Silver Bearing Solder Paste 5.2g Low Temperature Jewellery Metal Repair

Silver Bearing Solder Paste – Low Temperature, 5.2g

Complete jewellery, craft and metal repairs with this easy-to-use silver bearing solder paste. The solder and flux are pre-blended in a convenient syringe, providing precise application with less mess and waste.

This low-temperature silver solder paste begins to flow at approximately 430°F (221°C), allowing many soldering jobs to be completed without the higher temperatures required for traditional brazing. It creates strong, electrically conductive joints that resist stress and vibration.

Contents:
5.2g syringe

Flow temperature:
Approximately 430°F (221°C)

Re-melt temperature:
Approximately 650°F (343°C)

Suitable heating tools:

• Butane torch
• Soldering iron
• Propane torch
• Acetylene torch
• MAPP gas torch

Suitable metals include:

• Copper
• Brass and bronze
• Sterling silver
• Nickel and platinum
• Chrome and Monel
• Coated steel, black steel and regular steel
• Cast iron

Features:

• Silver-bearing, low-temperature solder paste
• Solder and flux are pre-blended and ready to use
• Precision syringe helps minimise mess and waste
• Flows smoothly at approximately 430°F (221°C)
• High electrical conductivity
• Stress- and vibration-resistant
• Provides strong joints without high-temperature brazing
• Contains no lead or cadmium

Not suitable for:
Aluminium, magnesium or pot metal.

How to use:
Clean the surfaces thoroughly, apply a small amount of solder paste to the joint and heat evenly until the solder flows. Allow the piece to cool completely before handling or cleaning.

Use only in a well-ventilated workspace and follow appropriate soldering and heat-safety precautions. The quality of the finished joint will depend on correct surface preparation, application and heating.

Silver Bearing Solder Paste – Low Temperature, 5.2g Complete jewellery, craft and metal repairs with this easy-to-use silver bearing solder paste . The solder and flux are pre-blended in a convenient syringe, providing precise application with less mess and waste. This low-temperature silver solder paste begins to flow at approximately 430°F (221°C), allowing many soldering jobs to be completed without the higher temperatures required for traditional brazing. It creates strong, electrically conductive joints that resist stress and vibration. Contents: 5.2g syringe Flow temperature: Approximately 430°F (221°C) Re-melt temperature: Approximately 650°F (343°C) Suitable heating tools: Butane torch Soldering iron Propane torch Acetylene torch MAPP gas torch