• Brand NEW Blower Motor For Car
  •  
  •  
  • Features:
  •  
  • Heater Blower Motor with Fan Cage Fits Buick LeSabre Oldsmobile 88 98 88960337

    Brand NEW Blower Motor For Car

     

     

    Features:

     

    • NEW, not remanufacturedor rebuilt
    • DIRECT REPLACEMENT
    • Built to strict quality control standards
    • HIGH QUALITY - Top quality materials which provide maximum strength and durability
    • 1 YEAR WARRANTY-This item is backed by a 1 Year Warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge (excludes shipping charges) for the original purchaser.
    • 100% tested prior to leaving the factory
    • The blower motor can be installed easily with no special tools required and just by removing a few screws under the passenger side dash of your vehicle. Simply remove the old blower motor and put the new one in. It is also a advisable to replace your blower motor relay/resistor with a new one when you replace your blower motor.

     

    What Are Signs Your Blower Motor Needs to Be Replaced?

     

    • Poor or Airflow from Air Vents
    • No Airflow At All From Vents
    • Skyrocketing Energy Bills
    • Strange Noises When You Turn on the Heat
    • Overheating Blower / Weird Smells

     

    Fitting for the following years and models:

     

    • Buick LeSabre 1999-1992
    • Buick Park Avenue 1996-1991
    • Buick Riviera 1993-1986
    • Cadillac DeVille 1993-1991
    • Cadillac Eldorado 1991
    • Cadillac Fleetwood 1993-1991
    • Cadillac Seville 1991
    • Oldsmobile 88 1999-1992
    • Oldsmobile 98 1996-1991
    • Oldsmobile Delta 88 1991-1986
    • Oldsmobile LSS 1999-1996
    • Oldsmobile Regency 1998-1997
    • Oldsmobile Toronado 1992-1991
    • Pontiac Bonneville 1999-1991

     

    Removing the Blower Motor


    Step 1

    Disconnect the ground cable from the negative battery terminal. Loosen the retaining bolt using a wrench. Pull the clamp off the terminal.

     

    Step 2

    Locate the blower motor. On most vehicles, it will be located inside the engine bay along the firewall on the passenger side of the vehicle. On some vehicles, it may be located inside the passenger compartment, below the dash on the passenger side of the vehicle.

     

    Step 3

    Pull the wiring connector or connectors off the blower motor, using your hand. In most cases there will be one plastic connector. If there are more than one, use masking tape and a marker to label them for reassembly,

     

    Step 4

    Using a socket, unscrew the screws that secure the blower motor to the heater case or firewall.

     

    Step 5

    Pull the blower motor and fan blades from the vehicle as an assembly.

     

    Step 6

    Unscrew the nut that secures the fan blades to the motor, using a socket.

     

    Step 7

    Pull the fan blades away from the motor.

     

    Installing the Blower Motor
    Step 1

    Drop the fan blades into position on the new motor.

     

    Step 2
    Screw on the nut that secures the fan blades to the motor.

     

    Step 3
    Slide the motor/fan blade assembly into position in the heater case or firewall.

     

    Step 4
    Screw in the screws that secure the blower motor to the heater case or firewall.

     

    Step 5
    Press the plastic wiring connector onto the back of the blower motor.

     

    Step 6
    Reconnect the ground cable to the negative battery terminal. Slide the clamp over the terminal and tighten the retaining bolt with a wrench.

     

    Step 7
    Test for proper operation.

     

    NOTE:

     

    • Please compare your parts against pictures to ensure this part fits your vehicle
    • Please confirm your old part number matches up with one of the part numbers above
    • Professional installation is highly recommended (No Instruction Included)
    • For any needs please contact us.

    Heater Blower Motor with Fan Cage Fits Buick LeSabre Oldsmobile 88 98 88960337

    Brand NEW Blower Motor For Car

     

     

    Features:

     

    • NEW, not remanufacturedor rebuilt
    • DIRECT REPLACEMENT
    • Built to strict quality control standards
    • HIGH QUALITY - Top quality materials which provide maximum strength and durability
    • 1 YEAR WARRANTY-This item is backed by a 1 Year Warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge (excludes shipping charges) for the original purchaser.
    • 100% tested prior to leaving the factory
    • The blower motor can be installed easily with no special tools required and just by removing a few screws under the passenger side dash of your vehicle. Simply remove the old blower motor and put the new one in. It is also a advisable to replace your blower motor relay/resistor with a new one when you replace your blower motor.

     

    What Are Signs Your Blower Motor Needs to Be Replaced?

