IGT Slot Machine Part
IGT PLAYERS EDGE + Series CAPX #1321 COLOR ATTRIBUTE PROM
Please Note: You will not receive the
exact one pictured, that is for reference only. We will ship one in
similar condition. We have thousands of slot machine parts, please let
us know what you are looking for.
FREE AND FAST SHIPPING, usually the same day.
If you have any questions, please ask, we are here to help!
Please check out our other auctions for more slot machine and amusement parts.
Thank you and Game On!
Sales * Service * Repair * Parts * Trade * Buy
PINBALL ARCADE SLOT MACHINES
Bally Atari Bally
Data East Coast To Coast CEI
Gottlieb Data East IGT
Jersey Jacks Global VR Jennings
Sega Konami Konami
Spooky Pinball Midway Mills
Stern Namco Pace
Williams/WMS Nintendo Sigma
Sega Williams
Taito
-------------------------------------------------------------------
USING THE IGT S+ SERIES RAM CLEAR CHIP
This chip will clear the on board RAM chip and the back-plane board EEPROM chip.
If you also have a bill acceptor it will also clear the settings that enabled it, you would
need a Set Denomination chip to re-enable the bill acceptor. Check our other auctions for a Set Denomination Chip.
Step 1. The Program or Game chip has a part number that starts with “SP”.
Remove the program chip from the game board, use the cautions outlined on the attached
paper to ensure proper removal. Try to remove the program chip without bending any legs.
It is normal to pry the whole chip out when only one side has it’s pins pulled out. This will
bend pins on the other side of the chip. If any pins are bent straighten them carefully.
Step 2. Install the clear chip in the socket where you removed the program chip, again read the
attached paper concerning the proper alignment of the chip’s notch in relation to the
notch on the socket.
Step 3. Leave the game door open, plug the game board back into the game, turn power on.
When you turn power on you should hear a *ding*.
Watch your door display and hold in the small self test button until you hear a second
*ding*. Release the self test button and watch the display on your door count up until
it shows 999 on the display.
Step 4. Your board is now cleared. Turn power off and remove the clear chip and put the
program chip back in.
Step 5. Turn on machine power and watch the display. You will see a “61” on the display.
Press the test button and the display should change to “61-1”.
Close the door and turn the jackpot reset key and release.
Wait a while and the game should initialize and the reels will spin and line up
at the start position on all reel strips.
This chip will clear the on board RAM chip and the back-plane board EEPROM chip.
If you also have a bill acceptor it will also clear the settings that enabled it, you would
need a Set Denomination chip to re-enable the bill acceptor. Check our other auctions for a Set Denomination Chip.
Step 1. The Program or Game chip has a part number that starts with “SP”.
Remove the program chip from the game board, use the cautions outlined on the attached
paper to ensure proper removal. Try to remove the program chip without bending any legs.
It is normal to pry the whole chip out when only one side has it’s pins pulled out. This will
bend pins on the other side of the chip. If any pins are bent straighten them carefully.
Step 2. Install the clear chip in the socket where you removed the program chip, again read the
attached paper concerning the proper alignment of the chip’s notch in relation to the
notch on the socket.
Step 3. Leave the game door open, plug the game board back into the game, turn power on.
When you turn power on you should hear a *ding*.
Watch your door display and hold in the small self test button until you hear a second
*ding*. Release the self test button and watch the display on your door count up until
it shows 999 on the display.
Step 4. Your board is now cleared. Turn power off and remove the clear chip and put the
program chip back in.
Step 5. Turn on machine power and watch the display. You will see a “61” on the display.
Press the test button and the display should change to “61-1”.
Close the door and turn the jackpot reset key and release.
Wait a while and the game should initialize and the reels will spin and line up
at the start position on all reel strips.
