128x64 OLED Screen I2C White/Blue/Yellow 0.96" 1.3" inch Display Module SSD1306
OLED Display Module
Specifications
Size: 0.96 inch
Resolution: 128 x 64
Controlling Chip: SSD1306
Display Area: 21.74 x 10.86mm
Driving Voltage: 3.3 - 5V
Operating Temperature: -40~70oC
Interface Type: I2C
Viewing Angle: >160degrees
Colour: White / Blue / Yellow-Blue
Pin Definition
1. GND: power ground
2. VCC: 3.3-5V
3. SCL: clock wire
4. SDA: data wire
I2C Address
0x3C
1.3” OLED 128 x 64
Specifications
Pin Definition
I2C Address
Please Note
Text in picture is NOT displayed on the actual screen, resolution is 128 x 64 and colour as per selection
All screens are compatible with the SSD1106 driver - EXCEPT the 1.3" white screens which use the SSD1306 chipsets (need to use the SSD1306 driver in this case)
1.3" OLED's have VCC and GND pins that can be swapped around using two resistors on the back (NB this is different to the 0.96") - if you prefer
I2C address is fixed and cannot be changed
PCB is black which gives a more discrete finish than standard blue PCB's
- Size: 1.3 inch
- Resolution: 128 x 64
- Driver IC: SSD1106
- Display Area: 29.42 x 14.7mm
- Driving Voltage: 3.3 - 5V
- Operating Temperature: -40~70oC
- Interface Type: I2C
- Viewing Angle: >160degrees
- Colour: White
- Backlight: OLED self light, no backlight
- Communication: IIC, only two I / O ports
Pin Definition
- 1. VCC: 3.3-5V
- 2. GND: Ground
- 3. SCL: clock wire
- 4. SDA: data wire
I2C Address
- 0x3C
Please Note
Text in picture is NOT displayed on the actual screen, resolution is 128 x 64 and colour as per selection
All screens are compatible with the SSD1106 driver - EXCEPT the 1.3" white screens which use the SSD1306 chipsets (need to use the SSD1306 driver in this case)
1.3" OLED's have VCC and GND pins that can be swapped around using two resistors on the back (NB this is different to the 0.96") - if you prefer
I2C address is fixed and cannot be changed
PCB is black which gives a more discrete finish than standard blue PCB's
