Brand new Webasto Wallbox Pure Black 11 kW - charging station / charger for electric vehicles / EV - Typ 2 / Type2 / Type 2 Plug

 

Brand: Webasto

Part number: 5110461A (Older version 5110316A)

Reference: 5GE054400

Weight: 5.6 kg

Dimensions with mounting frame L x W x H: 437mm x 225mm x 107mm

 

Suitable for all electric cars and plug-in hybrids with type 2 plug (Leaf, Tesla, PRsius) e-Golf, Opel Ampera, Volt, Zoe, etc, 

Suitable for inside and outside

Faster charging: Up to 5x

Highest Electrical Safety Standards 

Integrated monitor for error code readings

Adjustable charging power from 1st phase 16 A 3.7 kW to 1st phase 32A 7.2 kW and 3rd phase 16A 11 kW

Electrical enclosure IP54 and IK07 for outdoor installation

Manufactured by Webasto and Made in Germany

 

Please Note! In Germany, 1st-phase 32 A is regulated down to 20 A due to the unbalanced load regulation. Therefore, 1st-phase instead of 7.2 kW only 4.6 kW are possible.

In 3rd-phase does not apply unbalanced load regulation.

  

The minimum cross-section for a standard installation is 5 x 2.5 mm2 (for 16 A) and 5 x 6 mm2 (for 32 A), depending on the cable and the type of installation. A FI 30 mA type A is required on site.

The charging power may need to be set lower.

We would highly Ask your network operator or a local specialist / installer

 

Contents of the box:

1 x Webasto Wallbox Pure

4.5 m Type 2 cable (permanently mounted) 

2 x Key switches for charge release

 

Please check before purchasing if an 11-kW system can be installed at your location.

Brand new Webasto Wallbox Pure Black 11 kW - charging station / charger for electric vehicles / EV - Typ 2 / Type2 / Type 2 Plug Suitable for all electric cars and plug-in hybrids with type 2 plug (Leaf, Tesla, PRsius) e-Golf, Opel Ampera, Volt, Zoe, etc,  Adjustable charging power from 1st phase 16 A 3.7 kW to 1st phase 32A 7.2 kW and 3rd phase 16A 11 kW Please Note! In Germany, 1st-phase 32 A is regulated down to 20 A due to the unbalanced load regulation. Therefore, 1st-phase instead of 7.2 kW only 4.6 kW are possible. The minimum cross-section for a standard installation is 5 x 2.5 mm2 (for 16 A) and 5 x 6 mm2 (for 32 A), depending on the cable and the type of installation. A FI 30 mA type A is required on site. Please check before purchasing if an 11-kW system can be installed at your