Digi Code 5150 Gate Receiver Multicode 300/310MHz 10 Dip Switch 109950 302850

This Digi-Code model 5150 also known as the DC-5150 is a one channel, 12 or 24 volt, F-connector type antenna gate or garage door opener radio receiver that works with all Digi-Code, Multi-Code and Stanley remote controls that have 10 DIP type code switches on 300Mhz or 310Mhz. This radio receiver features auto voltage sensing for 12 or 24 volt AC or DC systems and can work on Multi-Code 300MHz or Stanley 310MHz frequencies by changing an internal jumper. The Digi-Code 5150 receiver can control one garage door opener or gate motor and can be used as a replacement or upgrade of older radio receivers. Having an F-connector type antenna allows for the  antenna to be remotely located from the receiver using the optional Digi-Code 5166 remote antenna kit (sold separately) to obtain maximum receiver range especially if the receiver is located inside a metal enclosure that would block the remotes signal. This is a brand new item that comes in a plain white dealer box. Includes 8" wire antenna and programming instructions.

Replaces Multi-Code 109930, 109940, Stanley 109931.

PLEASE NOTE: This radio receiver is a Multi-Code brand name radio receiver and is not a universal type of radio receiver.

The Digi-Code 5150 radio receiver is directly compatible with the following model remotes to control one device:

• Challenger: MC1010, MC1020, MC4210, MC4220.

• Carper: CX-300

• Digi Code: 5010, 5060, 5030, 5040, 5070.

• Heddolf: M219, M220.

• Multi-Code: 1083, 3060, 3070, 3083, 3089, 4120, 4140.

• Multi Elmac: 3089.

• Chamberlain: 300MC.

Not all compatible models may be listed

Product Features:

• Activates one gate or garage door opener

• Dual frequency can be set to either 300MHz or 310MHz mode by internal jumper

• Auto voltage sensing no jumper needed to set operating voltage

• Ideal for use on gate openers

• Optional remote antenna mounting kit for maximum range sold separately

• One-Year manufactures warranty

Product Specifications:

• Power: 12-30 Volts AC or 10.5-30 Volts DC

• Frequency: 300MHz or 310 MHz jumper selectable

• Contacts: One N/O rated at 1 Amp 30 Volts

• Codes: 1,024 (set by 10 dip code switches)

• Dimensions: 5.5 x 4.5 x 1.5 inches

Compatible with all MultiCode Stanley Linear 300/310MHz 10 Dip Switches