•         PART NO: E932
•         TYPE: SWITCH MODE STEP DOWN BATTERY CHARGER
•         CHARGING CURRENT: 15 AMP
•         INPUT VOLTAGE: 18 TO 30V DC
•         OUTPUT VOLTAGE: 14V DC
•         CONTROL INPUT VOLTAGE (CVIN): CHARGER ENABLED:  >26.5V DC / CHARGER DISABLED: < 25V DC
•         OVERLOAD PROTECTION: YES
•         POLARITY PROTECTED: EXTERNAL FUSE
•         HIGH TEMP PROTECTED: YES
•         SHORT CIRCUIT PROTECTION: YES
•         EFFICIENCY: > 90%
•         DIMENSIONS: 155mm X 70mm X 53mm
•         FIXING CENTRES: 138mm X 40mm (4 HOLE FIXING)
•         HOLE SIZE: 4.5mm
•         WEIGHT: 447g
•         CONSTRUCTION: ANODISED COOLING PROFILE

 

The Battery Charger can be wired in 2 ways:-

Wired as a fully automatic Charger

The Brown Control Wire is wired directly to the +ve Connection of the Cranking (Donor) Battery to switch the Charger on and off automatically. In this case the Control Wire senses the Cranking (Donor) Battery Voltage and switches the Charger on only when the Cranking (Donor) Battery is being charged.

The Unit automatically controls the maximum charge into the Leisure (Recipient) Battery preventing it from becoming over-charged / damaged and prevents the Cranking Battery (Donor Battery) from becoming flat / exhausted.

Wired as a manually operated Charger

The Brown Control Wire is wired via a Switch to the +ve Connection of the Cranking (Donor) Battery to switch the Charger on and off manually. In this case the Operator can control when the Battery Charger is switched on or off.

If left on, the Unit will automatically control the maximum charge into the Leisure (Recipient) Battery preventing it from becoming over-charged / damaged and prevent the Cranking Battery (Donor Battery) from becoming flat / exhausted.

Our Product Ref: GP1398

 

MODELS ALSO AVAILABLE: 30AMP / 45AMP / 60AMP / 75AMP / 90AMP

Alternative Model available..............

Model E770 15A 24V – 12V Battery Charger (please see eBay item number 

230620464901)

This model is most suitable where there is a constant power source and the Battery Charger will run all the time.

Alternatively you can connect the brown lead directly to any +ve connection which becomes live when the ignition is switched on which will enable you to run the battery charger only when the engine is running

======================================================================================================================================================================================== 

 

OEM AND TRADE ENQUIRIES WELCOME

 

WE ALSO MANUFACTURE:

·        Battery Management Systems

·        Split Charge Controllers

·        DC-DC Battery Chargers

·        DC-DC Voltage Converters

·        Trailer Voltage Converters

·        Battery Status Indicators

·        Voltage Sensitive Switches

·        Water Level Monitors

·        Water Level Probes

·        Temperature Monitors

·        Temperature Probes

·        Air Conditioning Fan Control Units

·        Vehicle Flashers and Interrupters

·        Light Control Units

·        Oil Level Monitors

·        Oil Level Probes

·        Hydraulic Control Units

·        Audible Warning Devices

·        Reversing Alarms

·        Timers

·        Vehicle Safety and Security Units

·        Digital Speed Switches

·        Solenoid Controllers

·        Relays, Connectors, Lamps, Switches

·        Earth Straps

·        Looms and Wiring Harnesses

·        Transformer and Coil Winding

·        Mechanical Assembly

·        Special Purpose Electrical / Electronic Assembly

·        Encapsulation and Formal Coating

·        Vacuum Formed Parts

·        Printed Circuit Board Assembly