These are 'Decals' otherwise known as Waterslide transfers. In all Options the decals are sold as a pair.
They can be used on the whole range of boats. They can be cut to size or applied 'as is' on the models to replace those which have been worn, damaged or scorched, or to simply and quickly add additional decoration on engines, trailers, accessories or diorama.
Good quality, laser printed, they are easy to apply on new painted metal or on woodwork. They can be applied over the top of old decals.
They are an alternative to self adhesive examples with significant advantages:
- Cheaper.
- Can be applied over the top of old signage without the need to remove the original.
- They can be slid and re positioned more easily.
- They are thinner and do not leave an adhesive residue.
- They can be used to hide rivets or areas of paint damage.
- Less affected by heat.
- Easily replaced.
- Once in place, if lacquered or put in a warm oven for an hour, they will last longer.
These are with a white backing and unlike the clear backed variety are intended for use on dark backgrounds.
All dimensions are shown as Length x Width and refer to the printed area or in the case of the ghosted of the lettering.
In all cases they are sold as a pair.
Option 1: Bowman (Dereham) Large x 2. Round dark red and gold decals. These are 35 mm diameter.
Option 2: Bowman (Dereham) Small x 2. Round dark red and gold decals. These are 24 mm diameter.
NOTE: Options 7 & 8. Bowman (Dereham) are not the same decal as the Bowman (Luton) because these were completely different companies.
Option 3: Bowman (Luton) x 2. square blue gold and green decals measuring 33 x 33 mm.
Option 4: Bowman (Luton) x 2. square blue gold and green decals measuring 25 x 24 mm.
Option 5: Snipe Small x 2. Oblong with black lettering on red background and black surround . These measure 36 x 10 mm.
Option 6: Snipe Medium x 2. Oblong with black lettering on red background and black surround . These measure 48 x 14 mm
Option 7: Snipe Large x 2. Oblong with black lettering on red background and black surround . These each measure 56 x 19 mm.
Option 8: Snipe Medium Ghosted x 2. Slanted black lettering ghosted in mid blue with a light blue background. These each measure 30 x 5 mm.
Option 9: Snipe Large Ghosted x 2. Slanted black lettering ghosted in mid blue with a light blue background. These each measure 40 x 10 mm.
Option 10: Eagle Medium Ghosted x 2. Slanted black lettering ghosted in mid blue with a light blue background. These each measure 33 x 6 mm.
Option 11: Eagle Large Ghosted x 2. Slanted black lettering ghosted in mid blue with a light blue background. These each measure 45 x 10 mm.
Option 12: Seahawk Medium Ghosted x 2. Slanted black lettering ghosted in mid blue with a light blue background. These each measure 47 x 7 mm.
Option 13: Seahawk Large Ghosted x 2. Slanted black lettering ghosted in mid blue with a light blue background. These each measure 64 x 9 mm.
Option 14: Swallow Medium Ghosted x 2. Slanted black lettering ghosted in mid blue with a light blue background. These each measure 49 x 7 mm.
Option 15: Swallow Large Ghosted x 2. Slanted black lettering ghosted in mid blue with a light blue background. These each measure 68 x 9 mm.
Option 16: Swallow Medium Ghosted x 2. Slanted black lettering ghosted in mid blue with a light brown background. These each measure 49 x 7 mm.
Option 17: Swallow Large Ghosted x 2. Slanted black lettering ghosted in mid blue with a light brown background. These each measure 68 x 9 mm.
- Ensure there is no loose paint or rust on the area where the decal is to be applied.
- Wipe the area quickly with methylated spirit to remove grease and soot. If you linger, it will damage the paint!
- Cut off the white surround carefully around the edge of the decal very close to the design. You will need steady hands AND very sharp small scissors especially for the ones with curved edges.
- Immerse in shallow (use a plate not a bowl) clean distilled or rain water to which a couple of drops of washing up liquid have been added. Prevent curling by placing face down initially. Then turn back over and leave to soak for 1-2 minutes.
- Position on the desired point on the model. Using a clean finger or a brush slide the decal off the backing paper. If it does not move easily re-immerse and repeat.
- Ensure there are no creases and that the positioning is correct.
- Dab (do not rub) with absorbent kitchen roll to remove excess water.
Nominal, subsidised charge for postage for any number of decals plus generous Multi-buy discounts.
These are stock images and not of the exact item you will receive. Postage combined on more than one purchase. UK sales only.
Any boats, parts or other items pictured are not included in the listing and are for illustration purposes only.
OTHER DECALS AVAILABLE: Just put this number in the e bay search box.
Mamod London Bus: 335599294051
Mamod Railways: Railway decals at listing 335255104081.
Mamod: Static engine decals at listing 334340700518.
Fairground: At listing 334479190478.
DELIVERY UPGRADE.
URGENT? The delivery of ANY item or group of items bought at the same time can be upgraded to 'same day 24 hour Royal Mail Special Delivery' for a single additional payment of £5. To invoke this, please go to listing 333831804608 (put this number in the e bay search box) then buy the 'PACK 1' option for £5.