Aja CION Front Baseplate with mounting hardware, used, in good condition with typical signs of use and handling. Two available, pictures show typical condition.
Sold with a 60-day unconditional return policy.
Manufacturer's Description:The Front Baseplate features 15mm lightweight spacing. The 15mm lightweight
standard is used throughout the film and video industry to host accessories such as
matte boxes and follow focuses.
To attach the Front Baseplate to the CION, use the four provided 1/4-20 screws. There are four recessed holes where the 1/4-20 screws are inserted. Be sure to
align the baseplate as straight as possible so that the 15mm rods will be properly aligned
with the lens and allow easy integration with other critical tolerance accessories such as
matte boxes. A 4-40 guide pin is supplied on the base plate to help with alignment and
proper positioning of the baseplate.
Once the Front Baseplate is secured and properly aligned, you may elect to leave it in
place on the unit for future ease of use.
User-supplied 15mm rods of the desired length are inserted into the rod clamps on the
Front Baseplate; use the knobs to tighten down on the rods. Note that rods may be
passed all of the way through the baseplate, but this will be undesirable if you plan to use
the baseplate in handheld configurations. Rods passed all the way through the Front
Baseplate may be used in conjunction with the Rear Baseplate accessory.
NOTE: The height of the Front Baseplate accessory was designed so that it may be used in
conjunction with third-party baseplates or bridgeplates that use 15mm studio spacing or
19mm studio spacing