|
|
|
|
|
|
|
Item Features and benefits：
Integrated, compact design that minimizes air pressure drop.
Reduced contamination of the sensing element, increasing reliability.
More accurate airflow detection.
Small size passage structure that is easy to install.
Small, lightweight design
Plug-in type MAF sensors are inserted into the air-intake wall, reducing weight, size and installation time, with no impact on performance.
Better accuracy
The unique bypass passage design prevents air from turning towards the sensing element and reduces air pulsations, allowing for a more accurate measurement and protecting the sensor from contaminants.
Simple installation
Simply insert the part into the sensing element and the air flow meter can be used, making it versatile and usable in a wide variety of air systems.
Fitment:
Ford Expedition 4.6L 1999-2002
Ford Expedition 5.4L 1999-2002
Ford F-150 4.6L 1999-2002
Ford F-150 5.4L 1999-2003
Ford F-150 Heritage 5.4L 2004
Ford F-250 4.6L 1999
Ford F-250 5.4L 1999
Ford F-250 Super Duty 5.4L 1999
Ford F-250 Super Duty 6.8L 1999
Ford F-250 Super Duty 7.3L 1999
Ford F-350 Super Duty 5.4L 1999
Ford F-350 Super Duty 6.8L 1999
Ford F-450 Super Duty 6.8L 1999
Ford F-550 Super Duty 6.8L 1999
Ford F53 6.8L 1999
Ford Lobo 5.4L 1999
Ford Taurus 3.4L 1998-1999
Lincoln Blackwood 5.4L 2002
Lincoln Navigator 5.4L 1999-2000&2002
Package include:
1x Mass Air Flow Sensor/Meter
FAQs
What does a MAF Sensor do?
A mass (air) flow sensor (MAF) is a sensor used to determine the mass flow rate of air entering a fuel-injected internal combustion engine.
Where are these sensors located?
The Mass Air Flow sensor is located in the intake ducting after the air filter.
What are the possible failures of MAF sensors?
MAF sensor contamination or damage is usually caused by an air filter that is in poor condition or incorrectly installed. A damaged or contaminated MAF sensor can still function, but the changes to its characteristics can cause a wide variety of driving problems.
When To Replace the Mass Airflow Sensor?
- Check engine light
- Lean or Rich Fuel Mixture
- Difficulty Starting Your Car
- Engine Stalls After Starting or When Idling
- Engine Hesitation and Dragging Sensation
- Engine Hesitation and Jerking
- Engine Hiccups
How can you prevent and solve MAF sensor failures?
A problem with the MAF sensor can cause the engine warning light to turn on. This fault is stored as a diagnostic trouble code (DTC) in the engine ECU and can be inspected by a DTC scan tool. However, if the root cause of failure is a clogged MAF sensor passage, the engine will usually start, will run poorly or stall, and may not set a DTC. If the MAF sensor is defective, it will need to be replaced. This is a simple process. If the MAF sensor is contaminated, cleaning it may provide a temporary solution, but this may damage the sensor’s delicate hardware. If the MAF sensor is replaced, make sure the air filter is also installed properly.
How can I get the MAF sensor to last longer?
Well, there’s a simple solution – clean the air filter regularly! When you keep the filter clean, you ensure that the sensor isn’t bogged down by debris and dust particles that could clog it up over time. In addition, it’s good practice to take out the entire sensor occasionally and clean it as well.
How to Install a MASS AIR FLOW SENSOR(MAF):
1. Position MAF sensor in the vehicle. Make sure the airflow direction indicated on the sensor is toward the engine.
2. Install sensor to air duct seal(s), if so equipped, on the replacement MAF sensor.
3. Connect the MAF sensor to the throttle body air cleaner ducts. If the sensor mounts directly on the throttle body, install and tighten the mounting screws to 10 ft-lb. DO NOT OVERTIGHTEN!
4. Position clamps over the air duct/MAF sensor connections and tighten. Replace the clamps if necessary. (NOTE: For the MAF sensor to work properly, the sensor/air duct connections must be airtight.)
5. CAREFULLY plug the harness connector lead into the MAF sensor.
NOTES:Before purchase this parts, please check the compatibility information or call your local dealer to verify the correct OEM part number, please contact us if there's any question or problem)
Item Features and benefits：
Integrated, compact design that minimizes air pressure drop.
Reduced contamination of the sensing element, increasing reliability.
