Stator for Scooter Moped Go Kart GY6 125cc 150cc / QMI152 QMI157 QMJ152 QMJ157 Engines - 11 Coils

 
KEY FEATURES
 

Brand new aftermarket Stator

Direct replacement to your original unit

The quality exceeds the OEM equipment

All products shipped are tested

DESCRIPTION

 

Battery condition is extremely important. No stator can work correctly with a bad or weak battery. Always fully charge your battery before performing any charging system tests or replacing parts. If there is any doubt, have the battery load tested or replaced.

There are 3 possible stators for GY6 scooters. Please verify the number of coils and wires.

Brand new aftermarket stator

  • Direct replacement to your original unit
  • Plug-and-play, direct fit, easy installation
  • Highest grade lamination materials
  • Highest grade copper windings, resistant to 200 degrees Celsius.
  • Pick up pulsar coil included
  • Connector included
  • Rubber grommet included
  • All products shipped are tested

All item pictures are accurate; if in doubt do not hesitate to compare our item to your original part.

Vehicle models fitment
 

Scooter GY6 125cc 4 Stroke -- 0
Scooter GY6 150cc 4 Stroke -- 0
Scooter QMI152 Engine -- 0
Scooter QMI157 Engine -- 0
Scooter QMJ152 Engine -- 0
Scooter QMJ157 Engine -- 0

OEM part replacement
 

RMS010-102447

Specifications
 

Dimensions :
Interior diameter : 28 mm
Exterior diameter : 88 mm
Thickness : 10 mm
Length of wires stator to grommet : 140 mm
Length of wires grommet to plug : 150 mm
Length of pickup coil's wire to grommet : 420 mm

Other specifications :
Number of wires :6
Number of plugs : 3
Number of pins : 6

Wire to wire resistance :
Alternator : Yellow Between Yellow = 0.4 ohms +-20%
Pickup : Blue/White To Ground = 150 ohms +-20%
Source : Black/Red to ground = 350 ohms +-20%

instructions
 

Before installing your new stator

  • Check the AC output of the stator
  • Replace any burned or corroded connectors on stator and regulato rrectifier
  • Check and repair any melted wiring
  • Use hi-temp dielectric grease on all connectors

Our stator may use a different wire color code than your original.
All of the wires are installed in the correct order; please do not change any of the wiring configurations.
This stator is designed as a direct plug-in replacement and should be used as such.
When bolting stator in, always use locking compound.
If our stator includes a pickup coil, always make sure the air gap is correct upon installation; we suggest as close as possible no less than 0.010".

Warning:

Risk of electric shock. Disconnect the battery before servicing.
Ensure proper installation by a qualified technician to avoid malfunction.

SHIPPING

 

We deliver 99.4% of our orders within the specified time period. If your item is not available in our main Colorado facility, we still guarantee that your order will be delivered within the specified time period.

If your item is not delivered within this time period, we will offer you a 5.00$ discount on your order. This guarantee applies to shipments delivered in the 48 continental USA states, excluding PO boxes.

Videos