This auction is for
one Set of 4
Injector Dynamics ID1050X
High Resistance, saturated fuel injectors. These
injectors are IN STOCK, on our shelves.
Nominal Flow Rate – 1065cc/min @ 43.5
psi (3 Bar)
Maximum Differential Fuel Pressure – 10.0 Bar
(145.0 psi)
Fuel Compatibility – Compatible With All Known
Fuels
Electrical Connector – EV6 / USCAR *No Adaptor,
Orange lower o-ring*
Please view the details section below to verify
these are the correct injectors for your
application
Wholesale Distribution
available, contact us and we can create a
special listing for you!
Wholesale Distribution available,
contact us and we can create a special listing
for you!
Description:
The ID1050X was the first offering from
Injector Dynamics, and was also the first to
offer a number of innovative features to the
motorsport community. This series of
innovations and "firsts" have made it the most
popular - and most copied - injector on the
market today. With a maximum pressure
capability of 7 bar and smooth response at low
flow, this is a versatile injector that will
be at home in many different applications.
From high power high boost daily drivers, to
NHRA Pro Stock Motorcycles and record setting
turbo road race sedans, the ID1050X set the
standard and marked the beginning of a new era
in fuel injector performance.
-The first injector offered with full dynamic
characterization providing tuners with the
data they needed to do their job properly.
-The first injector to be offered in dead time
matched sets.
-The first high impedance high flow injector
available providing stock idle and drivability
on engines as small as 325cc per cylinder.
-The first injector offered with the now
standard "Top Hat Adapter" making it plug and
play in nearly any application.
These Injector Dynamics fuel injectors will
fit many applications, including, but not
limited to:
1992-2002 Honda Accord: F / H - Series
1988-2000 Honda Civic: B / D / H / F -
Series
1990-2001 Acura Integra: B / H - Series
1992-2001 Honda Prelude: F / H - Series
Specifications:
Typical Flow
Rate in CC per minute: 1065cc/min @ 3.0 Bar
(43.5 psi) Using Iso Octane at 52 Degrees C
(125 Degrees F)
Maximum Differential Fuel Pressure – 10.0
Bar (145.0 psi)
Fuel Compatibility – Compatible With All
Known Fuels – (Designed Specifically for
Alternative Fuels)
Electrical connector type: EV6 / USCAR *No
Adaptor, Orange lower o-ring*
Injector Body Design: Metal and composite
plastic
O-Rings Included: Yes, on the injectors
Length of injector from o-ring to o-ring:
48mm
Diameter of top o-ring / fuel rail bore:
14mm
Diameter or style lower o-ring or cushion:
15mm - late model GM lower o-ring
Slope and Offset vs. Pressure data available
upon request.
All
high performance injectors will
require ECU tuning for proper
performance.
We have injectors
to fit almost every performance application!
Check out our eBay
Store or contact us
|