     

    • Poor or Airflow from Air Vents
    • No Airflow At All From Vents
    • Skyrocketing Energy Bills
    • Strange Noises When You Turn on the Heat
    • Overheating Blower / Weird Smells

     

    Fitting for the following years and models:

     

    • Buick LeSabre 1999-1992
    • Buick Park Avenue 1996-1991
    • Buick Riviera 1993-1986
    • Cadillac DeVille 1993-1991
    • Cadillac Eldorado 1991
    • Cadillac Fleetwood 1993-1991
    • Cadillac Seville 1991
    • Oldsmobile 88 1999-1992
    • Oldsmobile 98 1996-1991
    • Oldsmobile Delta 88 1991-1986
    • Oldsmobile LSS 1999-1996
    • Oldsmobile Regency 1998-1997
    • Oldsmobile Toronado 1992-1991
    • Pontiac Bonneville 1999-1991

     

    Removing the Blower Motor


    Step 1

    Disconnect the ground cable from the negative battery terminal. Loosen the retaining bolt using a wrench. Pull the clamp off the terminal.

     

    Step 2

    Locate the blower motor. On most vehicles, it will be located inside the engine bay along the firewall on the passenger side of the vehicle. On some vehicles, it may be located inside the passenger compartment, below the dash on the passenger side of the vehicle.

     

    Step 3

    Pull the wiring connector or connectors off the blower motor, using your hand. In most cases there will be one plastic connector. If there are more than one, use masking tape and a marker to label them for reassembly,

     

    Step 4

    Using a socket, unscrew the screws that secure the blower motor to the heater case or firewall.

     

    Step 5

    Pull the blower motor and fan blades from the vehicle as an assembly.

     

    Step 6

    Unscrew the nut that secures the fan blades to the motor, using a socket.

     

    Step 7

    Pull the fan blades away from the motor.

     

    Installing the Blower Motor
    Step 1

    Drop the fan blades into position on the new motor.

     

    Step 2
    Screw on the nut that secures the fan blades to the motor.

     

    Step 3
    Slide the motor/fan blade assembly into position in the heater case or firewall.

     

    Step 4
    Screw in the screws that secure the blower motor to the heater case or firewall.

     

    Step 5
    Press the plastic wiring connector onto the back of the blower motor.

     

    Step 6
    Reconnect the ground cable to the negative battery terminal. Slide the clamp over the terminal and tighten the retaining bolt with a wrench.

     

    Step 7
    Test for proper operation.

     

    NOTE:

     

    • Please compare your parts against pictures to ensure this part fits your vehicle
    • Please confirm your old part number matches up with one of the part numbers above
    • Professional installation is highly recommended (No Instruction Included)
    • For any needs please contact us.



    Shipping

    1. Package handling takes about 2 business days at our warehouse, so please make sure entering correct payment and shipping information before checking out. Once your payment is completed, we are not going to accept any more changes to your order.
    2.All domestic orders will be shipped via USPS, UPS or Fedex from our US warehouse and usually arrives to your door in about 2-7 business days.
    3.Local pick up is not available.
    4.International Buyers C Please Note:
    a. Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyers responsibility.
    b. Please check with your country customs office to determine what these additional costs will be prior to bidding/buying. ]

    Payment

    We accept multiple payment methods

    Payments are expected within 7 days  after the last winning auction is closed; 

    Otherwise Unpaid Item Dispute  will be filed with eBay.

     

    Returns

    We stand behind every product we sell.
    All of our brand new items come with a 30-Days money-back or exchange guarantee.

    Customer Services

    Q: When will the item be shipped out?
    A: This item will be shipped with 2 business day once payment completed.
    Q: Where is my tracking number?
    A: Please log on your account, click "my eBay"-->"my summary", or open your email box and find the shipping notification email.
    Q: How do I return an item?
    A: My tore accepts returns. Items must be returned within 60 days. Refunds will be given as money back. Please contact our customer service before you return an item. ]

    Feedback

    1. We will leave positive feedback once we get your payment. 
    2. If you are dissatisfied for any reason, please do contact us before you leaving a feedback. We will work hard to make sure EVERY CUSTOMER 100% SATISFIED and resolve any problem for you and always leave a feedback to all our customers.
    3. If you are satisfied with the product you received, wish you can leave us a feedback.

    Shop Category
    Picture
    Heater Blower Motor with Fan Cage Fits Buick LeSabre Oldsmobile 88 98 88960337

    Brand NEW Blower Motor For Car

     

     

    Features:

     

    • NEW, not remanufacturedor rebuilt
    • DIRECT REPLACEMENT
    • Built to strict quality control standards
    • HIGH QUALITY - Top quality materials which provide maximum strength and durability
    • 1 YEAR WARRANTY-This item is backed by a 1 Year Warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge (excludes shipping charges) for the original purchaser.
    • 100% tested prior to leaving the factory
    • The blower motor can be installed easily with no special tools required and just by removing a few screws under the passenger side dash of your vehicle. Simply remove the old blower motor and put the new one in. It is also a advisable to replace your blower motor relay/resistor with a new one when you replace your blower motor.

