eBay

Description

Features

All modifications must be installed by licensed mechanics and in compliance with your local modification regulations

Notice:

Pick up service is not available.

Introduction
MXR-B3 based on MXR-B2 coilovers, which is also height adjustable but adds damping adjustment ability by a knob the top of the shaft. They are also made for street use, but the 24 level rebound damping control allows you the ability to perfectly dial in your coilover setup. You will experience better ride quality in all road conditions.

Application

For Holden Commodore Third generation 1997-2007
For Holden Commodore VT / VT II Sedan Wagon 1997-2000
For Holden VX Commodore Berlina Calais Sedan Wagon 2000-2002
For Holden VY Commodore Sedan Wagon 2002-2004
For Holden VZ Commodore Sedan Wagon 2004-2007

Important Note:

1. Don't fit for Ute model
2. Don't fit for Holden VR/VU/ Ute/ SV6/ SV8
3. Don't fit for Holden 3.8L 6cyl 152kW L36(231CUV6)
4. Don't fit for VZ 3.6L, 3.8L V6 Model, including SV6, SV8, Executive model
5. For VT II , VX I series and some VZ, where the drop link connect to the suspension have different style, please check before place an order

Specification

Height adjustable: Yes, lowering 25-75mm depending on the vehicle models

Damping adjustable: Available, 24 levels of rebound damping force

Top mounts: Rear OE top mounts required

Camber adjustable: Not available

Spring Rate Rear: 13 kg/mm (728 lbs/in)

Rear spring inner diameter: 54.5-65 mm

Spring length Rear: 160 mm

Spring Preload advised: 7-10 mm

Shock Type: Twin tube

Package included
2x Rear coil-overs
2x C spanners

Dimension
Package dimension :74*26*20 cm
Package weight: 13250 g

Feature

1. Lowered height adjustment from 25-75mm (depends on vehicle models) which allows a lower center of gravity and also adds a more aggressive stance
2.24 levels of adjustable damper -- This allows you the ability to perfectly dial in your coil-overs system. For nice comfortable driving, set damping to full soft. For more spirited driving, set it to 16 clicks. For occasional track days, set it to full stiff.
3. Adjustable pre-load spring tension to reduce the shaking motion to a certain extent
4. CNC machined Aluminum top mounts and lockers-- - excellent strength, and save weight
5. Heavy Duty Steel Lower Mounts--- Highly Durable & Reliable
6. High tensile spring--- 600,000 times continuously test to assure its high tensile strength.
7. All inserts come with fitted long rubber boots--- To protect the damper better and be durable.
8. Twin-Tube structure ---provides excellent handling & control characteristics for most driving conditions
9. Corrosion Finish - Anodized Aluminum And Powder Coated Carbon Steel Parts