready to redefine your racing experience and dominate the competition.

NOTE:

  • Always run your motor within the manufacturer’s specs
  • Not intended for operation while submerged in liquid
  • Sensor wire must be uséd to utilize the motor capabilities

Features:

  • Specially designed for 1/10 No Prep Drag racing
  • Powerful 4-pole design
  • Adjustable end-bell allows for fine-tuning the motor timing
  • Optimized for speed with a stainless-steel rotor sleeve and high-performance bearings
  • Enable higher gearing and a head-spinning 90,000 RPM limit
  • Water and element proof design
  • racing-grade neodymium magnets, stainless steel shaft and 8AWG silicone wires
  • Delivers all the power you need to launch out of the sticky prep at the start

Specifications:

  • Application: 1/10 No Prep Drag
  • Type: Brushless Sensored
  • Input Voltage: 2S (7.4V) LiPo
  • Connectors: 6.5mm Male Motor Connectors
  • Diameter: 1.417in (36mm)
  • Length: 2.462in (62.55mm)
  • Mounting Holes: 3mm @25.4mm
  • Shaft Diameter: 0.196in (5mm)
  • Shaft Length: 0.787in (20mm)
  • Weight: 295g (10.4oz)

Includes:

  • (1) V2 1408 4-Pole No Prep Drag Sensored Brushless Motor w/Adjustable Endbell (7000kV)
×

Buy now and save!

Shipping info

Click the Shipping & Payments tab above the listing description for more info

Click the Shipping & Payments tab above the listing description for more info!

Additional delivery notes

PICK UP OPTION

Sorry, our items are NOT available for pick-up.

PAYMENT


Immediate payment is required upon selecting "Buy It Now" or upon checking out through the cart.

We accept payment via U.S. PayPal accounts and all Major Credit Cards, Debit Cards & Google Pay.

We are legally required to collect sales tax in those states and localities where we maintain a physical presence (nexus).

The applicable amount of sales tax charged to an order will be calculated based on the shipment destination's state and local sales tax laws.

Thank you for shopping with us on eBay!

Additional Information

No additional information at this time

Ask seller a question

To contact our Customer Service Team, simply click the button here and our Customer Service team will be happy to assist.

Ask seller a question

© World of R/C Parts & Supplies

Click the Shipping & Payments tab above the listing description for more info

Accepted Payment Methods

Immediate payment is required upon selecting "Buy It Now" or upon checking out through the cart.

We accept payment via U.S. PayPal accounts and all Major Credit Cards, Debit Cards & Google Pay.

We are legally required to collect sales tax in those states and localities where we maintain a physical presence (nexus).

The applicable amount of sales tax charged to an order will be calculated based on the shipment destination's state and local sales tax laws.

Thank you for shopping with us on eBay!

Returns are accepted

Items must be returned within 30 days of the auction ending

Buyer will pay for return shipping.


Additional Information:
Returns: Buyer Pays Shipping, 30 day, no International