Lens Board for Fatif 4x5 5x7 all sizes Copal Compur Ilex
This is a High quality 3D Printed Lens Board available in all sizes. The lens board is light-tight and has bees tested on a camera. The material used is PETG, one of the strongest 3D printing material with high temperature and mechanical resistance. I especially use only HIGH QUALITY filament made it Italy. This material is NOT biodegradable and will last a lifetime with a normal use. There are small imperfection do to the 3d printing process but this is one of the highest print quality available. All my items are painted with opaque black to prevent any light passing through.
Material: PETG plastic
Temperature resistance: 80 ° C
I always work to improve the quality of my items, the design of lens board you'll receive may vary slightly from what you see in the pictures.
Special Design With reinforcement for better stiffness
This lens board is suitable for Fatif Camera
The Linhof Adapter have velvet on the sides to prevent any light leaks
The lens board with a large hole have extra reinforcement for more stiffness
Send me a message for custom hole sizes before placing the order
You will receive:
1x lens board
| Brand | # Size | Hole Size - mm | Hole Size - Inches | Nearest fractional size | Comments, lenses |
| Compur | # 00 | 26.3mm | | | |
| | # 0 | 34.6mm | 1,362 " | 1 3/8 "= 1.375" | |
| | # 1 | 41.6mm | 1,638 " | 1 5/8 "= 1.625 | |
| | #2 | 52.5mm | | | oddball |
| | # 3 | 65mm | 2,559 " | 2 1/2 " | |
| | | | | | |
| Copal | # 0 | 34.6mm | 1,362 " | 1 3/8 "= 1.375" | |
| | # 1 | 41.6mm | 1,638 " | 1 5/8 "= 1.625 | |
| | # 3 | 65mm | 2,559 " | 2 1/2 " | |
| | | | | | |
| Ilex | # 3 | 50.42mm | 1.985 " | 1 7/8 "= 1.875" | Kodak 10 "Comm Ektar f / 6.3 |
| | # 3 dial set | | 1.985 " | | |
| | # 4 | 66.14mm | 2,604 " | 2 5/8 "= 2.625" | Kodak 12 "Comm Ektar f / 6.3 |
| | # 4 dial set | | 2,604 " | | |
| | # 5 | 85.47mm | 3,365 " | 3 3/8 "= 3.375" | Kodak 14 "Comm Ektar f / 6.3 |
| | | | | | |
| Prontor | # 0 | 34.6mm | | | |
| | # 1 | 41.6mm | | | |
| | # 3 | 65mm | | |
The camera is for demonstration only.
Check my shop for more large format photography items
Feel free to contact me for any question
This is a High quality 3D Printed Lens Board available in all sizes. The lens board is light-tight and has bees tested on a camera. The material used is PETG, one of the strongest 3D printing material with high temperature and mechanical resistance. I especially use only HIGH QUALITY filament made it Italy. This material is NOT biodegradable and will last a lifetime with a normal use. There are small imperfection do to the 3d printing process but this is one of the highest print quality available. All my items are painted with opaque black to prevent any light passing through. I always work to improve the quality of my items, the design of lens board you'll receive may vary slightly from what you see in the pictures. The lens board with a large hole have extra reinforcement for more stif