     

    What Are Signs Your Blower Motor Needs to Be Replaced?

     

    • Poor or Airflow from Air Vents
    • No Airflow At All From Vents
    • Skyrocketing Energy Bills
    • Strange Noises When You Turn on the Heat
    • Overheating Blower / Weird Smells

     

    Fitting for the following years and models:

     

    • Buick LeSabre 1999-1992
    • Buick Park Avenue 1996-1991
    • Buick Riviera 1993-1986
    • Cadillac DeVille 1993-1991
    • Cadillac Eldorado 1991
    • Cadillac Fleetwood 1993-1991
    • Cadillac Seville 1991
    • Oldsmobile 88 1999-1992
    • Oldsmobile 98 1996-1991
    • Oldsmobile Delta 88 1991-1986
    • Oldsmobile LSS 1999-1996
    • Oldsmobile Regency 1998-1997
    • Oldsmobile Toronado 1992-1991
    • Pontiac Bonneville 1999-1991

     

    Removing the Blower Motor


    Step 1

    Disconnect the ground cable from the negative battery terminal. Loosen the retaining bolt using a wrench. Pull the clamp off the terminal.

     

    Step 2

    Locate the blower motor. On most vehicles, it will be located inside the engine bay along the firewall on the passenger side of the vehicle. On some vehicles, it may be located inside the passenger compartment, below the dash on the passenger side of the vehicle.

     

    Step 3

    Pull the wiring connector or connectors off the blower motor, using your hand. In most cases there will be one plastic connector. If there are more than one, use masking tape and a marker to label them for reassembly,

     

    Step 4

    Using a socket, unscrew the screws that secure the blower motor to the heater case or firewall.

     

    Step 5

    Pull the blower motor and fan blades from the vehicle as an assembly.

     

    Step 6

    Unscrew the nut that secures the fan blades to the motor, using a socket.

     

    Step 7

    Pull the fan blades away from the motor.

     

    Installing the Blower Motor
    Step 1

    Drop the fan blades into position on the new motor.

     

    Step 2
    Screw on the nut that secures the fan blades to the motor.

     

    Step 3
    Slide the motor/fan blade assembly into position in the heater case or firewall.

     

    Step 4
    Screw in the screws that secure the blower motor to the heater case or firewall.

     

    Step 5
    Press the plastic wiring connector onto the back of the blower motor.

     

    Step 6
    Reconnect the ground cable to the negative battery terminal. Slide the clamp over the terminal and tighten the retaining bolt with a wrench.

     

    Step 7
    Test for proper operation.

     

    NOTE:

     

    • Please compare your parts against pictures to ensure this part fits your vehicle
    • Please confirm your old part number matches up with one of the part numbers above
    • Professional installation is highly recommended (No Instruction Included)
    • For any needs please contact us.


    1. Package handling takes about 2 business days at our warehouse, so please make sure entering correct payment and shipping information before checking out. Once your payment is completed, we are not going to accept any more changes to your order.
    2.All domestic orders will be shipped via USPS, UPS or Fedex from our US warehouse and usually arrives to your door in about 2-7 business days.
    3.Local pick up is not available.
    4.International Buyers C Please Note:
    a. Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyers responsibility.
    b. Please check with your country customs office to determine what these additional costs will be prior to bidding/buying. ]

    We accept multiple payment methods

    Payments are expected within 7 days  after the last winning auction is closed; 

    Otherwise Unpaid Item Dispute  will be filed with eBay.

     

    We stand behind every product we sell.
    All of our brand new items come with a 30-Days money-back or exchange guarantee.

    Q: When will the item be shipped out?
    A: This item will be shipped with 2 business day once payment completed.
    Q: Where is my tracking number?
    A: Please log on your account, click "my eBay"-->"my summary", or open your email box and find the shipping notification email.
    Q: How do I return an item?
    A: My tore accepts returns. Items must be returned within 60 days. Refunds will be given as money back. Please contact our customer service before you return an item. ]

    1. We will leave positive feedback once we get your payment. 
    2. If you are dissatisfied for any reason, please do contact us before you leaving a feedback. We will work hard to make sure EVERY CUSTOMER 100% SATISFIED and resolve any problem for you and always leave a feedback to all our customers.
    3. If you are satisfied with the product you received, wish you can leave us a feedback.