M8 Socket Cap Allen Screw Bolt A2/304 Stainless Steel Under 45mm

M8, 8mm Diameter (1.25mm Pitch), Standard Coarse Thread, Cap Head, Hexagon Socket Screw/ Allen Bolt, A2 304 Stainless Steel, DIN 912, ISO 4762 Fixaball sells lengths of M8 x 1.25mm Pitch (Standard Coarse Thread), A2/ 304 Stainless Steel, Allen Socket Cap Screw/ Bolts. Descrcription: M8 socket cap screw/ bolts.Material: A2/ 304 Stainless Steel.Coating/ Finish: None.Thread: Threads are metric coarse M8 x 1.25mm pitch.Head diameter: 13.2mm.Head height: 8mm.Allen key size: 6mm.Standard: DIN 912.Note: Bolt lengths do not include the head. What is a socket cap screw/ bolt? The, ‘Socket Cap Screw/ Allen Bolt,’ term is used to describe a fastener that is either fully or partially threaded. A screw is fully threaded and a bolt is partialy threaded. Some engineers may call them screws if the person uses the shorter length range of sizes. The thread stays the same length as the fastener gets longer and the maximum length of thread is equal to 2.5 times the diameter (or thereabouts). ‘Socket,’ refers to the hexagon shaped indentation found on the top of the fasteners’ head. Here, you can use a hexagon key (Allen Key) to tighten and loosen the fastener. 'Cap' refers to the cylindrical shaped head. Orders placed before 2pm are dispatched same day (Mon-Fri). Standard, Free Delivery is Royal Mail, 2nd Class (2-5 days, most likely 2 days). For a faster delivery time, select 1st class or courier at checkout. Please make your 'No. of Items in Pack', 'Length' and 'Quantity' of packs, selection from the drop down menus. M8, Socket Screw, Cap Head, A2/ 304 Stainless Steel, DIN 912 descriptions: M8 X 10 SOCKET CAP SCREW DIN 912 / ISO 4762 A2-70 STAINLESS STEEL M8 X 12 SOCKET CAP SCREW DIN 912 / ISO 4762 A2-70 STAINLESS STEEL M8 X 14 SOCKET CAP SCREW DIN 912 / ISO 4762 A2-70 STAINLESS STEEL M8 X 16 SOCKET CAP SCREW DIN 912 / ISO 4762 A2-70 STAINLESS STEEL M8 X 18 SOCKET CAP SCREW DIN 912 / ISO 4762 A2-70 STAINLESS STEEL M8 X 20 SOCKET CAP SCREW DIN 912 / ISO 4762 A2-70 STAINLESS STEEL M8 X 22 SOCKET CAP SCREW DIN 912 / ISO 4762 A2-70 STAINLESS STEEL M8 X 25 SOCKET CAP SCREW DIN 912 / ISO 4762 A2-70 STAINLESS STEEL M8 X 30 SOCKET CAP SCREW DIN 912 / ISO 4762 A2-70 STAINLESS STEEL M8 X 35 SOCKET CAP SCREW DIN 912 / ISO 4762 A2-70 STAINLESS STEEL M8 X 40 SOCKET CAP SCREW DIN 912 / ISO 4762 A2-70 STAINLESS STEEL M8 X 45 SOCKET CAP SCREW DIN 912 / ISO 4762 A2-70 STAINLESS STEEL FIXABALL – Specialist Fixings and Fasteners Suppliers Hexagon/ Allen Key Sizes METRIC – Allen Socket, Cap Head, Screw Bolts Allen Socket, Cap Head Screw Size Diameter Allen/ Hex/ Hexagon Key Required to tighten and loosen M6 5 Available Materials: A2/ 304 Stainless Steel. Material/ Finish Appearance Level of Corrosion Resistance Typical Application A2/ 304 Stainless Steel Dull Shine External Intermittent weathering What is Metric Coarse and What is Metric Fine? Different threads have different applications. Metric System threads are measured in millimetre (mm) units and were developed to simplify the imperial (Inch) systems. A coarse thread has less helical coils per mm and a fine one has more. Coarse is used for heavier/ higher torque loads. Image is for illustrative purposes only.

