- 14" LONG REBAR SPIKES - Rebar stakes designed for asphalt, blacktop, tarmac, macadam, concrete, and pavement installations. 14-inch length with a 1/2-inch diameter is ideal for traffic and parking applications.
- ASPHALT INSTALLATIONS - Suitable mounting hardware for permanent installation in asphalt. Versatile use to anchor speed bumps, parking curbs, wheel stops, cable protectors, cord covers, handicap threshold ramps, and more.
- STRONG-HOLDING - Ribs on the metal stakes allow for good gripping when driving them into the hard ground. Steel stakes can also be used as heavy duty tent stakes, canopy stakes, tarp stakes, or fence stakes.
- GALVANIZED STEEL - Threaded steel with a galvanized surface coating installs more firmly in various hard surfaces. Long-lasting design is weather-resistant and rustproof. Rebar support for reliable long term use.
- EASY TO INSTALL - Drill 3 to 4 inches into the asphalt, taking care to match the corresponding holes in the speed bump or parking block. Using a hammer, drive the spikes through the holes until flush with the device.
Ensure your parking blocks, speed bumps, and traffic installations are properly installed and anchored with these 14-Inch Length Rebar Spikes. A wide, flat head with chisel point allows for easy hammering and penetration into hard surfaces. These rebar stakes are designed for use on asphalt, blacktop, tarmac, macadam, concrete, and pavement.
PRODUCT FEATURES:
Galvanized Alloy Steel
Made for Asphalt
Better Grip & Strong Hold
Dimensions: 14” long; ½” width; 1.1” head
HEAVY DUTY FOR HARD SURFACES
According to structural designers, engineers, and construction experts, steel rebar stakes offer immense structural strength and anchoring ability. Suitable for a wide variety of outdoor applications including the anchoring of fences, canopies, large tents, and tarps. Especially on dry, hard, unyielding earth or rocky soil.
TRAFFIC SPEED BUMPS & PARKING INSTALLATIONS
Suitable mounting hardware for permanent installation in asphalt. Versatile use to anchor speed bumps, parking curbs, wheel stops, cable protectors, cord covers, handicap threshold ramps, and more. Strong-holding spike design with ribs provide good grip when driving it into the ground. Threaded/ribbed steel installs more firmly.
GALVANIZED FOR ALL WEATHER CONDITIONS
Galvanized steel coating is ideal whenever chances of corrosion are higher, as in outdoor installations. The rebar stakes undergo several processes to achieve a zinc coating on the surface. This coating provides a protective shield over the rebar, preventing corrosion.
EASY TO INSTALL
1. Drill 3 to 4 inches into the asphalt, matching the speed bump or parking block holes.
2. Using a hammer, drive spikes through holes.
3. Hammer down until spike head is flush with device.
Overcome workplace hazards and dangerous jobsite challenges with the reliable safety and security of Xpose Safety products.