Condor MDR 1 Pressure Switch for Single Phase Air Compressors 212157 MDR1/11
The
Condor MDR1 pressure switch can be used for single phase compressors or
as a pressure switch to provide a signal to the control circuit in a
larger compressor. You can see just how the product works in the video
below.
The MDR1 pressure switch is now supplied with differential kit as standard, this allows greater control over the cut out pressure of the switch.
On the underneath of the MDR1 switch there is an unloader valve with a 6mm push in connection. The function of the unloader valve is to remove the pressure from the piston of a compressor so that when it re-starts it can move freely and prevent the motor from stalling.
The MDR1 pressure switch is supplied with a delayed unloader valve (AEV 1S) as standard. If you need an unloader valve without delay (EV 1S), this can be ordered separately.
Cable glands are included with this product.
The MDR1 pressure switch is now supplied with differential kit as standard, this allows greater control over the cut out pressure of the switch.
On the underneath of the MDR1 switch there is an unloader valve with a 6mm push in connection. The function of the unloader valve is to remove the pressure from the piston of a compressor so that when it re-starts it can move freely and prevent the motor from stalling.
The MDR1 pressure switch is supplied with a delayed unloader valve (AEV 1S) as standard. If you need an unloader valve without delay (EV 1S), this can be ordered separately.
Cable glands are included with this product.
| Technical Details | |
| Max Voltage | 500V |
| Max Current | 20A |
| Switching Capacity | 4.0KW |
| Frequency: | 50/60Hz |
| Max Pressure | 11 Bar |
| Connections | 1x 3/8" BSP + |
| 3x 1/4" BSP Female | |
| Condor | MDR1/11 |
| Ref | 212157 |
Dimensions
Circuit Diagram
Cut In/Out Pressure
