Premium Quality High Strength With Extended Lifespan Recliner Chair and Sofa Handle Replacement Release Cables Available Through Furniture Spares Direct! 

Brand new replacement manual recliner handle release cable only (Handle is not included). Suitable for all recliner chairs, sofas, corner & modular lounges. A cost effective way to DIY fix your recliner using our premium quality reliable OEM replacement parts. 
Quick & easy to install with no experience required, simply follow our step by step installation instructions below.

Please note that recliner release cables vary in length/size from each brand and model. So depending on what model you have and from which brand the cable details can be different so it is very important to follow our step by step guide below to removing the handle and cable, measuring the broken cable correctly and accurately to then ordering the correct length and then how to install once the new replacement cable is received.

It Is Very Important To Note The Following Information Before Ordering -
  • You must always fully remove the original handle and cable fully from the furniture to measure accurately.
  • You must follow our measuring guide to establish the correct size cable to order.
  • It's essential that the original cable is measured accurately to ensure a correct match! Not all recliners and cables are the same size.
  • All our cables are 965mm long overall which means end to end.
  • Your original cable overall measurements maybe either shorter or longer than ours of 965mm, this is not important as long as you are able to achieve the same exposed wire length as one of our cables we stock you will find it fits and works perfectly.
  • Our cables do not have springs over the exposed wire length at the hook end as the spring is not required even if you original has a spring. Cables will work just fine without springs.
  • When we mention 'exposed wire length' we are meaning the HOOK end not the Barrel end.
  • Our quoted size of the exposed wire length is always taken when laid flat fully stretched out and not attached to the mechanism or handle.
  • Our quoted cable sizes are always exposed wire lengths including the 'S' hook.
  • When we quote 92mm we are meaning the exposed wire length including the 'S' hook end is 92mm when not installed into the handle or the mechanism.
  • We stock 92mm, 97mm, 110mm, 123mm, 132mm, 140mm, 145mm and 150mm exposed wire lengths only.
  • If you can not find a match to your cable size please contact us via our eBay store for more help.
We only stock and supply 6mm diameter steel barrels however note due to manufacturing fluctuations the barrel diameter can be anywhere between 4-6mm. Any size with in this range will be compatible.      



EXAMPLE ORDER:- 

Your original cable measurements - (this is just an example and your measurements may differ to ours listed here)
  • PVC outer cable (Sheath) including the both clips 815mm
  • Inner steel wire 965mm 
  • Equals an exposed wire of 150mm

You would need to order from our store - 
  • 150mm Exposed x 965mm x 6mm 


HERE ARE THE STEP BY STEP INSTRUCTIONS TO ACHIEVING THE CORRECT SIZE CABLE

Step 1,  Removing the original handle and cable:-

Remove the recliner handle by unscrewing the fixings found behind the latch using a screw driver
Pull out the recliner handle and rotate it to expose the cable attachment and unclip the cable from the handle keeping any parts you remove safe
Next carefully turn the recliner forward and over to view the underside of the recliner 
Locate the PVC casing of the cable and pull it out and let it hang
Locate the retaining clip situated in the recliner mechanism and using a pair of long nose pliers pinch the clip to remove and finally unhook the 'S' hook end from the release lever arm and remove completely from the recliner

Step 2, Measuring the cable:-

1, Pull the inner metal wire completely out of the outer tube (Sheath) & measure the whole wire length including the hook end through to the broken end
2, Measure the outer PVC casing (Sheath) including the retaining clip and collar at each end
3, Subtract measurement 2 from 1 to give you a size that matches as near as possible to one of our cable sizes
4, Note your measurement can be +/- 4mm different to our advertised size & it will still fit
5, Place your order through our eBay page

NOTE:- If you are not 100% sure of the correct size to order please contact our support team through the eBay page before purchase, 
we are always happy to answer any questions & help with your purchase from Furniture Spares Direct.

Step 3, Order process , Receiving the Cable and Fitment:-

Once your order is placed with our store, our team we will process your order at our Queensland warehouse in accordance with the eBay guidelines and dispatched via Australia post
Once you receive the order and checked the contents begin to install the replacement cable as follows
Connect the cable into the rear of the handle by first placing the steel barrel into the hole and feed the steel wire through the groove and click the metal collar into the handle guide and if available reconnect the retaining clip over the cable collar to further secure the cable into position (Not all handles have retaining clips)
Next feed the hook end of the cable into the arm hole in the recliner directing the cable down towards the floor
Reattach the handle into the arm hole ad secure with the original screws
Carefully turn over the recliner in the forward position exposing the recliner mechanism 
Locate the hook end of the wire
Next connect the black plastic retaining clip into the available mechanism slot listing for a 'click' sound to confirm connection
Then connect the S hook into the release leaver hole (If more than one hole available on the release lever arm use the hole which provide a snug tension on the exposed wire)
Finally turn the recliner back over and test handle for correct operation.

HAPPY RECLINING AND PLEASE LEAVE US A POSITIVE REVIEW!!

Support Local, Support Our Australian Business!!
Furniture Spares Direct is a proud Australian owned and operated company based in Queensland. We employ local staff and support local services. We would appreciate your support by purchasing from our store.

International Buyers ? Please Note:
Import duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyer?s responsibility.