BEC RidgeWave 7000 R28-G

 Outdoor Cellular Wireless Gigabit LTE Router

The RidgeWave® BEC 7000 R28-G is a High-Power LTE CAT B CPE-CBSD delivering robust connectivity for CBRS B48 commercial deployments. The 7000 R28-G is an LTE CAT 15 UE supporting carrier aggregation up to 4 CA DL / 2CA uplink, with a high gain 15dBi 4T4R antenna to support DL MIMO 4×4 and UL MIMO 2×4.  CBRS deployments with the 7000 R28-G will experience increased capacity, higher throughput, and extended coverage. 


Unique to BEC devices are GORE® Vents for pressure equalization, humidity, and airflow, accompanied by lighting/ESD Protection and the IP68/UL 50E enclosure to ensure protection against dirt, harmful ingress of water, humidity, and extreme temperatures for years of dependable operation.


The RidgeWave® BEC 7000 R28-G integrates seamlessly with BECentral®, BEC’s proven cloud-based remote management as a complete solution for managing large-scale UE deployments. Administrators can remotely provision, monitor, upgrade, and troubleshoot devices from a single centralized location in real-time. For CAF II or other ETC support recipients, BECentral® fully supports scheduling, testing, report generation, and submission for FCC Performance Measures.


Ideal applications:


Fixed Wireless Last Mile Access

Mission Critical

Industrial

Oil and Gas

Mining

Marine


Multi-Element Adaptive Antenna

4×4 MIMO Patented Dual-Pol Dual-Slant antenna technology ensures faster and efficient bi-directional transmission

Built to Last

IP-68/UL-50E Enclosure, complete protection against dust and water ingress

Ventilation

GORE® Vent for pressure equalization, humidity, and airflow

Wind Tunnel Tested

Successfully operating up to 132mph (F2 Tornado 113-157mph)

Surge /Lightning Protection

IEC 6100-4-2 (ESD) and IEC 61000-4-5 (Lighting)

Extended Temperature Range

-40°C to 70°C (-40°F to 158°F)

PoE Powered

Gigabit LAN Interface with IEEE 802.3at (PoE+) complaint

Corrosion Protection

SurTec treated Die-cast alloy

Form Factor

Under 5lbs, easily mount onto lightweight poles or exterior walls


Network Certification: OnGo, FCC Part 96 Authorized CAT B CPE-CBSD

Supported Frequency Band

Comply 3GPP Rel.12 with Carrier Aggregation
4G/LTE: TDD (Cat.15)
B48 (3550MHz ~ 3700MHz)
Data Rates up to 580Mbps DL and 30Mbps UL  (TDD Config. 2, SSF: 7)
Carrier Aggregation: 4CA DL/2CA UL
LTE Bandwidth: 15MHz, 10MHz, 15MHz & 20MHz
Modulation: 256QAM DL / 64QAM UL
Maximum Transmit Power:  38dBm EIRP
LTE Antenna
MIMO Directional (Dual Polarization)
4×4 MIMO DL / 2×2 MIMO UL
4T4R DL / 2T4R UL
Gain: 15.5dBi ± 1dBi
Operational Modes

Bridge or Routed
Firewall

Built-in NAT Firewall
Stateful Packet Inspection (SPI)
Prevents DoS attacks include Land Attack, Ping of Death, etc.
IP Filtering, MAC Filtering, URL Filtering
Password protection for system management
Access Control and VPN pass-through
SNTP, DNS relay and DDNS
IGMP snooping and IGMP proxy
Network Protocols and Features

NAT, static routing and RIP-1/2
NAT supports PAT and multimedia applications
Virtual Server and DMZ
SNTP, DNS relay and DDNS
IGMP snooping and IGMP proxy
Quality of Service Control

Supports the DiffServ approach
Traffic prioritization based on protocol, port number, and IP address
Management

Quick Installation Wizard
Web-based GUI for remote and local management
Firmware upgrade and configuration data upload & download via web-based GUI
DHCP server/client/relay
TR-069 supports remote management
BECentral® Cloud Management
SNMP and Syslog monitoring
Physical Interface

Gigabit LAN Interface with IEEE 802.3at compliant PoE P.D
WAN: 4G LTE
SIM Card: One (1) slot 2FF Size
LED Indicators: Power, LAN(PoE), LTE Signal Strength, and Internet
Power Specifications

Input: PoE-PD (802.3at PD complaint (25.5W))
Operating Environment

Operating temperature: -40°C to 70°C (-40°F to 158°F)