2.1m Garex Garage Door Draught Excluder

UK Mainland Deliveries Only

Gold & Silver Draft Excluders

7' Foot - 84" Inches Exitex Garex Garage Door Draught Excluders

The Replacement Seal Only 2134mm - This is a replacement seal only and does not include the aluminium Garex.

The Replacement Seal Only 4268mm - This is a 14' foot replacement seal only and does not include the aluminium Garex.

This 2134mm garage door draught excluder is suitable for, inward opening, outward opening, and roller-shutter garage doors. This Exitex Garex garage door seal can be fitted to steel, timber and composite doors. (Other colours and lengths up to 4.6m are available on special order).

The Exitex Garex garage draught excluder is also a weather deflector and is supplied with end caps to neatly conceal any sharp corners and raw edges.

This Garex garage draught excluder has been designed to prevent rain, draughts, dust and snow entering underneath exterior garage doors. A little care in correct fitting will ensure long, efficient and satisfactory service. Please note the following stages of installation.

If necessary cut the Garex garage draught excluder to length. The correct measure is taken across the outside edges of the door less 6mm for Protective Weather Deflecting End Caps. Ensure the bottom sealing blade and Surface seal are left 10mm longer than the aluminium. Or, if you have an inward opening side hinged garage door and your door frame has a rebate, measure the actual door width if you prefer to notch the Garex into the door frame rebate.

When the Garex weather deflector is cut to the correct length, leave the sealing blade extending by 5mm at each end, pinch the end of the seal retaining channel on both sides of the door. This ensures that the sealing blade remains in position during opening and closing of the door.

Carefully Install End Caps As Follows; slightly flatten the fins on anchoring tongue and push the aluminium into the entire recess in the End Cap, a small amount of Elast-O-Seal sealant will help retention, a gentle tap will ensure they are seated correctly. DO NOT TRY TO INSERT END CAPS ONCE GAREX DOOR BASE DEFLECTOR IS FITTED TO THE DOOR.

Any questions? why not contact us today