Audison SR 6.600 Amp 6 Channel High Power Bridgeable Speaker Amplifier 1120w RMS

SR 6.600 Amplifier 1120 W total power | 140 W x 4 + 185 x 2 @2ohm | D-Class SR AMPLIFIERS At Audison, our commitment to delivering unparalleled sound quality and innovation in-car audio systems remains unwavering. We are thrilled to present our latest masterpiece – the Audison SR 6.600 6-Channel Amplifier with Hi-Res Audio Certification. This amplifier is engineered to redefine your in-car listening experience, setting a new standard in audio excellence. Audison D-Class technology ADT uses a switching frequency twice as fast as many other modern Class D amplifiers using very high-tolerance component parts to keep the timing correct even during temperature extremes. The higher switching frequency of Audison Class D moves noise much farther away from the audible band. Audison Class D amplifiers also use a steeper 4th-order analog lowpass filter, rather than the simpler 2nd-order lowpass filters usually used in competing designs. The steeper filter will keep noise much lower in amplitude – which is good for controlling EMI and preventing infrasonic noise from getting to the tweeters. It also keeps phase shift outside the audible range. The cost is higher – twice as many components are needed for a 4th-order filter compared to the usual 2nd-order filter, and each output channel needs its own filter – but Audison determined through exhaustive listening testing that this design was the best-sounding approach. High-current capability delivers high power into the most difficult loads (1Ω Stereo, 2Ω Bridged, for 5/6) Staggered power optimized for a 3-way active front with higher power for woofers, or 600W of bridged power for a sub 5 ch output operation mode to create a five-channel system, with 2Ω subwoofer Flexible crossover filter networks deliver Active 3-way, Front/Rear/Sub, or six channels of high-passed power ADT (Audison D-Class) Technology 2Ω stable output providing Hi-Res certified audio performance with superior efficiency in a compact size. Extruded aluminum compact design with a fanless convection cooling system Built-in USS (Universal Speakers Simulator) Balanced high-noise rejection inputs for Speaker-In (for OEM head units) and RCA-In (for Aftermarket head units). ART (Automatic Remote Turn-On/Off) automatically turns on/off the amplifier when the OEM head-unit turns on/off (can be enabled/disabled, with Speaker-In inputs) Accepts up to 40-volt input signal (Speaker-In) Bass Boost(50 Hz) adjustable up to 12 dB, to increase the subwoofer punch Lo-Pass and Hi-Pass 12 dB adjustable (50 Hz to 5000 Hz) filters, providing the ability to build a 3-way system, a front 2-way + rear system, or a front 2-way + one powerful subwoofer (2Ω) Optional VCR-S2/ARC 01 Remote Volume Control provides the ability to adjust the OUT 5/6 volume level from the dashboard USS Universal Speaker Simulator technology on high-level inputs for maximum compatibility with any type of Head-Unit OEM Source. Hi-Res According to the definition of Hi-Res audio provided by JAS (Japan Audio Society), this amplifier exceeds the above 40 kHz bandwith analog requirement. Fully Bridgeable Maximum versatility thanks to the bridging option for each pair of channels.

CEN

Free UK Mainland Delivery

Audison SR 6.600 Amp 6 Channel High Power Bridgeable Speaker Amplifier 1120w RMS

Free UK

Mainland Delivery

Hassle Free

30 Day Returns

Trusted for More

Than a Decade

Premium Products

from Top Brands

Product Description

SR 6.600 Amplifier

1120 W total power | 140 W x 4 + 185 x 2 @2ohm | D-Class

SR AMPLIFIERS

– the Audison SR 6.600 6-Channel Amplifier with Hi-Res Audio Certification. This amplifier is engineered to redefine your in-car listening experience, setting a new standard in audio excellence.

