Micromotor.eu NLM05 Lima Class 31 / 55 / 81 / 86 Coreless Motor Upgrade
Micromotor.eu NLM05 Lima Minitrains New Motor, DB E 410, SNCF BB 9491, BB 67001, FS E 424/E444, SBB RBe 4/4, SBB Re 4/4, BR Class 81/86, BR Class 31, BR class 55 Deltic, US FP 45 Coreless Motor Conversion Kit (Not ringfield type motors.)
Contents:
Motor
Motor Housing
Shaft Adapter
Motor 1-6702-00
(Lima 220100, 220202-220207, 220209, 220217 ,220233, 220236, 220237, 220240-220245, 220281-220285, 220288, 220293, 220296 )
Micromotor Products Are Designed With a -0.0 + 0.05 mm Tolerance To Be Glue Fitted NOT Friction Fitted.
Recommended Is: Loctite 603 Retaining Compound.
Fitting Instructions Are Via Micromotor Youtube Channel.
(Pictured Locomotive Example (s) Are NOT Included.)
Coreless Motor Information:
Guarantee for 1 year
Do not use with feedback controllers.
Do not use with an analogue low frequency PWM ( Pulse Width Modulation ) Controllers. i.e. H&M Half Wave.
DCC Frequency to at least 16 kHz (Preferred 32 kHz or higher) using the recommended correct coreless motor settings AS ADVISED by the manufacturer of the decoder.
Maximum settings of slow speed starting it is recommended to use the correct coreless motor settings AS ADVISED by the manufacturer of the decoder.
Don’t remove the old capacitor over the motor as the high peaks that the decoder provides on slow running speeds (when it has some resistance) causes a motor coil to burn out and in a lot of cases also a burn out of the decoder.
Micromotor Products Are Designed With a -0.0 + 0.05 mm Tolerance To Be Glue Fitted NOT Friction Fitted.
Recommended Is: Loctite 603 Retaining Compound.
Fitting Instructions Are Via Micromotor Youtube Channel.
(Pictured Locomotive Example (s) Are NOT Included.)
Coreless Motor Information:
Guarantee for 1 year
Do not use with feedback controllers.
Do not use with an analogue low frequency PWM ( Pulse Width Modulation ) Controllers. i.e. H&M Half Wave.
DCC Frequency to at least 16 kHz (Preferred 32 kHz or higher) using the recommended correct coreless motor settings AS ADVISED by the manufacturer of the decoder.
Maximum settings of slow speed starting it is recommended to use the correct coreless motor settings AS ADVISED by the manufacturer of the decoder.
Don’t remove the old capacitor over the motor as the high peaks that the decoder provides on slow running speeds (when it has some resistance) causes a motor coil to burn out and in a lot of cases also a burn out of the decoder.