Stator for KTM 65 SX 2009-2023 / Mini 2018 / SXS 2012-2013 / XC 2009 | Husqvarna TC 65 2017-2020 | OEM # 46239004000

Brand new aftermarket Stator

Direct replacement to your original unit

Plug-and-play, direct fit, easy installation

All item pictures are accurate

All products shipped are tested

Battery condition is important. No stator can make up for a bad or weak battery. If in doubt charge your battery and have it load tested, or simply replace it. ALWAYS START WITH A FULLY CHARGED BATTERY !

Brand new aftermarket Stator

• Direct replacement to your original unit
• Plug-and-play, direct fit, easy installation
• Highest grade of lamination materials
• Highest grade of copper winding, resistant to 200 degrees Celsius
• Pick up pulsar coil included
• Connectors included
• Rubber grommet included
• Back Plate included
• All products shipped are tested

We have even included the opposite connector (main harness side) as we know these are often melted / corroded / defective and a major cause of repetitive electrical issues.

All item pictures are accurate; if in doubt, do not hesitate to compare our item to your original part.

KTM 65 SX -- 2009-2017, 2019-2023
KTM 65 SX Mini -- 2018
KTM 65 SXS -- 2012-2013
KTM 65 XC -- 2009

46239004000

Dimensions :
Interior diameter : 28 mm
Exterior diameter : 61 mm
Thickness : 14 mm
Length of wires stator to grommet : 120 mm
Length of wires grommet to plug : 500 mm

Other specifications :
Number of wires : 4
Number of plugs : 1
Number of pins : 4
Number of poles : 8

Wire to wire resistance :
Source : Red to Blue = 18 ohms +-20%
Pickup : White/Red to White/Green = 100 ohms +-20%

Before installing your new Stator

• Check the AC output of the stator
• Replace any burned or corroded connectors on stator and regulator rectifier
• Check and repair any melted wiring
• Use hi-temp dielectric grease on all connectors

Our stator might have a different wire color code than your original part.
All the wires are installed in the correct order; please do not change any of the wiring configurations.
This stator is designed as a direct plug-in replacement and should be used as such.
When bolting stator in, always use locking compound.
If our stator includes a pickup coil, always make sure the air gap is correct upon installation; we suggest as close as possible but no less than 0.010".

Warning:

Risk of electric shock. Disconnect the battery before servicing.
Ensure proper installation by a qualified technician to avoid malfunction.

We deliver 99.4% of our orders within the specified time period. If your item is not available in our main Colorado facility, we still guarantee that your order will be delivered within the specified time period.

If your item is not delivered within this time period, we will offer you a 5.00$ discount on your order. This guarantee applies to shipments delivered in the 48 continental USA states, excluding PO boxes.