This UVC LED drinking water faucet module can be used along with with most under sink reverse osmosis (RO) or other water filters that comes with its own faucet, adding an extra layer of protection to your drinking water. It is perfect for 800GPD and below RO systems. Tested by third party organizations, the LED disinfection kills 99.99% of bacterias and virus like E. Coli, H1N1, etc.  The indicator on the module will give you the peace of mind about the working status of the disinfection, which will function only when water is running through, promising a long lasting life of usage. The disinfection is instantly working at its full efficacy when it is turn on, due to the benefit of using LED lights instead of traditional mercury light. 

This module can be used as a pretreatment of a family RO system to prevent the expensive biofouling out of bacteria growth on the RO membrane.

When used for sap disinfection, this unit can be combined with a pump to run all your raw sap through to preserve the quality and flavor. It can disinfect 765 gallons of sap per day, easily covering majority of light sap productions. It can be easily set up and wrapped up with its push-in quick connectors.

Features:
Highly effective disinfection: tested by third party organizations, the LED disinfection kills 99.99% of bacterias and virus like E. Coli, H1N1, etc.
Long lasting lifeAssume using it for 10 minutes every day (only counting the time you turn on the drinking faucet), and considering the more than one thousand hours of 50% UV LED life, it can last many years before need for replacement for a family of four.
Working indicator: The indicator on the module gives you the peace of mind to know when disinfection is working or when it needs attention.
Instant protection: LED light will deliver full efficacy at the first moment, fully safeguarding your health every seconds you are using it.
Flow controlled switch: The UVC LED light will only be turned on when water is running through, saving energy and giving a long lasting life of use.

Specification:
Size:     400x145x40mm
UVC Intensity: 100 mW
UV Wavelength: 265nm
Rated Disinfection Water Volume: 180,000L/47,500G
Flow Rate:    2LPM/0.53GPM/765GPD
Storage Temperature: 14-176°F
Operating Temperature:  34-113°F
Inlet Water Temperature:  34-113°F
Max Water Pressure: 1.0 MPa/145 PSI
Outlet Connection (to faucet): 3/8" push-in connector
Rated Power: 6W
Input Voltage: 16V DC
Stanby Power: 0.1mW

What's included:
UVC module x 1
Power adapter x 1
Non-trace sticker x 1
Bracket x 1
Screw x 2
Connector x 2
Lock clips x 2
Instruction manual x 1

Warranty:
1 year if UVC LED fails when the unit is under normal use.

Note:
Direct exposure to UVC is harmful to your skin and eyes, and is known to cause skin cancer and cataracts. Please avoid direct exposure and always wear proper protective equipment when under direct exposure. This unit would not have any exposure of UVC light in proper use. We use best-in-class UVC LED for the disinfection (UVC LED chip made by US company)