Oil Additives - WINDIGO Micro Ceramic Oil 5% 400 ml
Trust the WINDIGO brand and give your vehicle the best care with WINDIGO Micro Ceramic Oil 5%
Micro-Ceramic is applied to the motor or gearbox without disturbing the
technical tolerances, and due to its adhesion to metal, it penetrates into the
metal surfaces and seals the ceramic particles in the roughness areas, which
creates an armor-plating effect and forms a very strong protective film on the
metal surfaces. Due to the high thermal resistance and the chemical properties
of Micro-Ceramic, the possibility of deposits, build-ups and clots and thus
negative effects on units and rubber seals that come into contact with
Micro-Ceramic are avoided. The content of micro ceramic particles in the product
is such that when Micro-Ceramic is added to standard oils, the particles not
only penetrate the metal surfaces, but also float permanently in the oil,
acting like small balls in a ball bearing. In this way, we get ideal sliding
properties because it is not metal on metal, but ceramic on ceramic (softening
effect), resulting in a soft running, reduced vibration and noise."
Universal Micro-Ceramic Oil is a selected combination of the most modern
high-tech solid ceramic lubricants.
• Reduces friction and reduced fuel consumption
• Reduces wear, increasing service life
• Improves engine power
• Reduces engine and gear noise
• Lessens oil consumption
• Reduces emissions
• Excellent emergency running properties, lower engine and gear temperature
• Smoother switching operations and reduced operational costs
It is applied for:
• Gasoline, diesel, gas engines (is recommended to use in combination with WINDIGO Motor cleaner.)
• Manual transmissions
• Drivetrains, differentials
and transfer cases exposed to intense exploitation
• Engines and wet motorcycle
clutches
Properties:
• Easily passes through all types of oil filters.
• Protection against wear of engine and transmission parts. The wear
rate of parts is reduced by at least 2 times (compared to oil).
• Fuel economy up to 15%.
• Operation over 60,000 km or 1000 hours of operation.
• Increasing engine power, reducing oil consumption, restoring
compression.
• Reduced engine noise. Reduced emissions.
• Improved extreme pressure properties.
• Lower engine oil temperature.
• Increased engine life.
• Reduced overall operating costs.
• Shelf-life Unlimited.
HIGH-CLASS Micro-Ceramic-Oil can be used in standard, mineral, synthetic or semi-synthetic engine and gear oil. Suitable for turbo charged engines and catalytic converters. HIGH-CLASS Mirco-Ceramic Oil should make 4-5% of the total oil volume. Add while engine is hot and continue to run engine 10 mintues after adding HIGH-CLASS Micro-Ceramic Oil. Add Micro-Ceramic after an oil and filter change.
NOT for use with By-pass filters. NOT for use in automatic transmissions.
Instructions for use:
Shake the vial before use
Engines:
1. Prepare new engine oil and oil filter according to recommendations of
car manufacturer.
2. Heat the engine until operating temperature.
3. Add to old engine oil WINDIGO Motor cleaner.
4. Start the engine, keep it working for 15 minutes (up to 30 minutes in
case of severe engine contamination).
5. Stop the engine and pour out old engine oil.
6. Change the oil filter.
7. Shake thoroughly micro ceramic additive WINDIGO and pour it into the
new engine oil, mix carefully.
8. Pour resulted mix into the engine.
9. Start the engine and let it work for 10 minutes (30 minutes for turbo
engines).
10. Proceed with usual car exploitation.
Dosage for use:
• Gasoline, diesel, gas engines - Add 5% of micro ceramic WINDIGO
additive out of the total oil volume.
• Manual transmission - Add 5% of micro ceramic WINDIGO additive out of
the total oil volume.
• Transfer cases, drivetrains, differentials - Add 5% of micro ceramic
WINDIGO additive out of the total oil volume.
400ml per - 8 liters of oil
Package Content
1 x 400ml can of additive
All items are shipped within 24 hours of payment receipt, except on weekends or as mutually agreed.
Items can also be combined to reduce shipping costs.
Shipping costs will be deducted from refunds on returned items, unless
otherwise pre-arranged.
Customs and duty charges (International deliveries)
Deliveries to some countries may incur customs and import related fees
on arrival. Please check with your local authorities, as all additional charges
are the responsibility of the purchaser.
If You have any questions, please contact us.