Audison D-Class technology

ADT uses a switching frequency twice as fast as many other modern Class D amplifiers using very high-tolerance component parts to keep the timing correct even during temperature extremes. The higher switching frequency of Audison Class D moves noise much farther away from the audible band. Audison Class D amplifiers also use a steeper 4th-order analog lowpass filter, rather than the simpler 2nd-order lowpass filters usually uséd in competing designs. The steeper filter will keep noise much lower in amplitude – which is good for controlling EMI and preventing infrasonic noise from getting to the tweeters. It also keeps phase shift outside the audible range. The cost is higher – twice as many components are needed for a 4th-order filter compared to the usual 2nd-order filter, and each output channel needs its own filter – but Audison determined through exhaustive listening testing that this design was the best-sounding approach.

High-current capability delivers high power into the most difficult loads (1Ω Stereo, 2Ω Bridged, for 5/6)
Staggered power optimized for a 3-way active front with higher power for woofers, or 600W of bridged power for a sub 5 ch output operation mode to create a five-channel system, with 2Ω subwoofer
Flexible crossover filter networks deliver Active 3-way, Front/Rear/Sub, or six channels of high-passed power
ADT (Audison D-Class) Technology 2Ω stable output providing Hi-Res certified audio performance with superior efficiency in a compact size.
Extruded aluminum compact design with a fanless convection cooling system
Built-in USS (Universal Speakers Simulator)
Balanced high-noise rejection inputs for Speaker-In (for OEM head units) and RCA-In (for Aftermarket head units).
ART (Automatic Remote Turn-On/Off) automatically turns on/off the amplifier when the OEM head-unit turns on/off (can be enabled/disabled, with Speaker-In inputs)
Accepts up to 40-volt input signal (Speaker-In)
Bass Boost(50 Hz) adjustable up to 12 dB, to increase the subwoofer punch
Lo-Pass and Hi-Pass 12 dB adjustable (50 Hz to 5000 Hz) filters, providing the ability to build a 3-way system, a front 2-way + rear system, or a front 2-way + one powerful subwoofer (2Ω)
Optional VCR-S2/ARC 01 Remote Volume Control provides the ability to adjust the OUT 5/6
volume level from the dashboard

USS

Universal Speaker Simulator technology on high-level inputs for maximum compatibility with any type of Head-Unit OEM Source.

Hi-Res

According to the definition of Hi-Res audio provided by JAS (Japan Audio Society), this amplifier exceeds the above 40 kHz bandwith analog requirement.

Fully Bridgeable

Maximum versatility thanks to the bridging option for each pair of channels.

Specification

Channels 6
Class D-Class
Efficiency >87%
Hi Level Input Yes
Low Level Input Yes
Digital Input No
Power supply voltage / fuse 11 ÷ 17 VDC
Operating power supply voltage 11 ÷ 17 VDC / 2 x 30A
Idling current 2.2 A
Idling current when off 0.04 mA
Consumption @ 14.4 VDC, 2Ω, Max Musical Power 54 A
Remote OUT 4 ÷ 15 VDC (150 mA)
Remote IN 4 ÷ 15 VDC (1 mA)
ART - Automatic Remote Turn on/off from OUTPUT BTL speakers (Selectable) 1.5 ÷ 7 VDC
Distortion - THD @ 100 Hz, 4Ω, 70% Rated Power 0.05 %
Bandwidth A 10Hz ÷ 42 kHz
S/N ratio A 102 dBA
Damping factor A A Ch/B Ch 100
C Ch 400
Input sensitivity Pre-In 0.32 ÷ 8 VRMS
Pre In Impedance >10 kOhm
Input sensitivity Speaker-In 1.6 ÷ 40 VRMS
Input impedance Speaker-In 3Ohm ÷ 100kOhm (it depends by the Polyfuse specifications)
Total Power RMS 1120 W
Minimum load impedance Ch 1-4: 2Ω
Ch 5-6: 1Ω
1+2/3+4 Bridged: 4Ω
5+6 Bridged: 2Ω
Output Power (RMS) @14.4 VDC, 1% THD 6Ch mode
@4Ω: 85 x 4 + 110 x 2
@2Ω: 140 x 4 + 185 x 2
Ch1-4 @2Ω, Ch5-6 @1Ω: 140 x 4 + 300 x 2
5Ch mode
@4Ω: 85 x 4 + 370 x 1 (Ch5/6 bridged)
@2Ω: 130 x 4 + 600 x 1 (Ch5/6 bridged)
4Ch mode
@4Ω: 280 x 2 (bridged) + 110 x 2
@2Ω: 130 x 2 + 260 x 1 + 600 x 1
3Ch mode
@4Ω: 280 x 2 + 370 x 1 (Ch5/6 bridged)
280 x 2 (Ch1-4 @4Ω) + 600 x 1 (Ch5/6 bridged @2Ω)
Adjustable Crossover Yes
Output power @ 4Ω, 1% THD+N, 14.4 V 75 W x 4 Ch + 85 W x 2 Ch
SN ratio (ref. 1W output) A Ch, B Ch: 84 dBA
C Ch: 84 dBA
Input Type Pre-In / Speaker-In
Filter Pass A Full
Hi-pass: 50 ÷ 500 Hz @ 12 dB/Oct.
Filter Pass B Full
Hi-pass: 50 ÷ 500 Hz @ 12 dB/Oct
Band-pass: 50 ÷ 700 Hz (Hi) / 50 ÷ 5 kHz (Lo) @ 12 dB/Oct
Filter Pass C Full
Hi-pass: 50 ÷ 700 Hz @ 12 dB/Oct
Lo-pass: 50 ÷ 700 Hz @ 12 dB/Oct
Inputs/Outputs Sub CH -
Inputs/Outputs Phase No
Inputs/Outputs Bass Boost No
Inputs/Outputs Subsonic No
Remote Sub Volume (-20 ÷ 6) dB

