There is a film on the prewired loaded pickguard to prevent scratches and damage.
Please remove the film before installing loaded strat pickguard on your guitar.
Product Description
Model: HHH Strat Pickguard
DC resistance (approx.):
Neck Humbucker: 7.5K (splitting coil 3.75K)
Middle Single Coil: 7.5 K(splitting coil 3.75K)
Bridge Humbucker: 15K (splitting coil 7.5K)
Hole spacing N:50 mm M:50 mm B:52 mm
Humbucker four conductor wires: black wire is hot, green wire is ground, red and white is for splitting coil
Material: PVC pickguard and copper coil Pickup
Weight: 700 grams per set
Accessories: 11 screws
Tip: Please check the pickguard size chart carefully before purchasing to make sure the hole pattern is compatible with your pickup, or be prepared to make any necessary adjustments!
Compatibility:
Suitable for most Fender (FD) guitars.
Installation Difficulty: Rated as very easy to install.
Weight: 700 grams per set.
Accessories Included:
1 x 3-ply guitar pickguard
3 x Alnico 5 humbucking pickups
1 x 5-way switch
1 x Enhanced switch
3 x Potentiometers (1 volume, 2 tone, copper shaft)
4 x Single Cut Toggle Switches
1 x 400V/200V Capacitor
1 x Output Jack
11 x Screws
In addition to the original function, the two single-cut toggle bring new functions, as follows.
1.When the Multi switch toggle (first toggle) is on, the neck pickup is active regardless of the setting on the 5-way.
for example, toggle on + 5-way at the bridge = neck and bridge pickup work together.
2. Bridge Pickup have single-cut (Push-Pull) switch (second toggle). After turning on the single-cut switch, you will getdifferent tone, Double coil pickup will change to single coil pickup tone, the feature will be powerful.
📏 Size & Fitment 🎨 Color
Musical instrument parts may vary slightly across different models, years, and manufacturers.“Universal fit” is for reference only and does not guarantee full compatibility.
Please carefully check all measurements and compare with your original part before purchase.
Minor dimensional variations may occur due to manufacturing processes and manual measurement.
These tolerances are normal for precision-made components and do not affect function or installation.
Product images are taken from actual items, but slight color variations may occur due to lighting, camera settings, and display differences.
Actual product shall prevail.