Mini Portable Handheld Airbrush Compressor Kit

Kit includes mini portable compressor, dual action, gravity feed 

BARTSHARP 130 airbrush, UK 3 pin plug & USB type charging cable.

BARTSHARP Airbrush is UK based and VAT registered.

The mini compressor has a 1/8BSP (British Standard Pipe approx 9.35 mm in diameter) female outlet which the airbrush screws directly into. There is no requirement to overtighten the airbrush as the compressor outlet has an internal o ring which forms an airtight seal.

The BARTSHARP Airbrush 130 is dual action (press down for air and pull back for release of paint) and gravity fed and fitted with a 0.3mm needle / nozzle and nozzle cap.

(0.2mm and 0.5mm needle/nozzle/nozzle cap sets can also be fitted and are available from BARTSHARP Airbrush) 

The paint cup holds 9cc of medium and has a push fit lid.

The mini airbrush compressors has three switch actions:

1. High Air Flow

2. Low Air Flow

3. Off

After 5 minutes the unit automatically switches off.

Working air pressures is 2 - 11 PSI

The unit takes 2.5 hours to fully charge and is fitted with a 3.7v / 1000Ah battery. 

(It is not possible to use the compressor whilst it is being charged)

Charging is completed using the included USB type cable and 3 pin UK plug adaptor. Connection to the compressor is via an inlet jack port which has a rubber cover for when the unit is not being charged.

A flashing light indicates when the compressor requires charging. 

Once fully charged the same light remains constantly on.

(Average use time is approximately 30 minutes)

The compressor is ideal for use with:

Model Spray Paint

Make-up

Face Paint

Cake / Food Dye

All mediums must be suitably thinned so as to not cause poor flow or blockages.

(Medium should be the consistency of non skimmed milk)

One Year Warranty