2* 2.5" SSD to 3.5" SATA adapter Tray Converter 654540-001 SAS HDD Bracket Caddy
Descriptions:
- This adapter can adapts any 2.5" form factor SAS/SATA/SSD Drive to 3.5" form factor drive, without cables or hassles.
- Standard position mounting holes on Adapter's bottom and sides, equivalent to those found on a 3.5" hard drive, give you the flexibility to mount it anywhere a 3.5" drive is used.
- Adapter's fixed mount connectors are attached to a simple circuit board, assuring solid connections between devices, and the outside connector is positioned to plug into a backplane as the tray is inserted.
Note:This adapter is compatible with all the 3.5" SAS/SATA drive caddie trays from HP, Dell, IBM, or other manufacturers, such as HP 651314-001, IBM 69Y5284, or Dell F238F.dell kg1ch.
Specifications:
- Condition:Brand New
- Compatible Part Numbers: 654540-001
- Compatible with 3Gb/s and 6Gb/s SAS/SATA/SSD drives.
- No loss in data transfer speeds—no bridge chip used
- Compatible Drive Type: 2.5" SATA or SAS HDD SSD
- External Interface: SATA(Max. SATA 3.0 6Gbps/Sec)
- Device fit: 3.5" SATA hard hot-swap drive bay
- Structure -- SECC(Steel Electrogalvanized Cold-rolled Coil) Steel body
- Support ALL Server DLL/HP/LENOVO/MAC Machine
- Support ALL 2.5'' HDD to 3.5'' HDD Server Tray
- Dimension: 147mm x 12mm x101mm
HP Proliant Gen8 servers:
HP ProLiant DL 380E G8
HP ProLiant BL420c G8
HP ProLiant DL 388 G8
HP ProLiant BL460c G8
HP ProLiant DL 560 G8
HP ProLiant BL465c G8
HP ProLiant DL160G8
HP ProLiant BL 660c G8
HP ProLiant DL320EG8
HP ProLiant ML310EG8
HP ProLiant DL360EG8
HP ProLiant ML350EG8
HP ProLiant DL360PG8
HP ProLiant ML350PG8
HP ProLiant DL380PG8
HP ProLiant SL230SG8
HP ProLiant DL385PG8
HP ProLiant SL250SG8
HP ProLiant WS460CG
Note: This tray is compatible with all HP Proliant Gen8 servers that use 3.5" SAS/SATA hotswap drives.
Package content :
2 x 2.5" to 3.5" 654540-001 HP caddy adapter
16 x Caddy Mounting Screws
