|
This is a set of 4 FIC 1200cc Fuel Injector Clinic injectors for any Honda D17, K-Series 2006-2009 & S2000 AP2 2006-2009. This injectors are all flow matched together in a set and will include details flow numbers and tuning data. Typical flow rates of 1200cc/min (110lbs/hr) at 3 bar (43.5psi) fuel pressure. Saturated / High Impedance Ball & Seat Injectors. This injector set features easy to install, drop-in fitment with the factory style connector, no plug conversion required! These injectors utilize the latest technology and provide great linearity and short pulse width repeatability. Plug and Play Honda ECU Data available. This injector set is precisely matched using Fuel Injector Clinic's proprietary Data Match Technology. Each injector is individually serial numbered and the results are provided on the Data Match Sheet providing the most complete flow matching and latency value information available in the industry today. PN# FIC-IS116-1200H
Wholesale Distribution available, contact us and we can
create a
special listing for you!
Wholesale
Distribution
available,
contact
us and we can create a
special listing for you!
Included: 4 FIC EV1 Tall injectors, part number IS119-1200H. The photo is an example of a similar set.
Fuel Injector Clinic's 1200cc/min high impedance injector is the largest high impedance injector compatible with all race fuels and has excellent idle performance in street driven cars while still providing enough fuel to support higher horsepower output on both E85 and gasoline.
The 1200cc high impedance injector can be used with any fuel type based on the stainless alloy valve construction. It is compatible with pump gasoline, E85, Q16, VP Import or any other MTBE oxygenated fuels
Superior short pulse width control and state of the art matching make these injectors easy to tune and provide great drivability.
Fuel Injector Clinic injectors are set up to and include all o-rings needed to fit the factory application for the listed vehicle. If you are using aftermarket or other unusual setups please contact us prior to placing your order to make sure you receive injectors that fit properly.
Every injector is covered against failure caused by defects in original manufacture by our lifetime warranty.
This set of injectors requires you to change the injector plug on the wiring harness in your car. This can be done by soldering in the pigtails (included with purchase) to replace the plugs currently on your harness, or you can choose to purchase the optional plug-n-play adaptors which will convert from the type of plugs on these injectors to the plugs on your harness without any need for cutting or soldering.
This plug conversion is made necessary because FIC always chooses to provide brand new, unused injectors for its performance applications. We do not believe that increasing the chance of a failure due to using remanufactured or core program based injectors is ever warranted.
Specifications
Bottom O-ring Outer Diameter 14mm
Cylinder Quantity 4
Height 53mm
Impedance High-Z
Top O-ring 14mm
Horsepower supported:
WHP on E85 at 43psi 90%DC NA 538.02
WHP on E85 at 43psi 90%DC Supercharged 489.11
WHP on E85 at 43psi 90%DC Turbo 448.35
WHP on E85 at 58psi 90%DC NA 621.42
WHP on E85 at 58psi 90%DC Supercharged 564.92
WHP on E85 at 58psi 90%DC Turbo 517.85
WHP on Gas at 43psi 90%DC NA 699.43
WHP on Gas at 43psi 90%DC Supercharged 635.84
WHP on Gas at 43psi 90%DC Turbo 582.86
WHP on Gas at 58psi 90%DC NA 807.84
WHP on Gas at 58psi 90%DC Supercharged 734.40
WHP on Gas at 58psi 90%DC Turbo 673.20
We have injectors to fit almost every performance application!
Check out our eBay Store or contact
us
|
