Lodar 2 Function Wireless Remote Control for Winch 92100
Lodar 2 Function Wireless Remote Control for Winch 92100
Lodar · Wireless Radio Remote System · 2 Function Receiver & Transmitter
Lodar wireless radio remote system complete
- Standard system
- No Master Output
- 2 Function Receiver & Transmitter
- 60 metre range
- IP67 receiver
- IP55 Standard Transmitter
- Supply 12/24V DC
- Receiver dimensions 160mm x 160mm x 81mm
Wireless radio control system for controlling 2 functions, for example on/off, winch cable in/out.
SYSTEM CONTENTS
1 x Standard Transmitter
1 x Lo-Cover
1 x Lanyard
1 x Receiver with Wiring Harness and Glands
1 x Instructions
STANDARD TRANSMITTER SPECIFICATION
SWITCH
Type Tactile Dome
BATTERY
Type 9V Alkaline Manganese (GP 1604A - JIS 6LF22 - IEC 6LF22 - Eveready 522 - Duracell MN1604)
CURRENT DRAW
Quiescent 15 micro amps
Operating 20 milliamps
PROTECTION
IP Rating 55
Registration codes Over 16 million
PERFORMANCE
Temp Range -10o C to + 40o C (13o F to + 104o F)
Range Nominal 60 metres (200 ft) from the Receiver, when driving a momentary output without signal drop out
Transmitted power 1 mW Typical
COMPLIANCE
EMC Exceeds ETSI 300 220. Compliant E11 10R-037601
Modulation FM
Frequencies 418.00 MHz F1D USA (optional UK)
433.92 MHz F1D World wide (optional USA)
RECEIVER SPECIFICATION
SWITCH TYPE
Output Switching MOS Field Effect Transistor (P Channel Power MOSFET)
SUPPLY VOLTS
Nominal 12/24 Volts DC
Absolute Maximum 40 Volts DC
Minimum 8 Volts DC
Output Switch Supply Internal 12/24 Volts
AMPS
FET Rating 15 Amps
System Rating 15 Amps
Quiescent Current 25 mA on Standby (Not SET)
Overload Protection 15 Amps (Auto Shutdown)
AERIAL
Internal Antenna Yes Supplied and fitted
External Antenna Optional See Accessories.
OUTPUTS
Function 2 Supply to Receiver is switched
CONFIGURATION
RS232 Programming Yes Not all models, see Build Specification Table. For programming interlocks, push/push latch,
to users requirements parallel master inhibit, timeout, channel timeout delay, master on delay, radio button de-
latching and output allocation.
PERFORMANCE
Simultaneous Outputs Yes With horizontal interlocks (Interlocks are programmable - see CONFIGURATION above)
Instant TX response Yes No perceivable delay between TX operation and RX action
DIAGNOSTICS
LED's Yes Confirm 5 Volts, SET, Fault and all Outputs.
PROTECTION
ESR Safety Yes See ESR Safety document.
Back EMF Yes Diode protected on all outputs
Registration codes Yes Over 16 million
STOP Connection Yes Internal Emergency Stop Connection. Not all models, see Build Specification Table.
WIRING
Wiring Loom Yes 3 metres (10ft) supplied and fitted
Cable Gland Yes Supplied and fitted
Connections Screw terminal into plug and socket on PCB, for easy "swap out"
ENCLOSURE
Weight 0.3 lbs (335gms)
Lid Clear PVC - to view LEDs
Base Black PVC
Breather Gortex fitted in base
Mounting 4 external lugs
Fixings 5mm (3/16") not supplied
IP Rating Performs to IP67 standard
(0.5 metre water for 1 hour)
UK Manufactured. Including next working day delivery to UK
Mainland Via Next Day Carrier. For Offshore please email and we will check
latest rates.
You can add more items to your order from our shop
and get them carriage paid.
About Us
We're a genuine UK based company offering quality items made to the latest standard All our webbing lashings are in accordance with BS EN12195-2:2001. The BS 5759:1987 standard for lashings was withdrawn by BSI on 15th December 2001. The latest publication of standard BS EN12195-2:2001 incorporates amendment 15863 (Corrigendum 1) stating in the national foreword that this standard supersedes BS 5759:1987.Quality management system is to ISO 9001:2015 The ratings under the BS EN12195-2:2001 standards are measured in decanewtons (daN). This is a unit of force rather than weight. For the purposes of this standard: 1.0 kg = 1.0daN. Therefore: 1000daN = 1.0 Tonnes.
Payment
We offer payment by PayPal, Apple Pay, Google Pay and also accept all
major Credit/Debit cards . As soon as payment has arrived we will pack and ship
your goods. Orders placed before 3.00pm will be despatched on a next working
day delivery via DPD or Parcelforce.
Shipping
We take great care packaging every item to ensure safe shipment to you. Our Shipping charges cover our costs of carriage, materials and labour.
Terms
Customers should satisfy themselves that any item choice made is suitable for their intended purpose or use. We pride ourselves on our customer service. In the rare event that you have a problem with your item please contact us and we'll be happy to help.
Returns
Genuinely faulty goods will be replaced or money refunded, however we must be advised of any faulty goods upon receipt of the item.