More accurate airflow detection.
Small size passage structure that is easy to install.
Small, lightweight design
Plug-in type MAF sensors are inserted into the air-intake wall, reducing weight, size and installation time, with no impact on performance.
Better accuracy
The unique bypass passage design prevents air from turning towards the sensing element and reduces air pulsations, allowing for a more accurate measurement and protecting the sensor from contaminants.
Simple installation
Simply insert the part into the sensing element and the air flow meter can be used, making it versatile and usable in a wide variety of air systems.
Fitment:
Ford Expedition 4.6L 1999-2002
Ford Expedition 5.4L 1999-2002
Ford F-150 4.6L 1999-2002
Ford F-150 5.4L 1999-2003
Ford F-150 Heritage 5.4L 2004
Ford F-250 4.6L 1999
Ford F-250 5.4L 1999
Ford F-250 Super Duty 5.4L 1999
Ford F-250 Super Duty 6.8L 1999
Ford F-250 Super Duty 7.3L 1999
Ford F-350 Super Duty 5.4L 1999
Ford F-350 Super Duty 6.8L 1999
Ford F-450 Super Duty 6.8L 1999
Ford F-550 Super Duty 6.8L 1999
Ford F53 6.8L 1999
Ford Lobo 5.4L 1999
Ford Taurus 3.4L 1998-1999
Lincoln Blackwood 5.4L 2002
Lincoln Navigator 5.4L 1999-2000&2002
Package include:
1x Mass Air Flow Sensor/Meter
FAQs
What does a MAF Sensor do?
A mass (air) flow sensor (MAF) is a sensor used to determine the mass flow rate of air entering a fuel-injected internal combustion engine.
Where are these sensors located?
The Mass Air Flow sensor is located in the intake ducting after the air filter.
What are the possible failures of MAF sensors?
MAF sensor contamination or damage is usually caused by an air filter that is in poor condition or incorrectly installed. A damaged or contaminated MAF sensor can still function, but the changes to its characteristics can cause a wide variety of driving problems.
When To Replace the Mass Airflow Sensor?
- Check engine light
- Lean or Rich Fuel Mixture
- Difficulty Starting Your Car
- Engine Stalls After Starting or When Idling
- Engine Hesitation and Dragging Sensation
- Engine Hesitation and Jerking
- Engine Hiccups
How can you prevent and solve MAF sensor failures?
A problem with the MAF sensor can cause the engine warning light to turn on. This fault is stored as a diagnostic trouble code (DTC) in the engine ECU and can be inspected by a DTC scan tool. However, if the root cause of failure is a clogged MAF sensor passage, the engine will usually start, will run poorly or stall, and may not set a DTC. If the MAF sensor is defective, it will need to be replaced. This is a simple process. If the MAF sensor is contaminated, cleaning it may provide a temporary solution, but this may damage the sensor’s delicate hardware. If the MAF sensor is replaced, make sure the air filter is also installed properly.
How can I get the MAF sensor to last longer?
Well, there’s a simple solution – clean the air filter regularly! When you keep the filter clean, you ensure that the sensor isn’t bogged down by debris and dust particles that could clog it up over time. In addition, it’s good practice to take out the entire sensor occasionally and clean it as well.
How to Install a MASS AIR FLOW SENSOR(MAF):
1. Position MAF sensor in the vehicle. Make sure the airflow direction indicated on the sensor is toward the engine.
2. Install sensor to air duct seal(s), if so equipped, on the replacement MAF sensor.
3. Connect the MAF sensor to the throttle body air cleaner ducts. If the sensor mounts directly on the throttle body, install and tighten the mounting screws to 10 ft-lb. DO NOT OVERTIGHTEN!
4. Position clamps over the air duct/MAF sensor connections and tighten. Replace the clamps if necessary. (NOTE: For the MAF sensor to work properly, the sensor/air duct connections must be airtight.)
