Description:
- 【95%+ TDS Removal Rate】SimPure high-efficiency RO Filter removes contaminants 0.0001 microns or greater in diamete. This tankless ro water filter system is equipped with SimPure special reverse osmosis membrane, so the TDS Removal Rate can reach up to 95%+. If the TDS of your tap water is between 0-200ppm, the filtered water will be close to 0ppm. If the TDS is between 200-500ppm, the filtered water will be below 25ppm. And If the TDS is between 500-1000ppm, the TDS removal rate can also reach 90%+. If the TDS is >1000ppm, then we recommend you buy the pre-filter to pretreat the water, otherwise the large particles in the water are easy to block the filter element.
- 【400 GPD & 1.5:1 Pure to Drain Ratio】WP2-400 offers faster flow-400 gallons per day with lower waste 1.5:1 pure to drain ratio, which will save your water bills. Great for household and light commercial in Restaurants, Salons, Labs, and Offices all benefit in their ways from high-quality RO water.
- 【Water Purifier】Use no chemicals and emits absolutely no by-products, SimPure purification system combined with 4-Larger filters RO Filtration System, can make water purification to another level. Removing chlorine, particles such as sand, dirt, silt, iron and rust particles, taste from water
- 【RO System With Booster Pump】With a booster pump, you will never worry for low water pressure, it will easily booster your water pressure to the optimal level and run the RO system more efficiently, producing the purified water fater. Meanwhile, saving at least 50% more waste water than a traditional RO system without a booster pump.
- 【Tankless Design】SimPure WP2-400 adopts tankless design, which can save up to 70% of your under sink space. It will be much easier and more convenient to install, ready to use within 30 minutes. Also you can get rid of the water tank, avoid the secondary pollution. It supplies you 24/7 fast and stable flow purified water, never need to wait.
- 【Upgrade Stainless Steel Panel】With stainless steel panel, protect your machine from corrosion and damp, Anti-friction, waterproof, oil-proof.
- 【SERVING USA SINCE 2006】Seattle, WA USA, SimPure dedicated in providing world-class quality of water filtration solutions. If you are not satisfied with your purchase, then we want to hear from you. Please contact our trained water specialists. And is available to answer any questions during the life of the product.
| Model | WP2-400 | Product Weight | 17.6 Ib |
Feed Water Pressure | 15 - 70 PSI | Water Flow | 0.28 Gallons Per Minute, 400 Gallon Per Day |
| Feed Water Temperature | 41-100℉ / 5-38℃ | Running Noise | ≤48dB (Measure around 40 inches from the machine) |
Feed Water Type | Municipal potable/tap water or well water meeting government drinking water standards (TDS≤500 ppm) | ||
Rated Power Rated Voltage | 62W AC 110 Volts / 60HZ | Filter Service Life | PP Filter (Over 3-6 months), CTO Filter (Over 3-6 months), RO Filter (Over 12-24 months), T33 Filter (Over 3-6 months) |
| Product Dimensions | 16"L x 9"W x 18"H | Installation | Make sure to turn on the faucet and flush the RO system for 20 minutes after completing installation. |
1x PP filter cartridge
1x CTO filter cartridge
1x RO filter cartridge
1x T33 filter cartridge
SUS304 stainless steel faucet
PE Tubing (White, Blue, Red)
Drain saddle
Faucet adaptor ¼" tube QC
Feedwater valve 9/16"
Spare parts kit
Frequently Asked Questions
Q: The system cannot be powered on after you insert the power plug.
A: Check the power under the sink, as this occurs primarily when the power under the sink is powered off. Also check the connection betwen the power plug and the power outlet to ensure that the system has been correctly plugged into the power outlet. To test whether there is a problem with the system itself, simply pick up the system and try another power outlet.
Q: No output water from the faucet.
A1: Water supply is off:Turn on the feed water adapter or water supply valve.
A2: Incorrect filter installation:Reinstall the filter and make sure each filter cartridge is installed in the correct location.
A3: A tubing is crimped:Check all the tubing and remove any crimps.
Q: Low water flow at the faucet.
A1: A tubing is crimped or there is a leak from the tubing connection:Check to ensure that all tubing is installed correctly and completely.
A2: Low water temperature:Be sure to use it at a temperature of 40-100℉.
A3: Low water pressure:Confirm the water pressure is between 15-60 psi.
A4: The filter cartridge has been clogged: If you are using well water as the source, please ensure that the feed water has been through a pre-filtration system. Otherwise, large particles in the well water will easily clog the filter and shorten the filter life.
Q: Why does black water come out during flushing?
A: It’s normal that black water comes out when flushing. The purpose is to remove carbon powder remaining on the surface of filter materials. You can normally use it after flushing for 5 minutes.
Q: Filtered water from the faucet tastes like tap water.
A1: Incorrect tubing installation:Make sure the drain tubing is not connected to the faucet.
A2: The filter is expired: Replace the T33 filter or RO filter cartridge.
Q: What should I do if the system is leaking.
A: Check all the joints, filttings, and tubing connections to locate the leakage. Make sure the cartridges are well installed.Turn off shut off valve, then solve it.
