DRAWER 211, 212 AND 213

THE METAL PLATING ON THESE HAS SOME VERY LIGHT "WHITE" CORROSION ON THEM THAT DOES NOT LOOK THAT BAD OR i WOULD NOT SELL THEM.

NEW OLD STOCK WITH SOME LIGHT WHITE CORROSION. NOT HARD RUST BUT THE SURFACE FEELS ROUGH. THE LEAD WIRE IS GETTING STIFF FROM AGE. IF YOU BEND IT SHARPLY HEAT IT WITH A HAIR DRYER OR HEAT GUN FIRST.  LIGHT GENTLE MOVEMENT IS FINE. ALL WERE TESTED ON 6 VOLTS D.C. AND RUN VERY QUIET !   I CAN NOT HEAR THEM WHEN THEY ARE RUNNING. THESE ARE NOS FROM THE 80'S.  MOST OF THE YALE STICKERS HAVE COME OFF THE BOTTOM.

BUY IT NOW IS FOR ONE MOTOR WITH PULLEY, BELT, HEX KEY AND THE 2 MOUNTING SCREWS.

Look closely at the pics (#3) and you will see that these came with a round head set screw that used a flat blade screw driver to adjust. These were tossed and replaced with a stainless steel socket hex set screw. This uses a small hex key that you may not have so I have included one with every motor. Each motor also comes with a nice new drive belt. This motor has a nickel plated brass pulley instead of cheap plastic. Each motor also has the 2 mounting screws.

 THE TACHOMETER HAS 1 DECIMAL POSITION FOR THE RPM'S

  These are great to use for do it yourself projects or Radio control, hobby or robot etc.

These run very smoothly and quietly and you can see in the pictures one was tested to show the actual rpm's at 6 volts D.C.

Please note that all of the extra items that are seen in the photographs are used for illustration and measuring purposes only and are not part of the sale. 

If you pay by noon Eastern time I will mail your package the very same day !

  This will be rolled in extra bubble wrap and then GO IN A CORRUGATED BOX for protection so you will receive it in one piece.