Shipping from the nearest USA warehouse. And please understand sometimes we ship from USA warehouse at other states if the nearest warehouse is not available.
Please check if the part number, Fitment Model and Listed Pictures above fit your need or not before placing your orders.
Contact us freely, if you have any question or problem. We will back to you within 1 business day.
Please use the Ctrl+F to search the Part Number / Models that you need.
If you want to buy a set of 4 sensors, please go on this link: https://www.ebay.com/itm/334065323268
Description:
✅ 100% Brand New & High Quality
✅ Tested and Works before shipping.
Specification:
✅ Frequency: 315 MHz
✅ Battery Life: ABOUT 5 YEAR
△ The Tire Pressure Sensor is 100% new and come pre-programmed specifically for your make/model/year of vehicle, need activate them by scan tool or "re-learning". Right Activation tool is important.
△ Scan Tool is not included.
△ We sincerely recommend you go to find professionals to scan and install for avoiding any loss by accident.
△ You will receive 4pcs sensors. If not, or defective, please don’t hesitate to contact us, we will help you.
🔄Interchange Part Number:
42753-STK-A04 / 42753STKA04
42753-STK-A03 / 42753STKA03
42753-STK-A02 / 42753STKA02
42753-STK-A01 / 42753STKA01
42753-TL2-A52 / 42753TL2A52
42753-TL2-A51 / 42753TL2A51
PMV-107G / PMV107G
❗NOTE:❗
❗❗❗ Warning ❗❗❗
-- This is Non-Original Aftermarket TPMS, Please refer to compatibility chart for details. And confirm the Part number and compare with your old parts before purchase.
-- If you are not sure, please message us with your 17-digit VIN # (vehicle identification number) before buying to avoid unnecessary return!
Fitment:
Acura MDX 2007-2013
Acura RDX 2007-2014
Acura TSX 2007-2014
Honda Pilot 2009-2015
Package includes (as pictured):
1x TPMS Tire Pressure Monitor Sensor
Installation Process -- For Reference Only
1. Loosen the tire: Remove the valve cap and core and deflate the tire.
2. Dismount the tire: Clamp the tire onto the tire changer, and adjust the valve at 1 o’clock relative to the tire separation head. Insert the tire tool and lift the tire bead onto the mounting head to discount the head.
3. Dismount the sensor: With a screwdriver remove the fastening screw and sensor from the Valve stem, then loosen the nut and remove the valve.
4. Mount sensor and valve: Slide the valve stem through the valve hole of the rim. Tighten the screw-nut with 4.0 Nm with the help of the positioning pin. Assemble the sensor body against the rim and tighten the screw.
5. Mount the tire: Place the tire on the rim, making sure that the valve faces the separation head at an angle of 180 degrees. Mount the tire over the rim.