5. CAREFULLY plug the harness connector lead into the MAF sensor.
NOTES:Before purchase this parts, please check the compatibility information or call your local dealer to verify the correct OEM part number, please contact us if there's any question or problem)
| Item Specifics | |
|---|---|
| Brand | SCITOO |
| Manufacturer Warranty | 1 Year |
| Manufacturer Part Number | SC127871T01 |
| Interchange Part Number | FORD XW4Z12B579ABRM;XW4F12B579AA |
| Housing Type | With housing |
| Other Part Number | FORD XW4Z12B579ABRM; Mass Air Flow Sensor |
| Air & Fuel Sensor Type | MASS AIR FLOW Sensor/Meter |
| Type | Mass Airflow Sensor (MAF Sensor) |
| Features | With integrated air temperature sensor |
| OE Spec or Performance/Custom | OE Spec |
| Fitment Type | Direct Replacement |
| Material | Plastic |
| Item Color | Black |
| Items Included | 1X Mass Air Flow Sensor |
| Pin-number | 4 Pins |
| Number of Sensors | 1 |
| Sensor Type | Mass Airflow Sensor (MAF Sensor) |
| Connector Type | Male |
| Connector Color | Black |
| Universal Fitment | No |
| Performance Part | No |
| Mounting Style | Bolt-On |
1. Package handling takes about 2 business days at our warehouse, so please make sure entering correct payment and shipping information before checking out. Once your payment is completed, we are not going to accept any more changes to your order.
2.All domestic orders will be shipped via USPS, UPS or Fedex from our US warehouse and usually arrives to your door in about 2-7 business days.
3.Local pick up is not available.
4.International Buyers C Please Note:
a. Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyers responsibility.
b. Please check with your country customs office to determine what these additional costs will be prior to bidding/buying. ]
1.We accept multiple payment methods, such as VISA, Master Card, etc..
2.Please do not use the note field to indicate us to ship to other address. The note there will NOT be read. If you want to change the shipping address, please contact us by eBay messages.
3.(if you want cancel orders or change address pls contact us within 6 hours after payment,or we are not responsible for shipping a replacement.)
4.Payment must be received within 7 days as auction ended or order might be delayed.
We stand behind every product we sell.
All of our brand new items come with a 30-Days money-back or exchange guarantee.
Q: How do I pay for my purchase?
A: MY store accepts VISA, Master Card, etc..
Q: When will the item be shipped out?
A: This item will be shipped with 2 business day once payment completed.
Q: Where is my tracking number?
A: Please log on your account, click "my eBay"-->"my summary", or open your email box and find the shipping notification email.
Q: How do I return an item?
A: My tore accepts returns. Items must be returned within 60 days. Refunds will be given as money back. Please contact our customer service before you return an item. ]
1. We will leave a feedback once we get your payment.
2. If you are dissatisfied for any reason, please do contact us a feedback. We will work hard to make sure EVERY CUSTOMER 100% SATISFIED and resolve any problem for you and always leave a feedback to all our customers.
3. If you are satisfied with the product you received, wish you can leave us a feedback.
Shop Category New List Item
Hot Item
Warranty
|
Mass Air Flow Meter MAF Sensor For Ford F-150 5.4L 1999-2003
Item Features and benefits： Integrated, compact design that minimizes air pressure drop. Reduced contamination of the sensing element, increasing reliability. More accurate airflow detection. Small size passage structure that is easy to install.
Small, lightweight design
Simple installation
Fitment: Ford Expedition 4.6L 1999-2002 Package include: 1x Mass Air Flow Sensor/Meter
FAQs
What does a MAF Sensor do?
Where are these sensors located?
What are the possible failures of MAF sensors?
When To Replace the Mass Airflow Sensor?
How can you prevent and solve MAF sensor failures?
How can I get the MAF sensor to last longer?
How to Install a MASS AIR FLOW SENSOR(MAF):
NOTES:Before purchase this parts, please check the compatibility information or call your local dealer to verify the correct OEM part number, please contact us if there's any question or problem) Shipping
1. Package handling takes about 2 business days at our warehouse, so please make sure entering correct payment and shipping information before checking out. Once your payment is completed, we are not going to accept any more changes to your order. Payment
1.We accept multiple payment methods, such as VISA, Master Card, etc.. 2.Please do not use the note field to indicate us to ship to other address. The note there will NOT be read. If you want to change the shipping address, please contact us by eBay messages. 3.(if you want cancel orders or change address pls contact us within 6 hours after payment,or we are not responsible for shipping a replacement.) 4.Payment must be received within 7 days as auction ended or order might be delayed. Returns
We stand behind every product we sell. Customer Services
Q: How do I pay for my purchase? Feedback
1. We will leave a feedback once we get your payment. Copyright of SCITOO-AutoParts . All rights reserved. |
