• This listing features one pair ( 2 pieces) extremely super bright 7443/7440 pure Red FLASHING high power 23PCS-SMD led bulbs, especially designed for replacing the cars rear turn signal light or brake lights..
  • Big difference between high and low intensity light output( dual filament bulbs), easily noticed while braking or blinking, much safer driving and much more luxury good looking.
  • This bulb is equipped with high quality 48 pieces 4014 SMD and luxury design that will make your cars looks much brighter than halogen or stock lamp,highly recommended.  Most important Note: This bulbs is NOT compatible with CK/SRCK ,it's only fit standard socket type, check it to avoid burn out the fuse.
  • Specification:
  • 2x Flash LED Brake Stop Light Bulbs 7440 7443 Red Color for Honda CR-V 1997-2016

    This listing features one pair ( 2 pieces) extremely super bright 7443/7440 pure Red FLASHING high power 23PCS-SMD led bulbs, especially designed for replacing the cars rear turn signal light or brake lights..

    Big difference between high and low intensity light output( dual filament bulbs), easily noticed while braking or blinking, much safer driving and much more luxury good looking.

    This bulb is equipped with high quality 48 pieces 4014 SMD and luxury design that will make your cars looks much brighter than halogen or stock lamp,highly recommended.

    Most important Note: This bulbs is NOT compatible with CK/SRCK ,it's only fit standard socket type, check it to avoid burn out the fuse.

    Specification:

    • Package: including 2 pieces 7443/7440 LED super bright pure red led bulbs.
    • LED Chips5pcs 3030SMD + 18pcs 4014SMD PER LAMP.
    • Warranty: Full ONE Year guaranteed for manufacturer quality.
    • Color: Brilliant pure red.
    • CANBUS ERROR FREE: No. For some vehicles, it may require install decoder or load resistor to avoid turn signal hyper flash or fast blinking.
    • Cross Reference: 7440, 7441, 7443, 7444NA, 7440LL, 7443LL, 7443-SCK, T20, 7440NA, 7440A, 7440ANK, 7440K, 7444NAPLL,etc.
    • Application: turn signal light, brake tail light, etc.
    • Voltage: 9-16V, bulit in IC driver,much stable current than normal led bulbs in the marker, longer life span.
    • Length: as photo mentioned.
    • Please Note: Please check your car manual or original bulb to confirm the bulb size, length is correct or not before purchasing to save your time.

    Item Specifics
    Brand AUXITO
    Manufacturer Part Number F-Plus-23SMD 7443 LED Blinking RED PAIR
    Interchange Part Number Does Not Apply
    Other Part Number 7444NA, 7443, 7443ST, 7443LL
    Manufacturer Warranty Unspecified Length
    Light Color Red
    Type Strobe Light
    Number of Bulbs 2
    Wattage 50W
    Voltage 12V
    Country/Region of Manufacture China
    Contents of the package 2X 7443 LED Bulbs

    Payment
    • We only accept PayPal payment, should be received within 3 days from the date of purchase.
    • Please keep the consistency of Paypal address and ebay address.
    • Payment should be made within 4 days once you won a item ,or ebay will launch Unpaid Reminder agaist you and there will be bad record on your ebay account .
    • Buyers are responsible for import duties, custom fees and taxes.Please check with your country's custom office to determine the additional costs before you finally make the purchase
    Shipping

    All items will be shipped in 48 hours after receiving your payment.

    Returns
    We offer a 30 day return policy. If you have any questions about the product or want to return it, please contact us within 30 days after receiving the order. The return will be sent after we get your return package.
     
    All returned items should be in the original packaging, and return tracking information should be provided..
     
    The buyer is responsible for the transportation cost of the returned goods, because the problem is not caused by the quality of the project itself.
    Contact Us

    Our office hours are MONDAY-FRIDAY 9:00PM-6:00PM PST, but we will response you once we get your message .There will be some delay on response if you send message or E-Mail on weekend.

    FAQ
    FAQ
     
    Q1: Will this bulb fit my vehicle?
    A: We can match almost any vehicle to one of our bulb sizes. eBay only lets us include partial vehicle fitments per listing, but if your vehicle does not show up on the compatibility table at the top of our listings, welcome you to contact us for free consulation before purchasing a product.
     
    Q2: My item has not arrived, what's taking so long?
    A: Sometimes items take longer than expected, especially if it's going far or to rural area. Check with your post office to see if your item has been held up. Sometimes USPS will not update a tracking number until it has arrived at its destination. If your item still has not arrived after a few days, let us know so we can double check for you and help solve it asap.
     
    Q3: Do I need to mention the Year, Make and Model in the notes when place order?
    A: YES. Please include the Year, Make, and Model in the notes section during checkout to ensure you receive everything needed for your kit!
     
    Q4: My bulbs won't fit, help!
    A: Special bulb holder may be required. See if you can take the holder from the stock bulb. If not, let us know.
    The bulb size may be wrong, double check the item you received with the item you ordered.
    Do you have an aftermarket lighting housing? These may not be perfectly fitted for aftermarket bulbs and will require some manual modifications.
     
    Q5: Neither side lighting up? Both sides flicker, flash, or work inconsistantly.
    A:Check the headlight fuses, and then check the ballast plugs to insure correct installation. If this doesn't work, there may be a voltage problem with the vehicle. You probably just need a relay or capacitor.
     