M8 Socket Cap Allen Screw Bolt A2/304 Stainless Steel Under 45mm

M8, 8mm Diameter (1.25mm Pitch), Standard Coarse Thread, Cap Head, Hexagon Socket Screw/ Allen Bolt, A2 304 Stainless Steel, DIN 912, ISO 4762

Fixaball sells lengths of M8 x 1.25mm Pitch (Standard Coarse Thread), A2/ 304 Stainless Steel, Allen Socket Cap Screw/ Bolts.

Descrcription: M8 socket cap screw/ bolts.
Material: 
A2/ 304 Stainless Steel.
Coating/ Finish: 
None.
Thread: 
Threads are metric coarse M8 x 1.25mm pitch.
Head diameter: 
13.2mm.
Head height: 
8mm.
Allen key size: 
6mm.
Standard: 
DIN 912.
Note: 
Bolt lengths do not include the head.

What is a socket cap screw/ bolt?

The, ‘Socket Cap Screw/ Allen Bolt,’ term is uséd to describe a fastener that is either fully or partially threaded. A screw is fully threaded and a bolt is partialy threaded. Some engineers may call them screws if the person uses the shorter length range of sizes. The thread stays the same length as the fastener gets longer and the maximum length of thread is equal to 2.5 times the diameter (or thereabouts). ‘Socket,’ refers to the hexagon shaped indentation found on the top of the fasteners’ head. Here, you can use a hexagon key (Allen Key) to tighten and loosen the fastener. 'Cap' refers to the cylindrical shaped head.

 

Orders placed before 2pm are dispatched same day (Mon-Fri).

Standard, Free Delivery is Royal Mail, 2nd Class (2-5 days, most likely 2 days). For a faster delivery time, select 1st class or courier at checkout. 

Please make your 'No. of Items in Pack', 'Length' and 'Quantity' of packs, selection from the drop down menus.


    M8, Socket Screw, Cap Head, A2/ 304 Stainless Steel, DIN 912 descriptions:

    M8 X 10 SOCKET CAP SCREW DIN 912 / ISO 4762 A2-70 STAINLESS STEEL
    M8 X 12 SOCKET CAP SCREW DIN 912 / ISO 4762 A2-70 STAINLESS STEEL
    M8 X 14 SOCKET CAP SCREW DIN 912 / ISO 4762 A2-70 STAINLESS STEEL
    M8 X 16 SOCKET CAP SCREW DIN 912 / ISO 4762 A2-70 STAINLESS STEEL
    M8 X 18 SOCKET CAP SCREW DIN 912 / ISO 4762 A2-70 STAINLESS STEEL
    M8 X 20 SOCKET CAP SCREW DIN 912 / ISO 4762 A2-70 STAINLESS STEEL
    M8 X 22 SOCKET CAP SCREW DIN 912 / ISO 4762 A2-70 STAINLESS STEEL
    M8 X 25 SOCKET CAP SCREW DIN 912 / ISO 4762 A2-70 STAINLESS STEEL
    M8 X 30 SOCKET CAP SCREW DIN 912 / ISO 4762 A2-70 STAINLESS STEEL
    M8 X 35 SOCKET CAP SCREW DIN 912 / ISO 4762 A2-70 STAINLESS STEEL
    M8 X 40 SOCKET CAP SCREW DIN 912 / ISO 4762 A2-70 STAINLESS STEEL
    M8 X 45 SOCKET CAP SCREW DIN 912 / ISO 4762 A2-70 STAINLESS STEEL

     

    FIXABALL – Specialist Fixings and Fasteners Suppliers

    Hexagon/ Allen Key Sizes

    METRIC – Allen Socket, Cap Head, Screw Bolts

    Allen Socket, Cap Head Screw Size Diameter

    Allen/ Hex/ Hexagon Key Required to tighten and loosen

    M6

    5

     

    Available Materials: A2/ 304 Stainless Steel.