What's included

Audison SR 6.600 Amplifier

Delivery

Orders received before 2pm are usually shipped same day.

We offer free UK mainland delivery on every product we sell, but if you want it fast choose the Express next working day delivery option at checkout.

Express next working day delivery is for UK Mainland orders only, otherwise its a 2 working day service.

We ship normal working days, Monday to Friday, except weekends, bank holidays and public holidays. Unfortunately we do not offer Saturday delivery.

Northern Ireland, Scottish Highlands, Scottish Islands, Isle of Man, Isle of Wight & Scilly Isles additional delivery charges on all orders may apply.

Returns

1. This policy sets out the returns policy for goods or services purchased through the online store operated by CEN UK LTD.

2. To be eligible for a return, your item must be unused and in the same condition that you received it, and it must be in the original packaging.

3. By visiting our website and/or purchasing something from us, you are deemed to have accepted these terms and conditions.

4. Other types of services cannot be returned for a refund, for example where the service begins as soon as you make the payment (e.g. a downloadable software product) or a software, voucher codes, gift cards or gift wrapping service.

5. Under the Consumer Contracts Regulations, if you change your mind about a purchase you have made within 14 working days after the date of delivery, you are entitled to a full refund less our postage and packaging cost of the original purchase price for the goods you wish to return. You will not be entitled to a refund of the cost you incur in returning the item to us.

6. Our standard returns policy entitles you to a full refund of the purchase price less our postage and packaging cost if you change your mind (i.e. the goods or services provided are not faulty or were not described properly) within 14 working days.

7. If the item you purchased was faulty or did not work properly, or you think the item was not as described in the item description, please contact us first before requesting a refund as we may be able to resolve your problem to your satisfaction.

8. Where you would like to return a physical product you have purchased, please contact us to let us know that you will be returning the item. To obtain a refund for a non-physical product (like a service) please contact us for further information about how this can be done.

9. Once your return is received and inspected we'll contact you to let you know whether your refund will be processed or not, and credit your original method of payment, within a certain amount of days.

10. If you haven't received a refund yet where we have told you we have issued one, please check your bank account or card statement to make sure it hasn't been received and then contact your bank as some banks or card companies take a number of days to credit your account.

11. If an item you purchased was purchased with a discount voucher, then we will only refund the amount that you paid (and not the amount the item was listed for).

12. If an item you purchased was in a sale then it may not be eligible for a refund if you have changed your mind. If you are in any doubt please contact us before making the purchase.