This sale is for a Parker Hydraulic hose assembly with Seal-Lok O-Ring Face Seal (ORFS) fittings.

33 inches long (tip to tip) 

The ends are both the same size with one end being male and the other end female, so you can connect them together to make a hose as long as you need.

9/16-18 threads

Male fitting:    1J043-4-4  Male Seal-Lok - Rigid - (with O-Ring) - ISO 12151-1-S

Female fitting:   1JC43-4-4  Female Seal-Lok - Swivel - Short - ISO 12151-1-SWSA

Hose:    451ST-4  Parker Super Tough Hose - ISO 11237-1-R17

Hose: 1/4 inch ID x .52 inch OD

3000 PSI Constant Working Pressure Hose.

Parker 451ST hose is for when you need maximum abrasion resistance. 
Parker ST cover provides 450x the abrasion resistance compared to standard rubber covered hose. 
451ST hose is a 3000psi constant working pressure hose, it is ½ SAE 100R1 minimum bend.

Below are the specs for the Parker 451ST-4 hydraulic hose:

                         Performance Characteristics

Media                 
Petroleum base hydraulic fluids and lubricating oils

Hose I.D. (inch)  
1/4

Hose I.D. (mm)    
6.3 mm

Maximum Working Pressure (psi)   
3000

Hose O.D. (inch)    
.52

Hose O.D. (mm)    
13 mm

Maximum Working Pressure (Mpa)    
21,0

Material - Hose Inner Tube    
Synthetic rubber

Material - Hose reinforcement    
one or two braids steel wire

Material - Cover    
Synthetic rubber abrasion resistant, MSHA accepted

Minimum Bend Radius (inch)    
2 inch

Minimum Bend Radius (mm)    
50 mm

Working Temperature (F) Oil Minimum    
-40

Working Temperature (F) Oil Maximum    
+212

Working Temperature (C) Oil Minimum    
-40

Working Temperature (C) Oil Maximum    
+100

Meets Industry Standards    
SAE 100R17 / ISO 11237 - 1 TYPE R17 – Constant Working Pressure

Compatible Fittings    
43 series


Please contact me with any Questions

I usually offer several shipping options. So be sure to select the one that you prefer.