Lab High Pressure Hydrothermal Reactors Chemical SS304 Autoclave Vessel 22MPa

Product description: 
CF stainless steel simple autoclave is a simple high pressure reactor produced according to customer's requirements according to the functional characteristics of high pressure reactor. It can be placed in electric blast drying oven, constant temperature oil/water bath, low temperature tank and other environment, stainless steel material, can be configured communication terminals with computer , and can be customized volume according to customer needs.

It is suitable for flammable, explosive, high toxic, precious media and chemical media of strong penetration to stir. It is the best no-leak response for petroleum, chemical, organic synthesis, polymer, food and other other process vulcanize ,fluorate, oxidize.


Product introduction: 
1. The reactor body and the cover are made of high quality stainless steel. The kettle body is connected with the flange through the thread. The cover is a flat plate. The two are tightly connected by the main bolts and nuts. 
2. The main sealing port of the autoclave adopat a gasket or a line contact of a tapered or circulator surface. By tightening the main nut, they are pressed against each other to achieve a good sealing effect.When tightening the nut, the angle must be symmetrical several times and tightened gradually. The force should be equal,do not make the cover to tilt to one side.If a gasket seal (tetrafluoro, lu, copper, asbestos pad, etc.) is used, tightening the main nut can achieve a good sealing performance. 


Use and precautions: 
1. The temperature of external heating is recommended not to exceed 350℃, the heating rate is ≤ 5℃/min, the temperature can be controlled by PID temperature control system, the cooling rate is ≤5℃/min. The safety pressure is 22 MPa. 
2. Tighten the screws symmetrically after feeding.When the
reaction is completed, the kettle body is naturally cooled to room temperature,and then open the cover. 
3. Do not fill more than 80% in the kettle. 


CF stainless steel simple autoclave is a simple high pressure reactor produced according to customer's requirements according to the functional characteristics of high pressure reactor. It can be placed in electric blast drying oven, constant temperature oil/water bath, low temperature tank and other environment, stainless steel material, can be configured communication terminals with computer , and can be customized volume according to customer needs.

Stainless steel simple kettle

Simple Stainless Steel High Pressure Reactor

Seismic pressure gauges for the environment places severe vibration,the pulse of media tolerance,and the impact of a sudden unloading,gauges clear instructions and stability,with good vibration resistance.

High pressure and high TEMP
High temperature and high pressure simple kettle supporting products

Use and precautions

 

  1. The temperature of external heating is recommended not to exceed 350℃, the heating rate is ≤ 5℃/min, the temperature can be controlled by PID temperature control system, the cooling rate is ≤5℃/min. The safety pressure is 22 MPa.
  2. Tighten the screws symmetrically after feeding.When the reaction is completed, the kettle body is naturally cooled to room temperature,and then open the cover.
  3. Do not fill more than 80% in the kettle.
  4. Remark:Big capacity can be customized according to customers' demands.

 

The reacter prpdouct parameters
  • Payment should be completed within 4 (Four) days of auction closing. Or unpaid dispute will be filed for closing auction.
  • We will leave a positive feedback immediately after payment is received. We appreciate a positive feedback as much as you do. If for some reason there is any issue with the purchase, please contact us prior to leaving feedback, we will be glad to work together and provide a satisfying solution.
  • We only ship the item to the eBay Verified address that is sent to us at the time of checkout, most shipment will be shipped within 1-5 business day. Please verify the correct shipping address in your eBay account before making your payment. Shipping time during holidays may take longer than normal. 
  • Any brokerage, customs, and duty fees associated with international shipments are the customer's responsibility and are not included in our shipping charges. 
  • If you are located outside of the continental 48 United States, please email us in advance to see if the specific item ships to your location. These orders are generally shipped within 1-5 days after payment is received. 
  • Please be patient as they are often subject to additional inspection upon delivery.
  • All of our items are backed with a 30-day return policy. We ensure all our items are new and in excellent condition prior to shipping. In case you receive the item that is not to the standards above, please contact us via e-Bay messages. All returns must be in new original condition as received and should be shipped with delivery confirmation
  • Please note that all returns must be pre-approved by us. Unauthorized returns will not be accepted. If you need to return, please check twice to confirm the item not work and contact our customer service representative, let us know the detailed problem and send us some pictures for confirmation.
  • We ONLY accept returns with original package. Please make sure that item has NO man-made sabotage. Used items will not be accepted for return.
  • We are a comprehensive company specializing in the research and development, production and sales of lab related equipment. Company tenet: Respect reputation and contract, provide high-quality and low-cost equipment for serve scientific research.
  • We believe that it is our vision and mission to provide innovative products with best service and competitive price to satisfy you. Our goal is to make sure that you can find exactly what you are looking for and make it easy for you to place your orders.
  • Email Customer Support:
  • 9:00am-2:00am PST Sunday-Friday
  • All emails will be responded to within 12-24 hours
BrandMTST
MPNDoes Not Apply
Reactor TypeHigh Pressure/Autoclave Reactor
ModelCF-0.025/2
Intended Use/DisciplinePhysical Laboratory
Country/Region of ManufactureChina
CertificationCE ISO
Heating TypeHeat Conduction Oil Heating
WarrantyOne Year
Designed Pressure0-22MPa
MaterialSS304
Capacity(ml)25-2000
Design temperature350℃ (380℃ optional)