PARKER / DIGIPLAN BLX75 - BRUSHLESS SERVO DRIVE

RS232C COMMAND INTERFACE 6K PROGRAM MEMORY


PRODUCT DETAILS:

Manufacturer's Data:

Features:
• High speed operation
• RS232C command interface
• 1 to 8 devices can be daisy-chained on a single RS232C port using zero delay daisy chaining (ZDDC)
• 6K program memory for storing up to 63 sequences and parameters
• Automatic load and execution of motion programs (sequences) at power up
• Sequence execution can be initiated by external switches, computer, or programmable controller
• Sequence upload, download, and memory verification from the computer, or programmable controller
• Encoder following - the axis follows the encoder of another axis
• Encoder superposition - the motion is the sum of the encoder following input and an internally generated index.
• Optically isolated inputs for Home position, End-of-travel limits, Emergency Stop and jog functions
• 7 optically isolated user-definable inputs
• Programmable resolution
• Analogue outputs for signal monitoring

Specifications:
  • Command Input: RS232C
  • Type: 3-wire (Tx,Rx, Gnd). minimum voltage swing = ±3V
  • Parameters: 9600 baud, 8 data bits, 1 stop bit, no parity
  • Connector: Removable screw terminals
  • Configuration: Up to 8 interfaces can be controlled from a single RS232C port using zero delay daisy chain. Device address set up by jumper links on the board.
  • Operating Ranges: Position ±1to 268, 435, 455 steps; Velocity: 0.0001 to 100 revs/sec; Acceleration: 0.06 to 999,999 revs/sec(2)
  • Maximum Encoder Frequency: 100 kHz (lines/sec before multiplication)
  • Resolution Ranges: Feedback encoder: 1 to 32,767 counts/rev; User-programmed: 1 to 32,767 steps/rev
  • Co-ordinate System: Incremental or absolute
  • Operating Modes: Preset, preset with speed change, continuous
  • Positioner Loop Update Every 2 milliseconds
  • Motion Program Storage: Memory Type: Battery Backed RAM; Memory Capacity: 6400 characters total; Number of Programs: 63; Program Length: Variable up to memory limit; Program Selection: a) Via RS232C, b) Automatic execution at power up, c) Binary address on sequence select inputs
  • Digital Servo Loop: Update Time: 500 microseconds; Servo Tuning: RS232C. values stored in battery-backed RAM. Servo self-tuning facility; Tuning Parameters: PIVF or PID options with digital filter
  • Opto-isolated I/P's: Home, limits, jog ±, emergency stop, 7 user-definable inputs (also used for program selection): - 12-24V on max at 4 mA. 30V off max. Max. reverse voltage -5V
  • Optically-isolated O/P's: 3 user-definable: can also be assigned as watchdog, in position and fault outputs. NPN open-collector, common to isolated ground. 300 mA on max. 30V off max. 2.5V at 300 mA max voltage in the on state.
  • Analogue Monitor O/P's: Velocity and position error ±2.5V relative to interface 0V
  • Power requirements: +5V, derived from the drive module

The following components are included in this sale:
1x Parker / Digiplan BLX75 Servo Drive, as pictured.


Cosmetic Notes:
The interior of this servo drive is in excellent condition, very clean, as pictured. This servo drive is in excellent condition with only a few minor scratches and scuffs on the exterior of the casing. This is purely cosmetic, as pictured.


Testing & Functional Notes:
This item was carefully removed from working equipment however, we have not specifically tested for full functionality however, the Varta V100R 3.6V Ni-Cd Battery (pictured inside) reads as full. It is being sold As is, As pictured, Final sale.  See above for any additional notes.


**For more servo drives and related products, please visit OUR STORE!!**



See Below For Terms & Conditions:

Unless stated otherwise, accessories such as Power Cords, Probes, Software, Batteries, AC Adapters, and/or other Cables etc. are not included.

Payment Methods: 


We reserve the right to restrict payment methods.

11.5 x 10 x 5", 10.05lbs Made in UK EB15 av


GENERAL SALES INFORMATION:

  • We guarantee item condition as stated in the Cosmetic & Testing Notes above
  • All sales are final
  • WYSIWYG What you see is what you get, unless otherwise noted. Please review the pictures & description carefully!
  • Unless otherwise noted, the item(s) you are purchasing are sold "as-is, where-is", with all faults and may be used, damaged or may have missing parts &/or accessories.  Seller expressly disclaims any warranty of merchantability, fitness for a particular purpose.
  • What you pay: Item cost + Insured shipping cost (plus any applicable brokerage, taxes etc. - see below)
  • If your feedback is private please do not purchase from us


    • STORE & PAYMENT POLICIES:

  • Our goal is to ensure that our customers are satisfied.  Please contact us to work out any issues rather than leaving negative feedback.
  • The purchaser MUST contact us within 3 Days after the purchasing the item, and Complete Payment within 5 Days from time of purchase. If NOT paid after this time, the transaction will be cancelled and the purchaser will forfeit ALL rights to the item.
  • The Purchaser will receive an email within 2 business days with totals based on the address that eBay provides.
  • We will send you an eBay invoice, and may send a more detailed one through our TorontoSurplus business mail especially for credit card or wire transfer transactions.  Please check your SPAM folder if you don't see it.
  • Please ensure that we receive your correct address, as well as a phone number
  • We ship 3-5 business days after receiving payment (for most items)

    • We accept:
    Visa, MasterCard, PayPal & Wire Transfer

    We reserve the right to limit payment methods
    Do not send credit card information by email!

    SHIPPING POLICY & DETAILS:


    We use experience-proven shipping materials and packaging techniques. Products may be disassembled prior to shipping as appropriate to ensure their safety and minimize shipping costs.





    • Purchaser pays all shipping, and related expenses, unless it says free shipping.
    • Items may be picked up. Just contact us to make arrangements.  Local taxes, and handling (if applicable) will apply.
    • If you receive a damaged package note any evidence of damage on the freight receipt.  Keep the packaging material, and contact us immediately.

    U.S. buyers:
    This applies ONLY IF the purchase price exceeds $800.00 US & it does not ship by Post.
    (contact us before you purchase, and we can tell you how it will ship).
     
  • A flat rate Customs Broker Fee will be added to your invoice, and FCC Fee where applicable.
  • For items not made in the U.S. or Canada: The buyer will be responsible for paying any applicable Duties, Taxes or Fees that U.S. Customs may apply to the item
  • U.S. Customs requires either an EIN# or Federal Tax I.D.# or SSN for the customs paperwork. This information is kept strictly confidential and is used only on the customs documents

    • If you wish to pick-up you may, but you will have to pay our local tax.


    International buyers:
    Will be responsible for paying any Landing Charges, Duties, and Taxes that Customs may apply to the item.


    Canadian buyers:
    Must pay GST or HST, as applicable
    		SearchBy<#field ItemNumber/> at <#field storeSection/><#attributes><#field AttrName/> <#field AttrValue/> <#/attributes>
    SearchBy<#field ItemNumber/> at <#field storeSection/><#attributes><#field AttrName/> <#field AttrValue/> <#/attributes> SearchBy<#field ItemNumber/> at <#field storeSection/><#attributes><#field AttrName/> <#field AttrValue/> <#/attributes> SearchBy<#field ItemNumber/> at <#field storeSection/><#attributes><#field AttrName/> <#field AttrValue/> <#/attributes>