    Material/ Finish

    Appearance

    Level of Corrosion Resistance

    Typical Application

    A2/ 304 Stainless Steel

    Dull Shine

    External

    Intermittent weathering

     

    What is Metric Coarse and What is Metric Fine?

    Different threads have different applications. Metric System threads are measured in millimetre (mm) units and were developed to simplify the imperial (Inch) systems. A coarse thread has less helical coils per mm and a fine one has more. Coarse is uséd for heavier/ higher torque loads.

     

     Image is for illustrative purposes only.

    Postage info

    Click the Postage tab above the listing description for more info

    Additional delivery notes

    PICK UP OPTION

    Sorry, our items are NOT available for pick-up.

    PAYING VIA PAYPAL


    We accept PayPal on our all our items so you can shop with confidence.

    Simple choose the PayPal option when proceeding through the checkout.

    Paying via Direct Deposit

    Simply add the freight cost to the item cost and forward the total amount to the address to be provided following your purchase.

    Additional Information

    No additional information at this time

    Ask seller a question

    To contact our Customer Service Team, simply click the button here and our Customer Service team will be happy to assist.

    Ask seller a question

    © Fixaball

    Click the Postage tab above the listing description for more info

    Accepted Payment Methods

    • PayPal
    • Direct Deposit

    Returns are accepted

    Items must be returned within 30 days of the auction ending

    Buyer will pay for return shipping.


    Additional Information:
    Returns 'NO QUIBBLE' Our returns policy lasts 30 days. If 30 days have gone by since delivery, unfortunately we can’t offer you a refund or exchange (+ a couple of days, grace). To be eligible for a return, your item must be unuséd and in the same condition that you received it. It must also be in the original packaging with original documentation. A restocking fee of 15% will be applied to refunds. Cost of sending the shipment is not refunded unless the wrong item was sent. To complete your return, we require a receipt, invoice or other proof of purchase. This will enable an easier process of locating and amending orders. Please keep all labels, stickers and original packaging to be eligible for free returns. Refunds (if applicable) NO QUIBBLE - We invite all people to stay with us as their preferred supplier of fixings and fasteners. If you're not happy, we will do everything possible to help. Please, please, please keep all documents, stickers, labels and packaging; it makes the process run quicker and easier. Orders over £1000 need to be returned within 5 working days to be accepted, processed and refunded. Late or missing refunds (if applicable) If you haven’t received a refund on the day of return please contact us to verify the situation. Banks vary in their reaction time to changes; there is often some processing time before a refund is posted. Any concerns no matter how small, contact: 01242 522244 Sale items (if applicable) Only regular priced items may be refunded, unfortunately sale items cannot be refunded. Exchanges (if applicable) NO QUIBBLE - All exchanges are welcomed, assuming that items are suitable for re-sale. Please, return the item with the invoice and a note describing what you would like as an exchange. AN invoice will be sent to cover the postage to send the exchanged item. Free returns are available in the very rare event that we have sent an incorrect item. Orders over £1000 need to be returned within 5 working days to be accepted, processed and exchanged. Shipping 99% of orders are dispatched the same day as purchase if the order was made before 2pm. After 2pm your order will join the following days post. Royal Mail deliver most items up to 2kgs and Interlink Express deliver our oversized and heavier items, next day. Usually, the easy bit is getting the order out the door, but, what happens after can occasionally disappoint us both. If delivery is crucial/ time sensitive, you should select a faster and/ or signed for postage option at checkout. Mailing Disclaimer 98% (490 orders) of shipping arrives on time. 2% (10 orders) are late 1.4% (7 orders) 1 day late 0.4% (2 orders) 2 days late 0.2% (1 order) 3+ days late 0.01% is reported lost. - 1 every couple of years Our 'NO QUIBBLE' guarantee gives you peace of mind that we will accept all, undamaged returns and issue a refund, every time. If you need a definite arrival time please select an express service at check out to avoid disappointment.