Hormann Type 868Mhz HSM4 Remote

Compatible with:

HORMANN HS1, HS2, HS4 868

HORMANN HSE2 868

HORMANN HSM2, HSM4 868

HORMANN HSP4, HSP4-C 868

HORMANN HSD2-A, HSD2-C 868

HORMANN HSZ1, HSZ2 868

It is only compatible with the Hormann 868MHz blue button


Specifications:

Type of programming: self Copy

Number of channels: 4

Size: 60*30*12mm

Product material: ABS

Product weight: 40 g

Product color: Black + silver

Rated voltage: 12V 30A

Installation: wireless



Frequency: 868MHz, 868.3MHz

Usage: Fifteen seconds clone, can be used directly after cloning

Features:

1. Privacy is strong

2. One to one key copy

3. Each key password alone save

4. Can continuous repetitive copy use one million times

100% compatible with the following remote control models



Supplied with programming instructions

Hormann Garador 868Mhz HSM4 Blue Buttons Programming

 

1.    If you don’t have an original Hormann remote.

 

A.    Factory Setting: Program the new remote with the receiver same as original. (Press and hold the learn button on the the receiver for 2-3 seconds, then press any button of the remote that you want to be learned)

 

2.    If you have the working original Hormann remote.

 

   

B.    You can copy the code from your original Hormann face to face as follow steps:

 

a: Clear the code: Press and hold button 4 and button 2 until the led flash quickly. Release button 2, then press button 2 for 3 times slowly, the LED will flash quickly, release two buttons (press any button, no led flash, the code is deleted)

 

b: Copy the code: Press and hold button 1 of the original Hormann, then press and hold button 1 of the duplicator until you can see the duplicator’s LED flash, release both buttons, finish copy, copy other buttons in the same way.

 

3.    Reset Code

Press and hold the button 1 and button 3 at the same time about 5 seconds until the LED flash quickly, the code is back to factory setting.

 

4.    Remark

 

Button 1 – UP with 1 dot                  Button 3 – Down Button with 3 dots

 

Button 2 – RIGHT with 2 dots          Button 4 – LEFT Button with 4 dots




You should also be able to copy directly from the operator itself.

 If you press the ‘L’ Button on the operator a light will ‘blink’

then press the button on the remote you want to use., both lights will ‘blink’

Your new remote is ready to use!

(The ‘L’ button can be found on the rear of the operator)




                   
GDS UK Garage Door Spares LTD