    Q6: WARNING ABOUT POLARITY
    Unlike halogen bulbs, LEDs are polarity sensitive.
    BEFORE you start your LED kit installation, verify the polarity on your vehicle by simply plugging the LED bulb into your vehicle socket.
    -if your light turns on, please proceed to install both bulbs onto your vehicle.
    -if your light DOES NOT turn on, disconnect the bulb and flip the socket in order to reverse the polarity (this will not damage your vehicle electrical system in any way). Once you made sure the LED bulb turns on, please proceed to install both bulbs onto your vehicle.
    Note: There is no convention when it comes to polarity. Different car manufactures have different polarity setup, even within the car model the polarity setup on your low beams and high beams might be different.

    Shop Category
    Excellent Delivery
    Help & Info
    Payment Policy
    Shipping Policy
    Return Policy
    FAQ
    About Us
    2x Flash LED Brake Stop Light Bulbs 7440 7443 Red Color for Honda CR-V 1997-2016

    This listing features one pair ( 2 pieces) extremely super bright 7443/7440 pure Red FLASHING high power 23PCS-SMD led bulbs, especially designed for replacing the cars rear turn signal light or brake lights..

    Big difference between high and low intensity light output( dual filament bulbs), easily noticed while braking or blinking, much safer driving and much more luxury good looking.

    This bulb is equipped with high quality 48 pieces 4014 SMD and luxury design that will make your cars looks much brighter than halogen or stock lamp,highly recommended.

    Most important Note: This bulbs is NOT compatible with CK/SRCK ,it's only fit standard socket type, check it to avoid burn out the fuse.

    Specification:

    • Package: including 2 pieces 7443/7440 LED super bright pure red led bulbs.
    • LED Chips5pcs 3030SMD + 18pcs 4014SMD PER LAMP.
    • Warranty: Full ONE Year guaranteed for manufacturer quality.
    • Color: Brilliant pure red.
    • CANBUS ERROR FREE: No. For some vehicles, it may require install decoder or load resistor to avoid turn signal hyper flash or fast blinking.
    • Cross Reference: 7440, 7441, 7443, 7444NA, 7440LL, 7443LL, 7443-SCK, T20, 7440NA, 7440A, 7440ANK, 7440K, 7444NAPLL,etc.
    • Application: turn signal light, brake tail light, etc.
    • Voltage: 9-16V, bulit in IC driver,much stable current than normal led bulbs in the marker, longer life span.
    • Length: as photo mentioned.
    • Please Note: Please check your car manual or original bulb to confirm the bulb size, length is correct or not before purchasing to save your time.

    • We only accept PayPal payment, should be received within 3 days from the date of purchase.
    • Please keep the consistency of Paypal address and ebay address.
    • Payment should be made within 4 days once you won a item ,or ebay will launch Unpaid Reminder agaist you and there will be bad record on your ebay account .
    • Buyers are responsible for import duties, custom fees and taxes.Please check with your country's custom office to determine the additional costs before you finally make the purchase

    All items will be shipped in 48 hours after receiving your payment.

    We offer a 30 day return policy. If you have any questions about the product or want to return it, please contact us within 30 days after receiving the order. The return will be sent after we get your return package.
     
    All returned items should be in the original packaging, and return tracking information should be provided..
     
    The buyer is responsible for the transportation cost of the returned goods, because the problem is not caused by the quality of the project itself.

    Our office hours are MONDAY-FRIDAY 9:00PM-6:00PM PST, but we will response you once we get your message .There will be some delay on response if you send message or E-Mail on weekend.

    FAQ
     
    Q1: Will this bulb fit my vehicle?
    A: We can match almost any vehicle to one of our bulb sizes. eBay only lets us include partial vehicle fitments per listing, but if your vehicle does not show up on the compatibility table at the top of our listings, welcome you to contact us for free consulation before purchasing a product.
     
    Q2: My item has not arrived, what's taking so long?
    A: Sometimes items take longer than expected, especially if it's going far or to rural area. Check with your post office to see if your item has been held up. Sometimes USPS will not update a tracking number until it has arrived at its destination. If your item still has not arrived after a few days, let us know so we can double check for you and help solve it asap.
     
    Q3: Do I need to mention the Year, Make and Model in the notes when place order?
    A: YES. Please include the Year, Make, and Model in the notes section during checkout to ensure you receive everything needed for your kit!
     
    Q4: My bulbs won't fit, help!
    A: Special bulb holder may be required. See if you can take the holder from the stock bulb. If not, let us know.
    The bulb size may be wrong, double check the item you received with the item you ordered.
    Do you have an aftermarket lighting housing? These may not be perfectly fitted for aftermarket bulbs and will require some manual modifications.
     
    Q5: Neither side lighting up? Both sides flicker, flash, or work inconsistantly.
    A:Check the headlight fuses, and then check the ballast plugs to insure correct installation. If this doesn't work, there may be a voltage problem with the vehicle. You probably just need a relay or capacitor.
     
    Q6: WARNING ABOUT POLARITY
    Unlike halogen bulbs, LEDs are polarity sensitive.
    BEFORE you start your LED kit installation, verify the polarity on your vehicle by simply plugging the LED bulb into your vehicle socket.
    -if your light turns on, please proceed to install both bulbs onto your vehicle.
    -if your light DOES NOT turn on, disconnect the bulb and flip the socket in order to reverse the polarity (this will not damage your vehicle electrical system in any way). Once you made sure the LED bulb turns on, please proceed to install both bulbs onto your vehicle.
    Note: There is no convention when it comes to polarity. Different car manufactures have different polarity setup, even within the car model the polarity setup on your low beams and high beams might be different.

    All rights reserved.



    On Mar 2, 2025 at 17:55:39 PST, seller added the following information:

    DataCaciques