Sash Window Brush Seal
Self Adhesive Brush seal is the perfect solution for use in the sliding application and for use in traditional grade 2 listed buildings.
The Brush seal provides extra draught resistance on the top and bottom sashes and also the meeting rail, with the high strength self-adhesive backing making application easy.
Self Adhesive Brush seal is the more traditional method of draught proofing, suitable for timber sash, doors and casement windows.
All prices are per meter, the brush seal will be sent in one continuous length where possible. 
The brushpile is the perfect solution for use in sliding applications and for use in traditional listed buildings. The self-adhesive brushpile makes application easy with a high self-adhesive backing that can be retrofitted into most windows. It provides additional draught resistance on the top and bottom sashes, the meeting rail and is an excellent alternative to cheaper seals . It is now available in 3 different heights to suit your gap size.
- Ideal for retro fitting around sash windows, to avoid routing during refurbishment, but can also be used on casement windows and doors
- Suitable for surface mounting
- No carrier required
- 4, 6 & 8mm high options
- Secured by a high strength self-adhesive tape
- 4mm (high x 15mm (wide) will seal a gap from 1.5mm to 3.0mm
- 6mm (high x 15mm (wide) will seal a gap from 3.0mm to 5.0mm
- 8mm (high x 20mm (wide) will seal a gap from 4.0mm to 7.0mm
- Can be used all around the sash, including the head jamb and the cill.
- Secured by a high strength self-adhesive tape
- Ends can be secured with staples if required, we recommend stainless steel
- Available in white only
Fitting Tip – On application the surface must be clean and dry, free from any surface oils, dirt or sawdust etc. Failure to do so may result in delamination or poor adhesion of the seal to the substrate. To achieve excellent adhesion, apply seal to clean dry surfaces.
