Polyethersulfone (PES) Syringe Filters,0.22μm, 33mm, for Sterile Filtration,Sterile Individually Packed
Product features
• Prefilter syringe filter provides two times greater throughput than standard filter without pre-filtration.
• Sterile syringe filter is 100% integrity tested.
• Both for mechanical and tensile high level of strength.
• Used for most mid-polar liquids and organic solvents.
• Low level extractable makes them suitable for environment analysis,proteins and extractables.
• High level flow rate because of symmetric structure.
| Specification | |
| Product Type | PES Syringe Filters |
| Membrane | Polyethersulfone (PES) |
| Housing Material | PP |
| Primary Color | Green |
| Primary Material | Polypropylene |
| Wettability | Hydrophilic |
| Pore Size | 0.22μm |
| Filter Diameter | 33mm |
| Sterile | Yes |
| Non-pyrogenic | Yes |
| RNase/DNase Free | Yes |
| Sample Volume | 100mL |
| pH Range | 1-14 pH |
| Flow Rate | 120-146ml/min (10 psi, 25℃) |
| Filtration Area | 4.9cm2 |
| Hold-up Volume (µL) | <110μL |
| Maximum Operating Pressure | 87 psi |
| Inlet Connection | Female Luer Lock |
| Outlet Connection | Male Luer Slip |
| Application 1 | Buffer & Media |
| Application 2 | Sterile Filtration |
| Sample Types | Aqueous、Solvents and harsh liquids according to chemical compatibility |
| Pack Description | Individual |
| Case Quantity | 10 |
Package list:
10pcs Sterile Syringe Filters PES Membrane
50pcs Sterile Syringe Filters PES Membrane
100pcs Sterile Syringe Filters PES Membrane
How to use a syringe filter?
Choose the right type of membrane material based on the properties of your sample. Be careful of the chemical compatibility to avoid extractables and leachables. Read this article about How to choose a syringe filter.
1. Load the sample into the syringe.
2. Attach the filter to the luer-lock of the syringe with a twisting motion. Make sure it is securely attached.
3. Filter the sample. Hold the syringe and filter vertically, and gently press the plunger to push the sample through the filter. Take care not to apply too much force or you may damage the filter.
4. Discard the used filter and repeat for the next sample.
