STOP: YOUR MAGLITE or Flashlight Must use this type of PR Flange base bulb for the LED upgrade to work.
The 2-CELL Maglite MAG-NUMSTAR Bulb II Xenon; This bulb is be brighter than normal incandescent. The MAG-NUMSTAR bulb is rated for 3-Volts which on new 2-cell batteries. The output it’s about 49 lumens at 2.6 Volts (NiCad or NiMh batteries) and 73 Lumens at 3.0V (Alkaline Batteries). The MAG-NUMSTAR has 0.97Amps Current Drain.
These Xenon bulbs have a brighter spot beam focused in the Maglite with new batteries but will have a shortened bulb and battery life.
· The LEDs will be brighter than the bulbs as the batteries discharge and should never need replacement. For some uses you may prefer the Xenon bulb option over the LED.
· LED will have about a 4x-5x longer run time and be bright with near constant brightness with new or half-used batteries or even work with NiCad or Lithium batteries.
Cree LED 10W Bulb for MAGLITE® 2-Cell 3V Flashlights 2.7-3.3V Replace old Krypton
https://www.ebay.com/itm/332506106729
We recommend our best DC-DC LEDs below which are brighter more efficient (lower current) LEDs.
STOP! - We Aslo Recommend these LEDs also have a Great Upgrade LEDs made for both Regular or Rechargeable NiCad or Ni-Mh 1-6-cell lights !
We recommend these regulated DC/DC LEDs to get the most light out of your batteries to be bright on low voltage batteries with high brightness
from 1.5 Volt to 9V when batteries are new or event half discharged!
· 5-Watt Cree at 255 Lumens - LED Upgrade Bulb for MAG-LITE® 1-6 Cell Flashlights Replace Krypton
https://www.ebay.com/itm/231647635036
· 3W Epistar at 200+ Lumens - LED Upgrade Bulb for MAG-LITE® 1 to 6 Cell Flashlights 0.4A, 1- 9 Volt
https://www.ebay.com/itm/232341382951
·
--- Super Bright Led's for Less ---
| |
1) Warning! - Do not look directly into lit Lamps at a close distance or shine into eyes, as they are extremely bright and could cause eye damage. | |
| |
2) Warning! - For safety always follow manufactures safety and operational instructions. | |
| |
3) Caution! - Remove batteries, turn-off or disconnect power before changing bulb. | |
|
★ FEEDBACK: Please return a positive review for good service, We automatically leave positive feedback for all customers. Thank You.
We provided exemplary customer service and satisfaction guarantee"
© 2021-2022 Draco Products. All Rights Reserved